Masatoshi Futakawa

发表

Evaluation of aseismic integrity in HTTR core-bottom structure III. Structural integrity of core support post component

Tatsuo Iyoku, Masahiro Ishihara, Masatoshi Futakawa, 1994 .

Present Status of the Materials & Life Science Experimental Facility of J-PARC

Jun-ichi Suzuki, Yasuhiro Miyake, Takeshi Nakatani, 2015 .

Experiments on graphite block gaps connected with leak flow in bottom-core structure of experimental very high-temperature gas-cooled reactor.

Takakazu Takizuka, Kenji Kikuchi, Konomo Sanokawa, 1984 .

Vibrational characteristics of a coaxial double-pipe

Kenji Kikuchi, Masatoshi Futakawa, 1986 .

Evaluation of aseismic integrity in the HTTR core-bottom structure IV. Structural integrity of connecting elements between graphite components

Tatsuo Iyoku, Masahiro Ishihara, Masatoshi Futakawa, 1995 .

Damping vibration characteristics of coaxial double-pipe structure.

Kenji Kikuchi, Masatoshi Futakawa, 1985 .

Dynamic behavior of the cryogenic hydrogen system using only a heater control

Hideki Tatsumoto, Tomokazu Aso, Masatoshi Futakawa, 2012 .

Performance test of a helium refrigerator for the cryogenic hydrogen system in J-PARC

Hideki Tatsumoto, Tomokazu Aso, Masatoshi Futakawa, 2009 .

Aseismic Structural Design in HTTR Core-Bottom Structure; Aseismic integrity of graphite structure with contacting connect elements.

Tatsuo Iyoku, Masahiro Ishihara, Masatoshi Futakawa, 1995 .

Evaluation of aseismic integrity in the HTTR core-bottom structure V. On the static and dynamic behavior of graphitic HTTR key-keyway structures

Shoji Takada, Tatsuo Iyoku, Masatoshi Futakawa, 1996 .

Evaluation of aseismic integrity in HTTR core-bottom structure II. Vibrational characteristics of keyed graphite components

Shoji Takada, Tatsuo Iyoku, Hiroshi Shirai, 1994 .

Concept of Transmutation Experimental Facility

Toshinobu Sasa, Shigeru Saito, Hideki Takano, 2005 .

Evaluation of aseismic integrity in HTTR core-bottom structure. I: Aseismic test for core-bottom structure

Tatsuo Iyoku, Masahiro Ishihara, Masatoshi Futakawa, 1994 .

R&D on high temperature components

Kazuhiko Kunitomi, Yoshiyuki Inagaki, Yoshiyuki Kaji, 2004 .

Cavitation Erosion Induced by Proton Beam Bombarding Mercury Target for High Power Spallation Neutron Source

Masatoshi Futakawa, Katsuhiro Haga, Takashi Naoe, 2012, CAV 2012.

Design of a compact type cryogenic accumulator to mitigate a pressure fluctuation caused by a sudden KW-order heat load

Takashi Kato, Hideki Tatsumoto, Tomokazu Aso, 2012 .

Mitigation Technologies for Damage Induced by Pressure Waves in High-Power Mercury Spallation Neutron Sources (II)—Bubbling E.ect to Reduce Pressure Wave—

Yujiro Ikeda, Yoichiro Matsumoto, Nobuatsu Tanaka, 2008 .

Design and application of NOBORU—NeutrOn Beam line for Observation and Research Use at J-PARC

Noboru Watanabe, Yujiro Ikeda, Kenji Sakai, 2008 .

Excellent corrosion resistance of 18Cr–20Ni–5Si steel in liquid Pb–Bi

Yuji Kurata, Masatoshi Futakawa, Y. Kurata, 2004 .

Seismic Response of the High-Temperature Engineering Test Reactor Core Bottom Structure

Shusaku Shiozawa, Tatsuo Iyoku, Masatoshi Futakawa, 1992 .

Numerical analysis of mercury cavitation in MW-scale spallation neutron source system

Nobuatsu Tanaka, Masatoshi Futakawa, Mitsuru Suzuki, 2006 .

Development of the Hg target in the J-PARC neutron source

Takashi Wakui, Masatoshi Futakawa, Katsuhiro Haga, 2009 .

Identification of the constitutive equation by the indentation technique using plural indenters with different apex angles

Yuji Tanabe, Takashi Wakui, Ikuo Ioka, 2001 .

Remote handling devices in MLF

Masanori Kaminaga, Fujio Maekawa, Shin-ichiro Meigo, 2009 .

Development of advanced materials for spallation neutron sources and radiation damage simulation based on multi-scale models

Takahiro Ito, Seiichi Watanabe, Kenji Kikuchi, 2012 .

Screening Tests on Materials of Construction for the Thermochemical IS Process

Kaoru Onuki, Hayato Nakajima, Ikuo Ioka, 1997 .

Identification of Material Constants in Constitutive Equation by Indentation Test with Different Indenters.

Yuji Tanabe, Takashi Wakui, Ikuo Ioka, 2002 .

Temperature measurement for in-situ crack monitoring under high-frequency loading

Masatoshi Futakawa, Takashi Naoe, Zhihong Xiong, 2017 .

Impact bending fatigue and impact response behavior of a nuclear-grade graphite beam

Yasushi Muto, Heki Shibata, Masatoshi Futakawa, 1990 .

Mechanical-property evaluation of thin corroded surface layers of ceramic materials by the microindentation technique

Takashi Wakui, Ikuo Ioka, Masatoshi Futakawa, 2000 .

Bending fatigue behavior of nuclear-grade graphite under impact loading

Heki Shibata, Kenji Kikuchi, Masatoshi Futakawa, 1993 .

First neutron production utilizing J-PARC pulsed spallation neutron source JSNS and neutronic performance demonstrated

Noboru Watanabe, Takashi Kato, Yujiro Ikeda, 2010 .

Comparison of the corrosion behavior of austenitic and ferritic/martensitic steels exposed to static liquid Pb-Bi at 450 and 550 °C

Yuji Kurata, Shinzo Saito, Masatoshi Futakawa, 2005 .

1-MW Pulsed Spallation Neutron Source (JSNS) at J-PARC

Fujio Maekawa, Masatoshi Futakawa, M. Futakawa, 2011 .