Dheyaa J. Jasim

发表

A Review of the Natural Gas Purification from Acid Gases by Membrane

M. Abid, T. Mohammed, Dheyaa Jasim, 2022, Engineering and Technology Journal.

Adsorption of aniline from aqueous solutions onto a nanoporous material adsorbent: isotherms, kinetics, and mass transfer mechanisms

T. Albayati, H. Majdi, N. S. Ali, 2023, Water Practice & Technology.

Carbon Dioxide Huff and Puff as Environmentally Friendly Method for Enhanced Heavy Oil Recovery

J. R. Al-Assal, H. F. M. Ameen, Dheyaa J. Jasim, 2023, IOP Conference Series: Earth and Environmental Science.

Investigating the effect of the number of layers of the atomic channel wall on Brownian displacement, thermophoresis, and thermal behavior of graphene/water nanofluid by molecular dynamics simulation

S. Salahshour, M. Shamsborhan, Navid Nasajpour-Esfahani, 2023, Case Studies in Thermal Engineering.

Molecular dynamics simulation of mechanical and oscillating characteristics of graphene nanosheets with zigzag and armchair edges

S. Salahshour, Dheyaa J. Jasim, M. Hekmatifar, 2024, Results in Physics.

Artificial Neural Network Modeling of Thermal Characteristics of WO3-CuO (50:50)/Water Hybrid Nanofluid with a Back-Propagation Algorithm

S. Salahshour, Mohamad Khaje khabaz, Sheida Baghaei, 2024, Materials Today Communications.

Multi-objective optimization of rheological behavior of nanofluids containing CuO nanoparticles by NSGA II, MOPSO, and MOGWO evolutionary algorithms and group method of data handling artificial neural networks

S. Salahshour, Mohammad Rostamzadeh-Renani, Reza Rostamzadeh-Renani, 2024, Materials Today Communications.

Obtaining an accurate prediction model for viscosity of a new nano-lubricant containing multi-walled carbon Nanotube-Titanium dioxide nanoparticles with oil SAE50

Mohamad Khaje Khabaz, S. Salahshour, S. A. Eftekhari, 2023, Tribology International.

Multi-criteria/comparative analysis and multi-objective optimization of a hybrid solar/geothermal source system integrated with a carnot battery

Ali E. Anqi, W. Aich, W. Rajhi, 2024, Case Studies in Thermal Engineering.

Experimental study of phase change material (PCM) based spiral heat sink for the cooling process of electronic equipment

S. Salahshour, Salema K. Hadrawi, Ghassan Fadhil Smaisim, 2024, Ain Shams Engineering Journal.

Utilizing a Copper Foam Electrode as the Catalyst in Sonogashira C-H Activation Coupling Reactions for the Electro-Oxidation Synthesis of Diphenylethyne Derivatives

Z. Alaridhee, Dheyaa J. Jasim, Abhinav Kumar, 2024, Journal of Molecular Structure.

Technical and financial feasibility of a chemicals recovery and energy and water production from a dairy wastewater treatment plant

Dheyaa J. Jasim, Mohammad Marefati, A. Basem, 2024, Scientific reports.

The usage of non-aligned multi-circular winding injectors for efficient fuel mixing inside the scramjet engine

L. Kolsi, Aboulbaba Eladeb, Dheyaa J. Jasim, 2024, Energy.

A fuel gas waste heat recovery-based multigeneration plant integrated with a LNG cold energy process, a water desalination unit, and a CO2 separation process

L. Kolsi, W. Aich, Dheyaa J. Jasim, 2024, Heliyon.

Changes in mechanical properties of copper-silver matrix welded by the iron blade by increasing initial pressure: A molecular dynamics approach

S. Salahshour, Navid Nasajpour-Esfahani, Dheyaa J. Jasim, 2023, Ain Shams Engineering Journal.

Enhanced Dye-sensitized Solar Cell Performance and Electrochemical Capacitive Behavior of Bi-Functional ZnO/NiO/Co3O4 Ternary Nanocomposite Prepared by Chemical Co-precipitation Method

J. Giri, S. Suresh, M. Kandasamy, 2024, Journal of Science: Advanced Materials and Devices.

The effect of initial temperature on the mechanical properties of paraffin-reinforced silica aerogel using molecular dynamics simulation: Application in semi-transparent roofs, electric vehicles and building insulation

N. Abu‐Hamdeh, M. Rawa, Dheyaa J. Jasim, 2023, Case Studies in Thermal Engineering.

The effect of initial conditions (temperature and pressure) on combustion of Fe-coated-aluminum hydride nanoparticles using the molecular dynamics approach

S. Salahshour, F. Rashid, Karrar A. Hammoodi, 2023, Case Studies in Thermal Engineering.

Innovative Biomass Waste Heat Utilization for Green Hydrogen Production: A Comparative and Optimization Study of Steam and Organic Rankine Cycles

R. Zainul, Yathrib Ajaj, Dheyaa J. Jasim, 2024, Process Safety and Environmental Protection.

Investigation of free convection in a wavy trapezoidal porous cavity with MWCNT- Fe3O4/Water hybrid nanofluid under MHD effects: Galerkin finite element analysis

S. Salahshour, A. Aissa, Kamel Guedri, 2024, Case Studies in Thermal Engineering.

Numerical investigation of the effect of swirling flow caused by twisted tape in impinging jet's nozzle on heat transfer: Application in cooling of electronic components and turbine blades

M. N. Ajour, N. Abu‐Hamdeh, Saeed Jahangiri, 2023, Journal of the Taiwan Institute of Chemical Engineers.

The effect of amplitude of heat flux on the adsorption of doxorubicin by MOF11 bio-carrier using molecular dynamics simulation

S. Salahshour, Dheyaa J. Jasim, Ali Basem, 2024, International Communications in Heat and Mass Transfer.

A molecular dynamics study of the external heat flux effect on the atomic and thermal behavior of the silica aerogel/ paraffin /CuO nanostructure

S. Salahshour, Dheyaa J. Jasim, Ali Basem, 2024, International Communications in Heat and Mass Transfer.

Investigating the effect of constant heat flux on the adsorption of doxorubicin by bio-MOF-11 biocarrier using molecular dynamics simulation

S. Salahshour, Karrar A. Hammoodi, Dheyaa J. Jasim, 2024, International Communications in Heat and Mass Transfer.