Keiji Okushima

发表

A Contribution to Determination of Tool Change Interval

Susumu Fujii, Keiji Okushima, K. Okushima, 1968 .

A Study of Economical Machining

Katsundo Hitomi, Keiji Okushima, 1964 .

Study on Thermal Deformations of Machine Tools (4th Report)

Yoshiaki Kakino, Keiji Okushima, 1974 .

II. Shooting type device for measurement of mechanical energy produced by hydrospark

Tomoichi Inoue, Katsundo Hitomi, Keiji Okushima, 1963 .

A Sliding-Block Type Cutting Test Apparatus

Keiji Okushima, 1958 .

Closure to “Discussion of ‘An Analysis of the Mechanism of Orthogonal Cutting and Its Application to Discontinuous Chip Formation’” (1961, ASME J. Eng. Ind., 83, p. 555)

Katsundo Hitomi, Keiji Okushima, 1961 .

Flank Wear Progress and Variation of Tool Forces

Katsundo Hitomi, Keiji Okushima, 1963 .

On the Behaviour of Chip in Steel Cutting : Part 2, In the Case of Parallel Type Chip Breaker

Tetsutaro Hoshi, Keiji Okushima, Takashi Fujinawa, 1959 .

Study on the Testing Method of Cemented Carbide Tool : On the critical Value of Flank Wear

Keiji Okushima, Shukichi Nagatomi, Kitao Okusa, 1957 .

Thermal Deformations of Precision Instruments : In Conection with Machine Tools(Minor Special Issue on Precision)

Yoshiaki Kakino, Keiji Okushima, 1972 .

An Analysis of Methods used in Minimising Thermal Deformations of Machine Tools

Yoshiaki Kakino, Keiji Okushima, 1976 .

Study on the High Speed Cutting (1 st Report)

Tokio Sasaki, Keiji Okushima, Hiroshi Matsui, 1948 .

On the Behavior of Chip in Steel Cutting

Keiji Okushima, Kiyoshi Minato, 1959 .

GROUPING PARTS AND MACHINE TOOLS AND PLANNING LAYOUT TO MINIMIZE PRODUCTION COST IN A JOB SHOP

Yoshiaki Kakino, Keiji Okushima, Kensuke Takano, 1976 .

Closure to “Discussion of ‘Optimum Diameter and Position of a Fly Cutter for Milling 0.45 C Steel, 195 BhN and 0.4 C Steel, 167 BhN at Light Cuts’” (1965, ASME J. Eng. Ind., 87, p. 446)

T. Hoshi, Keiji Okushima, 1965 .

Study on the Generating Process of Machined Surface

Yoshiaki Kakino, Keiji Okushima, 1968 .

Study on the Thermal Deformations of Machine Tools (2nd Report)

Yoshiaki Kakino, Keiji Okushima, Toshihiko Kikuchi, 1972 .

A Fundamental Study of Super-High Speed Machining

Norihiko Narutaki, Katsundo Hitomi, Keiji Okushima, 1965 .

The Cutting Temperature

Ryuji Shimoda, Keiji Okushima, K. Okushima, 1957 .

An Analysis of the Mechanism of Discontinuous Chip Formation

Katsundo Hitomi, Keiji Okushima, Chukichi Noda, 1962 .

On the Behaviour of Chip at Steel Cutting

Keiji Okushima, Kiyoshi Minato, K. Okushima, 1958 .