Byung-Taek Kim

发表

Efficiency Optimal Design of a Brushless DC Motor Considering the Magnetization Direction of Permanent Magnet

Jeong-hyun Song, Byung-Taek Kim, 2011 .

Analysis and Optimal Design of Induction Heating Cookers

Byung-Taek Kim, Muhammad Humza, 2016 .

Operation Characteristics of a Small Single-phase Written-pole Motor in Home Appliance

Byung-Taek Kim, Dae-Kyong Kim, Won Yong Lee, 2010 .

Influence on Magnet of Blushless DC Motor due to Load Torque Variation of Reciprocating Compressor

Byung-Taek Kim, Byung-il Kwon, Dae-Kyong Kim, 2008 .

Starting Performance Analysis of 1-phase Line Start Permanent Magnet Motor

Byung-Taek Kim, 2007 .

Design Methodology for Minimal Stator Copper Loss in A Single-phase Induction Motor

Byung-Taek Kim, Byung-il Kwon, Soo-whang Baek, 2008 .

A Study on Analysis of Inverter-fed Induction Motor's Bearing Current using Improved Equivalent Ciruit Parameters

Jung-Pyo Hong, Byung-Taek Kim, Byung-il Kwon, 2007 .

Investigation on the performance of the single-phase LSPM motor for variable capacity type compressor

Young-Kyoun Kim, Byung-Taek Kim, Se-Hyun Rhyu, 2012 .

Design Method of a Direct-Drive Permanent Magnet Vernier Generator for a Wind Turbine System

Byung-Taek Kim, Byungtaek Kim, 2019, IEEE Transactions on Industry Applications.

Torque ripple minimization in a BLDC motor using an improved voltage control method

Byung-Taek Kim, Ho-hyun Kim, Jin-Soek Jang, 2010 .

Improvement of torque characteristics of permanent magnet wind generator by FEM and optimization

Han-Seok Park, Byung-Taek Kim, Dae-Kyong Kim, 2010 .

Characteristic analysis of a vernier motor from magnetic perspective

Byung-Taek Kim, Taeyoung Kim, Duk Jin Kim, 2016 .

Optimal design of a single-phase induction motor considering magnetically balanced operation

Jeong-hyun Song, Byung-Taek Kim, Kyung-Il Woo, 2010 .

New Design Method of Induction Motor for Variable Speed Applications

Byung-Taek Kim, Muhammad Humza, Myoun-hyun Choi, 2014 .

Design of an induction motor by pre-determination of equivalent circuit parameters

Byung-Taek Kim, Muhammad Humza, 2016 .

Optimal design of shoe shape to reduce the cogging torque of SPMSM of two type of magnet

Byung-Taek Kim, Jin-Seok Jang, Da-Hee Sim, 2014 .

Analytical Technique for Heat Generating Characteristics of Induction Heating Cookers

Byung-Taek Kim, Muhammad Humza, 2016 .

Optimal design of rotor bars of a written-pole motor by using response surface method for improving the pole-writing performance

Byung-Taek Kim, Seong-Cheol Park, Myoung-Hyun Choi, 2012 .

A design method of a single-phase LSPM using ferrite magnet

Byung-Taek Kim, Myoung-Hyun Choi, 2014 .

Analysis of a PM Vernier Motor With Spoke Structure

Thomas A. Lipo, Byung-Taek Kim, 2016 .

A study on a pole-changing operation of a single-phase written-pole motor

Byung-Taek Kim, Dae-Kyong Kim, Seong-Cheol Park, 2010 .

Design of New Type Universal Motor Using Soft Magnetic Composites

Byung-Taek Kim, 2006 .

Analysis of Torque Characteristics for the Single-phase Induction Motor Considering Space Harmonics

Byung-Taek Kim, Byung-il Kwon, Byung-taek Kim, 2006 .

Design of the Rotary Magnetic Position Sensor With the Sinusoidally Magnetized Permanent Magnet

Byung-Il Kwon, Byung-Taek Kim, Se-Hyun Rhyu, 2007, IEEE Transactions on Magnetics.

Optimal stator slot design of inverter-fed induction motor in consideration of harmonic losses

Byung-Taek Kim, Byung-taek Kim, B. Kwon, 2005 .

Analysis and Design of the Single-phase Line Start Permanent Magnet Motor Considering Overhang Effect

Byung-Taek Kim, Byung-il Kwon, Soo-whang Baek, 2009 .

Analysis of Single-phase Line Start Permanent Magnet Motor Considering Overhang Structure Effect

Byung-Il Kwon, Byung-Taek Kim, Se-Hyun Rhyu, 2006, 2006 12th Biennial IEEE Conference on Electromagnetic Field Computation.

Optimal rotor design for reducing the partial demagnetization effect and cogging torque in spoke type PM motor

Sang-Bong Rhee, Byung-Taek Kim, Byung-il Kwon, 2009 .

Electromagnetic Field and Thermal Linked Analysis of Interior Permanent-Magnet Synchronous Motor for Agricultural Electric Vehicle

Byung-Taek Kim, Daesuk Joo, Ju-Hee Cho, 2011, IEEE Transactions on Magnetics.

Novel position sensorless starting method of BLDC motor for reciprocating compressor

Byung-Il Kwon, Hee-Jun Kim, Byung-Taek Kim, 2009, INTELEC 2009 - 31st International Telecommunications Energy Conference.

Influence of Space Harmonics on Starting Performance of a Single-Phase Line Start Permanent-Magnet Motor

Byung-Taek Kim, Byung-il Kwon, 2006 .

Analysis of IPMSM characteristics considering the temperature change

Byung-Taek Kim, Myoung-Hyun Choi, Bo-Mi Kim, 2014 .

Reduction of electromagnetic force harmonics in asynchronous traction motor by changing rotor slot number

Byung-Il Kwon, Byung-Taek Kim, Seung-Chan Park, 1999, IEEE International Magnetics Conference.

Effect of contact resistance between side-bar and secondary conductors in a linear induction motor with a cage-type secondary

Byung-Taek Kim, Seung-Chan Park, Byungtaek Kim, 2003 .

A study on the ferromagnetic layer of a single-phase written-pole motor in consideration of demagnetizing field intensity

Byung-Taek Kim, Dae-Kyong Kim, Se-Hyun Rhu, 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

Characteristic analysis of a hybrid excited flux switching PM motor by using the equivalent magnetic circuit method

Byung-Taek Kim, Jin-Soek Jang, Jae-Kwang Lee, 2012 .

Reduction of electromagnetic force harmonics in asynchronous traction motor by adapting the rotor slot number

Byung-Taek Kim, Byung-il Kwon, Seung-Chan Park, 1999 .

Analysis of axially non-uniform loss distribution in 3-phase induction motor considering skew effect

Byung-Taek Kim, Cha-Seung Jun, Seung-Chan Park, 1999 .

Correction of the Approximation Error in the Time-Stepping Finite Element Method

Byung-Taek Kim, Myoung-Hyun Choi, Byung-taek Kim, 2009 .

Exciter Design and Characteristic Analysis of a Written-Pole Motor

Byung-Taek Kim, Byung-il Kwon, Se-Hyun Rhyu, 2009 .