Kiyotaka Ikejo

发表

MPT-04 DEVELOPMENT OF A WALKING ASSISTANCE APPARATUS USING A SPATIAL PARALLEL LINK MECHANISM(MECHANICAL MOTION AND POWER TRANSMISSION SYSTEMS)

Eiichirou Tanaka, Tadaaki Ikehara, Kazuteru Nagamura, 2009 .

1209 A Diagnosis Method for Gear Damage Based on Empirical Mode Decomposition and Support Vector Machines

Kazuteru Nagamura, Kiyotaka Ikejo, Qingrong Fan, 2014 .

Driving Performance of High Reduction Planetary Gear Drive With Meshing of Arc Tooth Profile Gear and Pin Roller

Eiichirou Tanaka, Kazuteru Nagamura, Kiyotaka Ikejo, 2007 .

Analysis of Torsional Vibration in Power Circulating-Type Internal Gear Testing Mahcine.

Kazuteru Nagamura, Kiyotaka Ikejo, 1996 .

Study on friction loss of internal gear drives. Influence of pinion surface finishing, gear speed and torque.

Kazuteru Nagamura, Kiyotaka Ikejo, Yoshio Terauchi, 1991 .

Vibration and Noise of Internal Gear Drive.

Kazuteru Nagamura, Kiyotaka Ikejo, Yoshio Terauchi, 1994 .

Diagnosis of gear damage based on coefficient of variation method by analyzing vibration accelerations on one gear tooth

Kiyotaka Ikejo, Qingrong Fan, Kazuteru Nagamura, 2016 .

2304 Development of a Power-Assist Machine for the Upper Limb

Eiichirou Tanaka, Tadaaki Ikehara, Kazuteru Nagamura, 2008 .

Easy set-up and in situ automatic gear diagnostic system using only laser reflection

Eiichirou Tanaka, Kazuteru Nagamura, Kiyotaka Ikejo, 2016 .

Development of a walking assist machine supporting whole legs from their soles

Toru Omata, Eiichirou Tanaka, Tadaaki Ikehara, 2006 .

Vibration Characteristics and Surface Durability of Non-Involute Helical Gear

Kiyotaka Ikejo, Kazuteru Nagamura, Florin Gabriel Tutulan, 2004 .

Development of Closed-Fitting-Type Walking Assistance Device for Legs with Self-Contained Control System

Eiichirou Tanaka, Tadaaki Ikehara, Kazuteru Nagamura, 2010, J. Robotics Mechatronics.

5124 Wear of Free Cutting Brass Spur Gears

Masatoshi Yoshikawa, Eiichirou Tanaka, Kiyotaka Ikejo, 2006 .

3641 Development of a Self-Contained Walking Assist Machine without Fixation on Legs toward the Practical Use

Eiichirou Tanaka, Tadaaki Ikehara, Kazuteru Nagamura, 2008 .

Surface Failure of Spur Gears Lubricated with Biodegradable Oil(Machine Elements, Design and Manufacturing)

Kazuteru Nagamura, Kiyotaka Ikejo, Koki Takeda, 2010 .

Effect of Traction Oil on Power Loss of Spur Gear Drive(Machine Elements, Design and Manufacturing)

Kazuteru Nagamura, Kiyotaka Ikejo, Teruhide Sato, 2009 .

Gear damage diagnosis and classification based on support vector machines

Kazuteru Nagamura, Kiyotaka Ikejo, Qingrong Fan, 2014 .

2945 差動歯車を用いた上肢装着型作業補助機構の開発(S57-4 機構・トラクション・ベルト,S57 伝動装置の基礎と応用)

Eiichirou Tanaka, Tadaaki Ikehara, Kazuteru Nagamura, 2007 .

Easy set-up and in situ automatic gear diagnostic system using laser beam reflection (development of a new method enables to remove effects of the rotational fluctuation instead of a rotary encoder)

Eiichirou Tanaka, Kiyotaka Ikejo, Kazuteru Nagamura, 2014 .

Self-Locking of 2S-C Type Planetary Gear Train Composed of External Gears

Kazuteru Nagamura, Kiyotaka Ikejo, Tuneji Yada, 2009 .

Efficiency and Noise of Plastic Worm Gear with Small Module Tooth

Kazuteru Nagamura, Kiyotaka Ikejo, Masato Hata, 2003 .

124 Driving Performance of High Reduction Planetary Gear Drive with Arc Tooth Profile and Pin

Eiichirou Tanaka, Kazuteru Nagamura, Kiyotaka Ikejo, 2007 .

Influence of Center Distance Error on Driving Performance of Involute-Cycloid Composite Tooth Profile Spur Gear

Kazuteru Nagamura, Kiyotaka Ikejo, Natsuhiko Seyama, 2011 .

Design of Involute-Cycloid Composite Tooth Profile Spur Gear to Reduce the Influence of Center Distance Error on Driving Performance

Kazuteru Nagamura, Kiyotaka Ikejo, Natsuhiko Seyama, 2011 .

On the heat balance of gear equipment. On a method for predicting the bulk temperature rise of gears and temperature rise of oil with dip cooling.

Kazuteru Nagamura, Kiyotaka Ikejo, Yoshio Terauchi, 1991 .

Simulation on the vibration characteristics of elliptical gears

Xing Liu, Kazuteru Nagamura, Kiyotaka Ikejo, 2013 .

Efficiency of Plastic Worm Gear with Small Module Tooth

Kazuteru Nagamura, Kiyotaka Ikejo, Masato Hata, 2002 .

DAMAGE DIAGNOSIS OF GEAR TOOTH SURFACE WITH NEAREST NEIGHBOR METHOD

Kazuteru Nagamura, Kiyotaka Ikejo, Kosuke Okada, 2017 .

A Prediction Method of Wear on Tooth Surface for Spur Gears

Kazuteru Nagamura, Kiyotaka Ikejo, Shinya Nakagawa, 2013 .

Analysis of the Dynamic Characteristics of Elliptical Gears

Kazuteru Nagamura, Kiyotaka Ikejo, Xing Liu, 2012 .

Effect of Contact Ratio on Friction Loss of Internal Gear Drives.

Tsuneji Yada, Kazuteru Nagamura, Kiyotaka Ikejo, 1992 .

Diagnosis for gear tooth surface damage by empirical mode decomposition in cyclic fatigue test

Kazuteru Nagamura, Kiyotaka Ikejo, Qingrong Fan, 2014 .

114 インボリュート・サイクロイド合成歯形歯車の中心距離誤差と運転性能

Kazuteru Nagamura, Kiyotaka Ikejo, Florin Gabriel Tutulan, 2003 .

Driving performance and strength of pin-rack gear mechanism using a trochoid tooth profile

Eiichirou Tanaka, Kazuteru Nagamura, Kiyotaka Ikejo, 2007 .

Influence of Circumferential Speed and Relative Contact Position of Rollers on Rippling Failure.

Kazuteru Nagamura, Kiyotaka Ikejo, Minoru Nohara, 2001 .

226 Development of a Walking Assist Machine using a Spatial Parallel Link Mechanism

Eiichirou Tanaka, Tadaaki Ikehara, Kazuteru Nagamura, 2007 .

Analysis of Torsional Vibration in Elliptical Gears

Kazuteru Nagamura, Kiyotaka Ikejo, 2014 .

918 Design of Gear Pumps with Non-Involute Tooth Profile

Kazuteru Nagamura, Kiyotaka Ikejo, Masanobu Ueda, 2000 .

Design and performance of gear pumps with a non-involute tooth profile

Kazuteru Nagamura, Kiyotaka Ikejo, Florin Gabriel Tutulan, 2004 .

Detection of Damaged Tooth by Support Vector Machines

Kazuteru Nagamura, Kiyotaka Ikejo, Qing Rong Fan, 2014 .

122 Development of Hybrid Controlled Walking Assist Machine Using Flexible-Shaft

Eiichirou Tanaka, Tadaaki Ikehara, Kazuteru Nagamura, 2007 .

2P2-F03 Development of a Power-Assist Machine for the Upper Limb Using Differential Gears and Application to a Power-Assist Unit Construction System

Eiichirou Tanaka, Tadaaki Ikehara, Kazuteru Nagamura, 2008 .

Application of statistical parameters and discrete wavelet transform to gear damage diagnosis

Kazuteru Nagamura, Kiyotaka Ikejo, Qingrong Fan, 2014 .

GUDA-11 DESIGN AND PERFORMANCE OF GEAR PUMPS WITH NON-INVOLUTE TOOTH PROFILE(GEAR UNIT DESIGN AND APPLICATIONS)

Kazuteru Nagamura, Kiyotaka Ikejo, Masanobu Ueda, 2001 .

S1160201 Damage Diagnosis of Gear Tooth Surface with Pattern Recognition

Kazuteru Nagamura, Kiyotaka Ikejo, Masato Kawada, 2014 .

Applying a Manipulator with a Laser Sensor to a Portable Device for Gear Surface Diagnosis

Kiyotaka Ikejo, Jyun-Rong Zhuang, Eiichiro Tanaka, 2020 .

Study on the walking support machine indoors by assisting whole legs

Eiichirou Tanaka, Tadaaki Ikehara, Kazuteru Nagamura, 2007 .

Friction Loss of Non-Involute Tooth Profile Gears

Kiyotaka Ikejo, Florin Gabriel Tutulan, Kazutero Nagamura, 2005 .

1310 Design of Involute-cycloid Composite Tooth Profile Spur Gear to Reduce the Influence of Center Distance Error on Driving Performance

Kazuteru Nagamura, Kiyotaka Ikejo, Natsuhiko Seyama, 2010 .

Diagnosis of gear damage based on coefficient of variation method by analyzing vibration accelerations on one gear tooth

Kazuteru Nagamura, Kiyotaka Ikejo, Qingrong Fan, 2016 .

In situ diagnosis of a gear-tooth surface damage using laser scattering

Eiichirou Tanaka, Kazuteru Nagamura, Kiyotaka Ikejo, 2011 .

Optimum Design of the Involute-Cycloid Composite Tooth Profile Helical Gear

Kazuteru Nagamura, Kiyotaka Ikejo, Florin Gabriel Tutulan, 2004 .

Power Loss of Spur Gear Drive Lubricated With Traction Oil

Kazuteru Nagamura, Kiyotaka Ikejo, 2003 .