Yukio Ueda

发表

APPLICATION OF CAE TO HULL PRODUCTION

Okumoto, Yukio Ueda, H Murakawa, 1994 .

ON THE LOCAL BUCKLING STRENGTH OF A SUPER TANKER-BUCKLING STRENGTH OF WEB PLATES WITH CUT-OUTS FOR LONGITUDINALS-

Yukio Ueda, Koh Nishimaki, Masakatsu Matsuishi, 1971 .

Strength and Rigidity of Triangular Corner Brackets

Yukio Ueda, Yoshio Kuramoto, Tetsuya Yao, 1976 .

The proceedings of the fourth (1994) international offshore and polar engineering conference. Volume 4

J. F. Dos Santos, Yukio Ueda, Yasumitsu Tomita, 1994 .

How can we innovate in the welding research

Yukio Ueda, 1995 .

Ultimate strength of compressed stiffened plates and minimum stiffness ratio of their stiffeners

Yukio Ueda, Tetsuya Yao, 1983 .

Development of Computer-Aided Process Planning System for Plate Bending by Line Heating (Report 2)—Practice for Plate Bending in Shipyard Viewed from Aspect of Inherent Strain

Yukio Ueda, H Murakawa, H. Murakawa, 1994 .

Fundamental Study on Elastic Response of Offshore Structures under Collision

Yukio Ueda, Kouji Ohno, Hidekazu Murakawa, 1986 .

Development of Computer Aided Process Planning System for Plate Bending by Line Heating (Report I) : Relation between the Final Form of Plate and the Inherent Strain(Machanics, Strength & Structural Design)

Yukio Ueda, Yukio Ueda, Yasuhisa Okumoto, 1991 .

Characteristics of Restraint Stress-strain of the Slit Weld in a Finite Rectangular Plate and the Significance of Restraint Intensities as a Dynamical Factor

Yukio Ueda, Keiji Fukuda, You Chul Kim, 1983 .

Dynamical Characteristics of TRC Test and RRC Test(Welding Mechanics, Strength & Design)

Yukio Ueda, Yoshiki Muramatsu, 1984 .

PLATE AND STIFFENED PLATE UNITS OF THE IDEALIZED STRUCTURAL UNIT METHOD (2ND REPORT): UNDER IN-PLANE AND LATERAL LOADING CONSIDERING INITIAL DEFLECTION AND RESIDUAL STRESS

Jeom Kee Paik, Yukio Ueda, Sherif Rashed, 1984 .

“Tubular Joint Elements” in Idealized Structural Unit Method (ISUM) for Strength Analysis of Offshore Structures

Yukio Ueda, Sherif Rashed, Keiji Nakacho, 1986 .

Introduction to Measurement and Prediction of Residual Stresses with the Help of Inherent Strains

Yukio Ueda, Ninshu Ma, Hidekazu Murakawa, 2012 .

On the Local Strength of a Super Tanker

Yukio Ueda, Yoichi Hara, Ko Nishimaki, 1969 .

NEW EFFICIENT AND ACCURATE METHOD OF NONLINEAR ANALYSIS OF OFFSHORE TUBULAR FRAMES (THE IDEALIZED STRUCTURAL UNIT METHOD) (REPORT I): DEVELOPMENTS OF STATIC THEORY AND METHOD

Yukio Ueda, S. M. H. Rashed, K. Nakacho, 1999 .

DEVELOPMENT OF COMPUTER-AIDED PROCESS PLANNING SYSTEM FOR PLATE BENDING BY LINE HEATING (REPORT 1) - RELATION BETWEEN FINAL FORM OF PLATE AND INHERENT STRAIN

Yukio Ueda, H Murakawa, H. Murakawa, 1994 .

Dynamic Elastic-Plastic Response of Frame Structures under Collision

Yukio Ueda, Hidekazu Murakawa, Takashi Ogura, 1985 .

Ultimate Strength Analysis of Double Bottom Structure by Idealized Structural Unit Method(Welding Mechanics, Strength & Design)

Yukio Ueda, Sherif Rashed, Masataka Katayama, 1980 .

Real-Time Simulation Algorithm for an Aircraft and a Missile

Hiroyuki Takano, Yoriaki Baba, Yukio Ueda, 2002 .

Fundamental Study On Elastic Response Of Offshore Structure Under Collision: Classification Of Phenomena Based On Hierarchical Nature Of Deformation

Yukio Ueda, Hidekazu Murakawa, D. Xiang, 1990 .

Development of time-resolved spectroscopy system for quantitative noninvasive tissue measurement

Britton Chance, Yukio Ueda, Mitsuharu Miwa, 1995, Photonics West.

Ultimate Strength of T-Joint in Tubular Frame of Jack-Up Type Oil Rig (Report I) : Experimental Study of Ultimate Strength of Unstiffened and Stiffened T-Joints under Normal Load(Mechanics, Strength & Structure Design)

Yukio Ueda, Masakatsu Matsuishi, Keiji Nakacho, 2000 .

Ultimate Strength of Jack-up Rigs in Survival and Punch-through Conditions(Mechanics, Strength & Structural Design)

Yukio Ueda, Sherif Rashed, Takaaki Ishihama, 1987 .

Minimum Stiffness Ratio of a Stiffener against Ultimate Strength of a Plate (3 rd Report)

Yukio Ueda, Tetsuya Yao, Masanori Nakamine, 1978 .

Applications of Computer and Numerical Analysis Techniques in Welding Research

Yukio Ueda, Hidekazu Murakawa, H. Murakawa, 1984 .

Ultimate Strength of the Double Bottom Stranding on a Rock

Yukio Ueda, Katsuhide Kitamura, Yasuo Yoshida, 1978 .

Ultimate Strength of a Rectangular Plate under Thrust : with Consideration of the Effects of Initial Imperfections due to Welding(Welding Mechanics, Strength & Design)

Yukio Ueda, Tetsuya Yao, 1979 .

ANALYSIS OF ELASTIC-PLASTIC BUCKLING OF PLATES WITH STIFFENERS BY FINITE ELEMENT METHOD

Yukio Ueda, Masakatsu Matsuishi, Kazuo Terazawa, 1972 .

An Ultimate Transverse Strength Analysis of Ship Structure

Yukio Ueda, Rashed Sherif, Y. Ueda, 1974 .

DYNAMIC ELASTIC-PLASTIC ANALYSIS OF OFFSHORE FRAMED STRUCTURES BY PLASTIC NODE METHOD CONSIDERING STRAIN-HARDENING EFFECTS

Masahiko Fujikubo, Yukio Ueda, Yong Bai, 1991 .

Effects of Initial Imperfection due to Welding on Rigidity and Strength of Triangular Corner Bracket

Yukio Ueda, Yoshio Kuramoto, Tetsuya Yao, 1977 .

Development of Computer Aided Process Planing System for Plate Bending by Line-Heating

Yukio Ueda, Ryoichi Kamichika, Morinobu Ishiyama, 1991 .

New Computational Mechanics For Ships And Offshore Engineering From Construction Stage to Structural Collapse Stage

Yukio Ueda, 2007 .

Development of Computer Aided Process Planning System for Plate Bending by Line-Heating (Report II) : Practice for Plate Bending in Shipyard Viewed from Aspect of Inherent Strain(Mechanics, Strength & Structural Design)

Yukio Ueda, Yukio Ueda, Yasuhisa Okumoto, 1992 .

Development of Computer Aided Process Planning System for Plate Bending by Line-Heating

Yukio Ueda, H Murakawa, Ryoichi Kamichika, 1993 .

The Proceedings are registered with the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, USA. For multiple copying for promotional or commercial purposes such as creating new collective works or resale, a written permission from ISOPE is required.

Yukio Ueda, Jin S. Chung, I. Langen, 2001 .

Theoretical Prediction of Welding Distortion Considering Positioning And the Gap Between Parts

Yukio Ueda, Hidekazu Murakawa, Dean Deng, 2001 .