Simone Malaguti

发表

Development of a Multi-component based Methodology for the Simulation of Reacting High Injection Pressure Diesel Sprays

Giuseppe Cantore, Simone Malaguti, Giuseppe Bagli, 2014 .

A numerical characterization of new high-pressure multi-hole GDI injector

Stefano Fontanesi, Giuseppe Cantore, Simone Malaguti, 2010 .

CFD Investigation of Wall Wetting in a GDI Engine under Low Temperature Cranking Operations

Stefano Fontanesi, Giuseppe Cantore, Simone Malaguti, 2009 .

A New Decoupled CFD and FEM Methodology for the Fatigue Strength Assessment of an Engine Head

Matteo Giacopini, Stefano Fontanesi, L. Arnone, 2008 .

CFD Methodology Assessment for the Investigation of Convective Heat Transfer Properties of Engine Coolants Under Boiling Conditions

Stefano Fontanesi, Simone Malaguti, E. V. McAssey, 2009 .

CFD Investigation of Fuel Film Formation Within a GDI Engine Under Cold Start Cranking Operation

Stefano Fontanesi, Simone Malaguti, S. Fontanesi, 2009 .

Effects of relative port orientation on the in-cylinder flow patterns in a small unit displacement HSDI Diesel Engine

Stefano Fontanesi, Giuseppe Cantore, Vincenzo Gagliardi, 2005 .

Nina Bishara, Simone Malaguti, 2008 .

MODELLING OF PRIMARY BREAKUP PROCESS OF A GASOLINE DIRECT ENGINE MULTI-HOLE SPRAY

Luigi Allocca, Alessandro Montanaro, Stefano Fontanesi, 2013 .

Experimental and Numerical Characterization of Gasoline-Ethanol Blends from a GDI Multi-Hole Injector by Means of Multi-Component Approach

Luigi Allocca, Alessandro Montanaro, Simone Malaguti, 2013 .

Thermo-mechanical analysis of an engine head by means of integrated CFD and FEM

Matteo Giacopini, Stefano Fontanesi, Antonio Strozzi, 2007 .

Multidimensional Cycle Analysis on a Novel 2-Stroke HSDI Diesel Engine

Enrico Mattarelli, Stefano Fontanesi, Simone Malaguti, 2007 .

Investigation of Mixture Formation Process in a HDDI Diesel Engine by CFD and Imaging Technique

Luigi Allocca, M. Auriemma, Gerardo Valentino, 2005 .

ICLASS 06-189 DETAILED EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE SPRAY STRUCTURE IN A GDI HIGH-PRESSURE SWIRL INJECTOR

Gerardo Valentino, Stefano Fontanesi, Simone Malaguti, 2006 .

CFD parametric analysis of the combustion chamber shape in a small HSDI Diesel engine

Enrico Mattarelli, Stefano Fontanesi, Simone Malaguti, 2005 .

CFD-3D Multi-Cycle Analysis on a New 2-Stroke HSDI Diesel Engine

Enrico Mattarelli, Stefano Fontanesi, Giuseppe Cantore, 2009 .