Andrés Fabián Lasagni

发表

Functionalization of fiber-reinforced plastic based on laser micro structuring

Udo Klotzbach, Jana Gebauer, Andrés Fabián Lasagni, 2019, LASE.

Biomimetic Surface Structuring Using Laser Based Interferometric Methods

Bogdan Voisiat, Sabri Alamri, Andrés Fabián Lasagni, 2018, Applied Sciences.

Supermode supercontinuum generation in the cladding of a photonic crystal fiber

Tobias Baselt, Christopher Taudt, Bryan Nelsen, 2020, LASE.

Beam shaping using two spatial light modulators for ultrashort pulse laser ablation of metals

Dmitriy Mikhaylov, Thomas Kiedrowski, Andrés Fabián Lasagni, 2019, LASE.

Light trapping for flexible organic photovoltaics

Bernhard Glatz, Marcos Soldera, Karl Leo, 2016, Organic Photonics + Electronics.

Optical Properties of Tetrahedral Amorphous Carbon Films and Their Potential for Lab-on-a-Chip

Frank Sonntag, Teja Roch, Andrés Fabián Lasagni, 2015 .

Direct Patterning of Polystyrene-Polymethyl Methacrylate Copolymer by Means of Laser Interference Lithography Using UV Laser Irradiation

Frank Mücklich, Andrés Fabián Lasagni, Diego F. Acevedo, 2008 .

Advanced design of periodical architectures in bulk metals by means of Laser Interference Metallurgy

Frank Mücklich, Andrés Fabián Lasagni, A. Lasagni, 2007 .

Efficiency Enhancement of Organic Solar Cells by Fabricating Periodic Surface Textures using Direct Laser Interference Patterning

Karl Leo, Teja Roch, Andrés Fabián Lasagni, 2012, Advanced materials.

Ultra‐Low Friction on 100Cr6‐Steel Surfaces After Direct Laser Interference Patterning

Teja Roch, Andrés Fabián Lasagni, Matthias Bieda, 2015 .

Nano‐characterization of Cast Structures by FIB‐Tomography

Michael Engstler, Frank Mücklich, Andrés Fabián Lasagni, 2008 .

Two‐ and Three‐Dimensional Micro‐ and Sub‐Micrometer Periodic Structures Using Two‐Beam Laser Interference Lithography

Andrés Fabián Lasagni, A. Lasagni, B. S. Menéndez-Ormaza, 2010 .

Control of cell growth direction by direct fabrication of periodic micro- and submicrometer arrays on polymers

Andrés Fabián Lasagni, Diego F. Acevedo, Denise Langheinrich, 2012 .

Micro-fabrication of high aspect ratio periodic structures on stainless steel by picosecond direct laser interference patterning

Sabri Alamri, Andrés Fabián Lasagni, Alfredo I. Aguilar-Morales, 2018 .

Light Management of Aluminum Doped Zinc Oxide Thin Films by Fabricating Periodic Surface Textures Using Direct Laser Interference Patterning

Teja Roch, Andrés Fabián Lasagni, Sebastian Eckhardt, 2013 .

Laser interference patterning methods: Possibilities for high-throughput fabrication of periodic surface patterns

Andrés Fabián Lasagni, A. Lasagni, 2017 .

On the Interplay of DLIP and LIPSS Upon Ultra-Short Laser Pulse Irradiation

Rainer Kling, Sabri Alamri, Girolamo Mincuzzi, 2019, Materials.

Direct laser interference patterning of planar and non-planar steels and their microstructural characterization

Andreas Wetzig, Andrés Fabián Lasagni, Matthias Bieda, 2013, Metals and Materials International.

Positive Effect of Laser Structured Surfaces on Tribological Performance

Thomas Kiedrowski, Sabri Alamri, Andrés Fabián Lasagni, 2019, Journal of Laser Micro/Nanoengineering.

Advanced Design of Periodical Structures by Laser Interference Metallurgy in the Micro/Nano Scale on Macroscopic Areas

Andrés Fabián Lasagni, 2007 .

Layer‐by‐Layer Interference Lithography of Three‐dimensional Microstructures in SU‐8

Andrés Fabián Lasagni, Suman Das, Dajun Yuan, 2009 .

Direct Fabrication of Periodic Structures on Surfaces Laser interference patterning as new scalable industrial tool

Teja Roch, Andrés Fabián Lasagni, Matthias Bieda, 2011 .

Ultraviolet laser interference patterning of hydroxyapatite surfaces

Teja Roch, Andrés Fabián Lasagni, Kurosch Rezwan, 2011 .

Surface modification of thin tetrahedral amorphous carbon films by means of UV direct laser interference patterning

Eckhard Beyer, Teja Roch, Andrés Fabián Lasagni, 2010 .

Selective laser treatment and laser patterning of metallic and semiconducting nanotubes in single walled carbon nanotube films

O. Jost, Aljoscha Roch, Andreas Leson, 2014 .

Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems

Frank Sonntag, Udo Klotzbach, Andrés Fabián Lasagni, 2017, Micromachines.

Direct fabrication of periodic patterns with hierarchical sub-wavelength structures on poly(3,4-ethylene dioxythiophene)–poly(styrene sulfonate) thin films using femtosecond laser interference patterning

Andrés Fabián Lasagni, Suman Das, David C. Martin, 2010 .

Direct Fabrication of Hierarchical Microstructures on Metals by Means of Direct Laser Interference Patterning

Eckhard Beyer, Andrés Fabián Lasagni, Matthias Bieda, 2010 .

Energy Dependent Processing of Fiber Reinforced Plastics with Ultra Short Laser Pulses

Niels Schilling, Udo Klotzbach, Andrés Fabián Lasagni, 2013 .

Fabrication of Periodic Microstructures in Pentaerythritol Triacrylate Through Femtosecond Laser Interference Two-Photon Polymerization†

Andrés Fabián Lasagni, Suman Das, Dajun Yuan, 2009 .

Increasing Lubricant Film Lifetime by Grooving Periodical Patterns Using Laser Interference Metallurgy

Frank Mücklich, Andrés Fabián Lasagni, A. Lasagni, 2008 .

Direct laser interference patterning of poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) (PEDOT-PSS) thin films

Andrés Fabián Lasagni, Suman Das, David C. Martin, 2009 .

Fabrication of sub-micron surface structures on copper, stainless steel and titanium using picosecond laser interference patterning

Mathias Siebold, Andrés Fabián Lasagni, Matthias Bieda, 2016 .

Controlling the wettability of polycarbonate substrates by producing hierarchical structures using Direct Laser Interference Patterning

Sabri Alamri, Andrés Fabián Lasagni, Alfredo I. Aguilar-Morales, 2018 .