Jae-Hong Kim

发表

Comparative analysis on digital models obtained by white light and blue LED optical scanners

Ji-Hwan Kim, Jae-Hong Kim, Seog-Soon Choi, 2014 .

Numerical Analysis about Pile Reinforcement Effect for Restraint of Lateral Displacement Occurring in the Embankment on Soft Ground

Jae-Hong Kim, 2011 .

Comparison of the structural characteristics and surface morphology of ZnO thin films grown on various substrates by pulsed laser deposition

Cheon Lee, Kyoung-Cheol Lee, Jae-Hong Kim, 2003, International Symposium on Laser Precision Microfabrication.

Reliability, accuracy of evaluations obtained from CEREC $^{(R)}$ AC system digital impression: an in-vitro study

Ji-Hwan Kim, Hae-Young Kim, Woong-Chul Kim, 2012 .

Effect of Spot-Weld Line Orientation on Formability for Patchwork Blank

Byung-Min Kim, Jae-Hong Kim, Kwang Young Ye, 2017 .

Ventilation Performance According to Outdoor and Operating Conditions of the Vertical Exhaust Duct System in High Riser Public Houses

Young-Bae Kim, Myeong-Ho Lee, Jaeyong Sung, 2011 .

Evaluations of the Accuracy and Reliability of Measurements Made on White Light Scanner-based Dental Digital Models

Ki-Baek Kim, Jae-Hong Kim, 2012 .

Boron rejection by reverse osmosis membranes: national reconnaissance and mechanism study - phase 1

Jess Brown, Jae-Hong Kim, Jae-Hong Kim, 2006 .

An Experimental Verification on the Efficiency of Geosynthetics on Crushed Stone Layer

Min-Cheol Park, Heui-Soo Han, Eun-Sang Im, 2013 .

Development of seat side frame by sheet forming of DP980 with die compensation

Byung-Min Kim, Dae-Cheol Ko, Jae-Hong Kim, 2017 .

Technical Characteristics of SMRT07TM New Friction Type Top Bracing

Jae-Kwang Eom, Jae-Hong Kim, Yooseok Song, 2009 .

Cycling Performance of Lithium-Oxygen Batteries Assembled with Hybrid Electrolytes

Dong-Won Kim, Jae-Hong Kim, Hyun-Sik Woo, 2016 .

Using 3D LIF to investigate and improve performance of a multichamber ozone contactor

Jae-Hong Kim, Dooil Kim, Philip J. W. Roberts, 2010 .

Cycling Performances of Lithium-Air Batteries Assembled with Ionic Liquid-Based Electrolytes

Sang-Min Han, Dong-Won Kim, Jae-Hong Kim, 2014 .

Evaluation of Marginal Gap of Three Unit Metal Cores Fabricated by 3-Dimensional Printing Technique

Ki-Baek Kim, Jae-Hong Kim, Won-Soo Kim, 2015 .

Development of a partition panel of an Al6061 sheet metal part for the improvement of formability and mechanical properties by hot forming quenching

Dae-Cheol Ko, Joon-Hong Park, Jae-Hong Kim, 2017 .

Reliability and Accuracy of Digital Impression Obtained from CS-3500 Intraoral Scanner

Jae-Hong Kim, Sa-Hak Kim, Chong-Kyen Kim, 2015 .

Optimal Design of Dynamic Absorbers for the Suppression of Beam Vibration Excited by Impulse

Jae-Hong Kim, Jae-Hong Kim, Byoung-Duk Lim, 2003 .

Evaluation of Pile Spacing Ratio of Stabilizing Piles for Ground Destruction Reduction at the Time of Soft Ground Excavation

Jae-Hong Kim, 2016 .

Marginal fit evaluation of 3 unit fixed dental prostheses fabricated by rapid prototyping method

Hae-Young Kim, Woong-Chul Kim, Ji-Hwan Kim, 2012 .

The Influence of Different Gypsum Materials on the Accuracy from Complete Arch Digital Impression

Jae-Hong Kim, Gyeong-Tak Lee Hae-Young Kim Ki-Baek Kim, Jae-Hong Kim, 2012 .

Single‐phase multilevel inverter based on switched‐capacitor structure

Firuz Zare, Minh-Khai Nguyen, Jae-Hong Kim, 2018, IET Power Electronics.

Evaluation of internal adaptation of PMMA 3-unit bridge manufactured by 5-axis milling machine

Woong-Chul Kim, Chong-Myeong Kim, Ji-Hwan Kim, 2016 .

Evaluation of Dimensional Stability of Digital Dental Model Fabricated by Impression Scanning Method

Ki-Baek Kim, Jae-Hong Kim, 2014 .

Evaluation of Discharge Capacity for Gravel mat due to Geosynthetic Using Calibration Chamber Test

Eun-Sang Im, Jae-Hong Kim, 2014 .

Design of a Current Transducer and Over-Current Fault Detection Circuit for Power Strip Applications

Yong-Jae Kim, Min-Seok Kim, Jae-Hong Kim, 2015 .