Saurav Goel

发表

On the use of the theory of critical distances with mesh control for fretting fatigue lifetime assessment

Diego Infante-García, Alaitz Zabala, Eugenio Giner, 2020, Tribology International.

Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC)

Anupam Agrawal, Mark Price, Waleed Bin Rashid, 2015, Appl. Soft Comput..

The possibility of performing FEA analysis of a contact loading process fed by the MD simulation data

Stephen C. Veldhuis, Alaitz Zabala, Saurav Goel, 2018 .

Improved and simpler estimation of scale linearity contribution to topography measurement

Saurav Goel, Claudiu Giusca, C. Giusca, 2019, Precision Engineering.

Horizons of modern molecular dynamics simulation in digitalized solid freeform fabrication with advanced materials

Vinod Kumar, Adrian Murphy, Alexander Stukowski, 2020 .

FDM-based Additive Manufacturing (3D Printing): Techniques for Polymer Material Systems

S. A. Grammatikos, Saurav Goel, S. C. Daminabo, 2020 .

The Critical Raw Materials in Cutting Tools for Machining Applications: A Review

Maria Luisa Grilli, Saurav Goel, Vjaceslavs Lapkovskis, 2020, Materials.

Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems

Saurav Goel, Vijay Kumar Thakur, Hamed Yazdani Nezhad, 2020, Materials Today Chemistry.

Benchmarking of several material constitutive models for tribology, wear, and other mechanical deformation simulations of Ti6Al4V.

Alaitz Zabala, Saurav Goel, Iñigo Llavori, 2019, Journal of the mechanical behavior of biomedical materials.

Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle

Wayne Nishio Ayre, Alaitz Zabala, Gaurav Goel, 2021 .

Influence of microstructure on the cutting behaviour of silicon

Alexander Stukowski, Saurav Goel, G. Cross, 2016 .

Nanoindentation of polysilicon and single crystal silicon: Molecular dynamics simulation and experimental validation

Xichun Luo, Anupam Agrawal, Jiwang Yan, 2014 .

Influence of test methodology and probe geometry on nanoscale fatigue failure of diamond-like carbon film

Nadimul Haque Faisal, Rashid Ahmed, Saurav Goel, 2014 .

Molecular dynamics simulation of the elliptical vibration-assisted machining of pure iron

Saeed Zare Chavoshi, Neha Khatri, Saurav Goel, 2018 .

Single Point Diamond Turning of Single Crystal Silicon Carbide: Molecular Dynamic Simulation Study

Saurav Goel, R. Reuben, Jining Sun, 2011 .

Replacing diamond cutting tools with CBN for efficient nanometric cutting of silicon

Robert Lewis Reuben, Xichun Luo, Saurav Goel, 2012 .

Molecular dynamics simulation investigation on the plastic flow behaviour of silicon during nanometric cutting

Xichun Luo, Saeed Zare Chavoshi, Saurav Goel, 2015 .

Advances in the surface defect machining (SDM) of hard steels

Waleed Bin Rashid, Saurav Goel, S. Goel, 2016 .

Simulation Study of Cutting Forces, Stresses and Temperature during Nanometric Cutting of Single Crystal Silicon

Saurav Goel, R. Reuben, Jining Sun, 2011 .

Enabling ultra high precision on hard steels using surface defect machining

Xichun Luo, Waleed Bin Rashid, Saurav Goel, 2014 .

Self-healing of cracks during ductile regime machining of silicon: Insights from molecular dynamics simulation

Alexander Stukowski, Saurav Goel, G. Cross, 2016 .

An experimental investigation for the improvement of attainable surface roughness during hard turning process

Xichun Luo, James Millar Ritchie, Waleed Bin Rashid, 2013 .

A Theoretical Assessment of Surface Defect Machining and Hot Machining of Nanocrystalline Silicon Carbide

Xichun Luo, Vijay K. Jain, Waleed Bin Rashid, 2014 .

Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon

Robert Lewis Reuben, Xichun Luo, Saurav Goel, 2012 .

Twinning anisotropy of tantalum during nanoindentation

Nicholas Dunne, Nadimul Haque Faisal, Saurav Goel, 2015 .

Atomistic aspects of ductile responses of cubic silicon carbide during nanometric cutting

Xichun Luo, Waleed Bin Rashid, Saurav Goel, 2011, Nanoscale research letters.

Prediction of surface roughness during hard turning of AISI 4340 steel

Waleed Bin Rashid, Mark Price, Anupam Agrawal, 2014 .

Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide

Robert Lewis Reuben, Xichun Luo, Saurav Goel, 2012 .

Anisotropy of single-crystal 3C–SiC during nanometric cutting

Robert Lewis Reuben, Xichun Luo, Alexander Stukowski, 2013 .

A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide

Robert Lewis Reuben, Xichun Luo, Saurav Goel, 2012 .

Atomistic investigation on the structure–property relationship during thermal spray nanoparticle impact

Alexander Stukowski, Anupam Agrawal, Nadimul Haque Faisal, 2014 .

Addressing the discrepancy of finding the equilibrium melting point of silicon using molecular dynamics simulations

Saeed Zare Chavoshi, Saurav Goel, Shuozhi Xu, 2017, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

The development of a surface defect machining method for hard turning processes

Xichun Luo, James Millar Ritchie, Waleed Bin Rashid, 2013 .