Kwansoo Chung

发表

An Automatic Spring-back Compensation Die Design Method Based on Genetic Algorithm and Isotropic-Kinematic Hardening Laws

Xiao-Xing Li, Jing Hu, Kwansoo Chung, 2011 .

Spring-back Prediction of MS1470 Steel Sheets Based on a Non-linear Kinematic Hardening Model

Taejoon Park, Kwansoo Chung, Toshihiko Kuwabara, 2013 .

Influence of back stresses in parts forming on crashworthiness

Chung-Souk Han, Kwansoo Chung, Myoung-Gyu Lee, 2005 .

Direct Design Method Based on Ideal Forming Theory for Hydroforming and Flanging Processes

Kwansoo Chung, Jeong Whan Yoon, 2005 .

Analysis of failure of resistance spot welding for advanced high strength steel

Kwansoo Chung, Youngwoo Koh, Xin Yang, 2013 .

Springback prediction for sheet metal forming process using a 3D hybrid membrane/shell method

Dong Yol Yang, Kwansoo Chung, Jeong Whan Yoon, 2002 .

Incorporation of Sheet-Forming Effects in Crash Simulations Using Ideal Forming Theory and Hybrid Membrane and Shell Method

Chung-Souk Han, Kwansoo Chung, Jeong Whan Yoon, 2005 .

Application of ideal forming design theory for multi-step flanging processes

Kwansoo Chung, Jeong Whan Yoon, F. Pourboghrat, 2001 .

Drape Simulation of Woven Fabrics by Using Explicit Dynamic Analysis

Kwansoo Chung, Tae Jin Kang, W. R. Yu, 2000 .

Improvement of Drawability Based on Local Surface Friction Stir Process for Aluminum Alloy Sheets

Kwansoo Chung, Sangjoon Park, Sung-Joon Kim, 2008 .

Forming Analysis and Design for Hydroforming

Kwansoo Chung, 2005 .

Spring-back evaluation of automotive sheets based on isotropic–kinematic hardening laws and non-quadratic anisotropic yield functions, part III: applications

Kwansoo Chung, Daeyong Kim, Chongmin Kim, 2005 .

Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions: Part I: theory and formulation

Frédéric Barlat, Kwansoo Chung, Daeyong Kim, 2005 .

A modified damage model for advanced high strength steel sheets

Ning Ma, Kwansoo Chung, Taejoon Park, 2011 .

Formability of TWIP (twinning induced plasticity) automotive sheets

Kwansoo Chung, K. Chung, Kanghwan Ahn, 2011 .

Macro-performance evaluation of friction stir welded automotive tailor-welded blank sheets: Part II – Formability

Kwansoo Chung, Daeyong Kim, Robert H. Wagoner, 2010 .

Semi-Analytic Hybrid Method to Predict Springback in the 2D Draw Bend Test

Kwansoo Chung, R. H. Wagoner, Daeyong Kim, 2007 .

Experimental and numerical study on formability of friction stir welded TWB sheets based on hemispherical dome stretch tests

Kwansoo Chung, R. H. Wagoner, Robert H. Wagoner, 2009 .

Optimization of boost condition and axial feeding on tube bending and hydro-forming process considering formability and spring-back

Kwansoo Chung, Chongmin Kim, Wonoh Lee, 2009 .

Effect of Pre-strain on Anisotropic Hardening and Springback Behavior of an Ultra Low Carbon Automotive Steel

Kwansoo Chung, Toshihiko Kuwabara, Rahul K. Verma, 2011 .

Numerical simulation of friction stir spot welding process for aluminum alloys

Kwansoo Chung, Robert H. Wagoner, Dongun Kim, 2010 .

Macro-performance evaluation of friction stir welded automotive tailor-welded blank sheets: Part I - Material properties

Kwansoo Chung, R. H. Wagoner, Daeyong Kim, 2010 .

Experimental and numerical investigation of combined isotropic-kinematic hardening behavior of sheet metals

Kwansoo Chung, Hang Shawn Cheng, Jian Cao, 2009 .

Three-dimensional finite-element method simulations of stamping processes for planar anisotropic sheet metals

Y. T. Keum, Frédéric Barlat, Kwansoo Chung, 1997 .

Ideal sheet forming with frictional constraints

Owen Richmond, Kwansoo Chung, Jeong Whan Yoon, 2000 .

Non-orthogonal constitutive equation for woven fabric reinforced thermoplastic composites

Kwansoo Chung, Tae Jin Kang, Farhang Pourboghrat, 2002 .

Extension of quasi-plastic-elastic approach to incorporate complex plastic flow behavior - application to springback of advanced high-strength steels

Frédéric Barlat, Kwansoo Chung, R. H. Wagoner, 2013 .

Development of viscoelastic/rate-sensitive-plastic constitutive law for fiber-reinforced composites and its applications. Part I: Theory and material characterization

Kwansoo Chung, Hansun Ryou, K. Chung, 2009 .

Parameter identification of advanced plastic strain rate potentials and impact on plastic anisotropy prediction

Frédéric Barlat, Kwansoo Chung, Cristian Teodosiu, 2009 .

Texture evolution of FCC sheet metals during deep drawing process

Frédéric Barlat, Kwansoo Chung, Kyu Hwan Oh, 2000 .

Numerical simulation of friction stir butt welding process for AA5083-H18 sheets

Kwansoo Chung, R. H. Wagoner, Robert H. Wagoner, 2010 .

Inverse characterization method for mechanical properties of strain/strain-rate/temperature/temperature-history dependent steel sheets and its application for hot press forming

Kwansoo Chung, Gyosung Kim, Dongun Kim, 2015, Metals and Materials International.

Constitutive modeling of woven composites considering asymmetric/anisotropic, rate dependent, and nonlinear behavior

Kwansoo Chung, Woong-Ryeol Yu, Hansun Ryou, 2007 .

A hybrid membrane/shell method for calculating springback of anisotropic sheet metals undergoing axisymmetric loading

Kwansoo Chung, Farhang Pourboghrat, K. Chung, 2000 .

Non-associated flow rule with symmetric stiffness modulus for isotropic-kinematic hardening and its application for earing in circular cup drawing

Kwansoo Chung, Taejoon Park, 2012 .

Sheet hydroforming of woven FRT composites: non-orthogonal constitutive equation considering shear stiffness and undulation of woven structure

Kwansoo Chung, Tae Jin Kang, Farhang Pourboghrat, 2003 .

Characterization of mechanical properties by indentation tests and FE analysis -validation by application to a weld zone of DP590 steel

Dongil Kwon, Kwansoo Chung, Chongmin Kim, 2009 .

Experimental analysis of aluminum yield surface for binary AlMg alloy sheet samples

Frédéric Barlat, Kwansoo Chung, Maeda Yasushi, 1998 .

Forming limit criterion for ductile anisotropic sheets as a material property and its deformation path insensitivity. Part I: Deformation path insensitive formula based on theoretical models

Kwansoo Chung, K. Chung, Hyunki Kim, 2014 .

Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions: Part II: characterization of material properties

Kwansoo Chung, R. H. Wagoner, Robert H. Wagoner, 2005 .

An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals

Frédéric Barlat, Kwansoo Chung, R. H. Wagoner, 2008 .

Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions

Kwansoo Chung, R. H. Wagoner, Daeyong Kim, 2005 .

Springback prediction of TWIP automotive sheets

Kwansoo Chung, Dong-hoon Yoo, K. Chung, 2009 .

A Hybrid Membrane/Shell Method for Rapid Estimation of Springback in Anisotropic Sheet Metals

Owen Richmond, Kwansoo Chung, K. Chung, 1998 .

Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate

Frédéric Barlat, Kwansoo Chung, Tudor Balan, 2007 .

A practical two-surface plasticity model and its application to spring-back prediction

Kwansoo Chung, R. H. Wagoner, Daeyong Kim, 2007 .