Souren Mitra

发表

Analysis of cutting forces on electrochemical grinding process

Goutam Kumar Bose, R. N. Goswami, T. K. Sarkar, 2010 .

Enhancing die corner accuracy through trim cut in WEDM

Souren Mitra, G. Selvakumar, K. Bravilin Jiju, 2016 .

An artificial neural network approach on parametric optimization of laser micro-machining of die-steel

Arunanshu S. Kuar, Souren Mitra, Srijib Kr. Dhara, 2008 .

Maintenance class-based cost-effective preventive maintenance scheduling of coal-fired power plants

Goutam Kumar Bose, Souren Mitra, Dipankar Bose, 2013 .

Integrating Taguchi Method with Desirability Function Analysis to Optimize the Laser Transmission Welding Process

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2010 .

RAM investigation of coal-fired thermal power plants: A case study

Samiran Chattopadhyay, Goutam Kumar Bose, Souren Mitra, 2012 .

Application of grey-based Taguchi method for simultaneous optimization of multiple quality characteristics in laser transmission welding process of thermoplastics

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2011 .

Availability and cost-centered preventive maintenance scheduling of continuous operating series systems using multi-objective genetic algorithm: A case study

Dipak Kumar Jana, Goutam Kumar Bose, Souren Mitra, 2016 .

Effect of flushing condition on deep hole micro-EDM drilling

Souren Mitra, Man Singh Azad, Vijay Kumar Meena, 2012 .

Experimental investigation on die corner accuracy for wire electrical discharge machining of Monel 400 alloy

Souren Mitra, S. Sarkar, G. Selvakumar, 2012 .

Semiparametric Reliability Model in the Failure Analysis of a Coal-Fired Boiler Used in a Thermal Power Plant—A Case Study

Goutam Kumar Bose, Souren Mitra, Dipankar Bose, 2015 .

A sequentially integrated multi-criteria optimization approach applied to laser transmission weld quality enhancement—a case study

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2013 .

Selection of Process Parameters for Optimizing the Weld Strength in Laser Transmission Welding of Acrylics

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2010 .

EXPERIMENTAL ANALYSIS ON WEDM OF MONEL 400 ALLOYS IN A RANGE OF THICKNESSES

Souren Mitra, Gurusamy Selvakumar, S. Sarkar, 2012 .

An experimental analysis of single pass cutting of aluminium 5083 alloy in different corner angles through WEDM

Souren Mitra, G. Selvakumar, S. Sarkar, 2013 .

Development of an management information system as knowledge base model for machining process characterisation

Bijoy Bhattacharyya, Souren Mitra, S. Chakrabarti, 2007 .

Parametric study of hole circularity in Nd: YAG laser microdrilling of alumina - aluminium (Al2O3 - Al) interpenetrating phase composite

Arunanshu S. Kuar, Souren Mitra, Ranjib Biswas, 2009, Int. J. Manuf. Res..

Electrochemical deburring - A comprehensive review

Souren Mitra, S. P. Kadam, S. Mitra, 2020 .

Modeling and optimization of wire electrical discharge machining of γ-TiAl in trim cutting operation

Bijoy Bhattacharyya, Souren Mitra, S. Sarkar, 2008 .

Artificial neural network modelling of Nd:YAG laser microdrilling on titanium nitride—alumina composite

Arunanshu S. Kuar, Souren Mitra, R. Biswas, 2010 .

Multi-objective optimisation of Nd:YAG laser micro-drilling of zirconia using Taguchi method with desirability function analysis

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2013 .

Multi criteria FMECA for coal-fired thermal power plants using COPRAS-G

Goutam Kumar Bose, Souren Mitra, Dipankar Bose, 2014 .

A novel method of determination of wire lag for enhanced profile accuracy in WEDM

Bijoy Bhattacharyya, Souren Mitra, S. Sarkar, 2011 .

Experimental investigation and multi-objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy

Souren Mitra, G. Selvakumar, S. Sarkar, 2014 .

Electro Discharge Machining of Titanium Nitride-Aluminium Oxide Composite for Optimum Process Criterial Yield

Arunanshu S. Kuar, Souren Mitra, Debajyoti Bhaduri, 2009 .

Grey Relational Analysis Based Optimization of Underwater Nd: YAG Laser Micro-channeling on PMMA

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2014 .

Process optimization in Nd:YAG laser microdrilling of alumina-aluminium interpenetrating phase composite

Arunanshu S. Kuar, Souren Mitra, Ranjib Biswas, 2015 .

A parametric study of pulsed Nd:YAG laser micro-drilling of gamma-titanium aluminide

Arunanshu S. Kuar, Souren Mitra, S. Sarkar, 2010 .

An Integrated Approach to Optimization of WEDM Combining Single-Pass and Multipass Cutting Operation

Bijoy Bhattacharyya, Souren Mitra, S. Sarkar, 2010 .

Experimental investigation on electrochemical grinding (ECG) of alumina-aluminum interpenetrating phase composite

Souren Mitra, S. Sarkar, S. Sarkar, 2009 .

Parametric optimisation of wire electrical discharge machining of γ titanium aluminide alloy through an artificial neural network model

Bijoy Bhattacharyya, Souren Mitra, S. Sarkar, 2006 .

Nd:YAG laser micromachining of alumina–aluminium interpenetrating phase composite using response surface methodology

Souren Mitra, A. S. Kuar, Gayatri Paul, 2006 .

Pareto Optimization of Electro Discharge Machining of Titanium Nitride-Aluminium Oxide Composite Material Using Genetic Algorithm

Souren Mitra, Debajyoti Bhaduri, S. Sarkar, 2011 .

Influence of machining parameters on surface roughness in Nd:YAG laser micro-cutting of alumina-aluminium interpenetrating phase composite

Arunanshu S. Kuar, Souren Mitra, R. Biswas, 2008 .

Characterization of hole circularity in pulsed Nd:YAG laser micro-drilling of TiN–Al2O3 composites

Arunanshu S. Kuar, Souren Mitra, R. Biswas, 2010 .

Finite element simulation of laser transmission welding of dissimilar materials between polyvinylidene fluoride and titanium

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2010 .

Hole characteristics optimization in Nd:YAG laser micro-drilling of zirconium oxide by grey relation analysis

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2012 .

Experimental investigation on laser transmission welding of PMMA to ABS via response surface modeling

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2012 .

Optimization of Nd:YAG Laser Parameters for Microdrilling of Alumina with Multiquality Characteristics via Grey–Taguchi Method

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2012 .