J. T. Lim

发表

Low angle forward reflected neutral beam source and its applications

S. W. Kim, B. Park, G. Yeom, 2008 .

White top-emitting organic light-emitting diodes using one-emissive layer of the DCJTB doped DPVBi layer

G. Yeom, C. Jeong, J. T. Lim, 2008 .

Roles of humidity and heat treatment temperatures on YBa2Cu3O7−x coated conductors by trifluoroacetic acid-metal organic deposition process

Jinhyun Park, S. M. Hwang, E. Park, 2009 .

Polyimide Surface Treatment by Atmospheric Pressure Plasma for Metal Adhesion

G. Yeom, Jae Beom Park, J. Oh, 2010 .

Characterizations of the Mechanical Properties and Wear Behavior of Ni Plate Fabricated by the Electroforming Process

S. Jung, J. Joo, J. Choi, 2007 .

Fabrication and Characterizations of Nickel Metal Mask with fine Pitch by Additive Process

S. Jung, S. M. Hwang, E. Park, 2007 .

Synthesis and characteristics of bis(2,4-dimethyl-8-quinolinolato)(triphenylsilanolato)aluminum (III): A potential hole-blocking material for the organic light-emitting diodes

G. Yeom, J. H. Lee, H. K. Jeong, 2006 .

Enhancing the thermoelectric properties of super-lattice Al2O3/ZnO atomic film via interface confinement

Sang‐Kwon Lee, Jung Hoon Lee, No‐Won Park, 2016 .

Fabrication of two-layer flexible copper clad laminate by electroless-Cu plating on surface modified polyimide

S. Jung, Hoo-Jeong Lee, S. M. Hwang, 2009 .

Characteristics of SiO x Thin Film Deposited by Atmospheric Pressure Plasma-Enhanced Chemical Vapor Deposition Using PDMS ∕ O2 ∕ He

G. Yeom, J. Oh, June-Hee Lee, 2009 .

A study on the microstructural and chemical evolution of In–Ga–Zn–O sol–gel films and the effects on the electrical properties

Hoo-Jeong Lee, Hyungsub Kim, H. Jeon, 2013 .

Atmospheric pressure PECVD of SiO2 thin film at a low temperature using HMDS/O2/He/Ar

J. Park, G. Yeom, J. H. Lee, 2009 .