Eric P. Whitenton

发表

Recent Results from the NIST Pulse-Heated Kolsky Bar

Timothy J. Burns, Steven P. Mates, Richard L. Rhorer, 2007 .

Thermal imaging of metals in a Kolsky-bar apparatus

Timothy J. Burns, Howard W. Yoon, Richard J. Fields, 2003, SPIE Defense + Commercial Sensing.

The NIST Kolsky Bar Data Processing System

Eric P. Whitenton, E. Whitenton, 2005 .

Standards for Optical Imaging Systems in Forensic Laboratories | NIST

Jun-Feng Song, Theodore V. Vorburger, Susan M. Ballou, 2002 .

Initial Measurement Results for 40 NIST RM 8240 Standard Bullets | NIST

Theodore V. Vorburger, Jun-Feng Song, Li Ma, 2004 .

Constitutive Model Data for Machining Simulation Using the NIST Pulse-Heat Kolsky Bar | NIST

Matthew A. Davies, Brian S. Dutterer, Timothy J. Burns, 2003 .

High Speed Grinding of Silicon Nitride With Electroplated Diamond Wheels: I — Wear and Wheel Life

Christopher J. Evans, Stephen Malkin, Eric P. Whitenton, 1999, Manufacturing Science and Engineering.

NIST virtual/physical random-profile roughness calibration standards

Jun-Feng Song, Theodore V. Vorburger, Christopher J. Evans, 1998, Optics & Photonics.

Calibration of Piezoresistive Cantilever Force Sensors Using the NIST Electrostatic Force Balance

Jon R. Pratt, David B. Newell, John A. Kramar, 2003 .

Preliminary investigation of polarization effects during metal cutting

Eric P. Whitenton, 2011, Defense + Commercial Sensing.

NIST Standard Bullets and Casings Project | NIST

Li Ma, Theodore V. Vorburger, Jun-Feng Song, 2007 .

Bullet Signature Measurements at NIST | NIST

Li Ma, Theodore V. Vorburger, Jun-Feng Song, 2003 .

The NIST Kolsky Bar Data Processing System | NIST

Eric P. Whitenton, 2005 .

Establishment of Ballistics Measurement Traceability Using NIST RM 8240 Standard Bullets | NIST

Theodore V. Vorburger, Jun-Feng Song, Eric P. Whitenton, 2002 .

Measurement and Characterization of Dynamics in Machining Chip Segmentation | NIST

Robert W. Ivester, Eric P. Whitenton, Jarred C. Heigel, 2008 .

Assessing the use of an infrared spectrum hyperpixel array imager to measure temperature during additive and subtractive manufacturing

Brandon M. Lane, Shawn P. Moylan, Eric P. Whitenton, 2016, SPIE Commercial + Scientific Sensing and Imaging.

Tensile strength measurements of frangible bullets using the diametral compression test

Steven P. Mates, Richard J. Fields, Stephen W. Banovic, 2008 .

NIST Reference Material (RM) 8240/2350 Project-Standard Bullets and Casings | NIST

Li Ma, Jun-Feng Song, Theodore V. Vorburger, 2003 .

Dynamic Properties for Modeling and Simulation of Machining: An Update of Results from the NIST Pulse-Heated Kolsky Bar | NIST

Timothy J. Burns, Steven P. Mates, Richard L. Rhorer, 2009 .

DYNAMIC PROPERTIES FOR MODELING AND SIMULATION OF MACHINING: EFFECT OF PEARLITE TO AUSTENITE PHASE TRANSITION ON FLOW STRESS IN AISI 1075 STEEL

Timothy J. Burns, Steven P. Mates, Richard L. Rhorer, 2011 .

Infrared thermography for laser-based powder bed fusion additive manufacturing processes

Brandon M. Lane, Shawn P. Moylan, John A. Slotwinski, 2014 .

Fiber orientation angle effects in machining of unidirectional CFRP laminated composites

Brandon M. Lane, Gary Lipczynski, Eric P. Whitenton, 2014 .

Progress toward Système International d’Unités traceable force metrology for nanomechanics

Jon R. Pratt, David B. Newell, John A. Kramar, 2004 .

On Modeling the Peak Temperature on the Tool-Chip Interface during High-Speed Machining of AISI 1045 Steel | NIST

Timothy J. Burns, Steven P. Mates, Richard L. Rhorer, 2010 .

Visualization of Grit Interaction During the Ductile to Brittle Polishing Transition

Richard B. Mindek, Christopher J. Evans, Eric P. Whitenton, 2001 .

Influence of Heating Rate on Flow Stress in High-Speed Machining Processes | NIST

Robert W. Ivester, Matthew A. Davies, Timothy J. Burns, 2004 .

Measuring Chip Segmentation by High-Speed Microvideography and Comparison to Finite-Element Modeling Simulations | NIST

Robert W. Ivester, Eric P. Whitenton, Jarred C. Heigel, 2007 .

Effect on Flow Stress of a Rapid Phase Transition in AISI 1045 Steel

Timothy J. Burns, Steven P. Mates, Richard L. Rhorer, 2011 .

Uncertainty of temperature measurements by infrared thermography for metal cutting applications

Brandon M. Lane, Alkan Donmez, Eric P. Whitenton, 2013 .

Comparison of Measurements and Simulations for Machining of Aluminum | NIST

Robert W. Ivester, L. Deshayes, Eric P. Whitenton, 2005 .

Probe-Force Calibration Experiments Using the NIST Electrostatic Force Balance | NIST

Jon R. Pratt, David B. Newell, John A. Kramar, 2003 .

Stylus-laser surface calibration system

Jun-Feng Song, Theodore V. Vorburger, Thomas B. Renegar, 1996 .