Youngtai Yoo

发表

Manufacturing and actuation characterization of ionic polymer metal composites with silver as electrodes

Hoon Cheol Park, S. D Pandita, Hyoung Tae Lim, 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Effect of nanoparticulate fillers on the deformation behavior of Nafion-based ionic polymer metal composite

Jang-Woo Lee, Youngtai Yoo, Vinh Khanh Nguyen, 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Design, fabrication and characterization of a flap valve mircopump using an ionic polymer-metal composite actuator

Nam Seo Goo, Thanh Tung Nguyen, Youngtai Yoo, 2007 .

Study on bending behavior of ionic polymer metal composites with various organic solvents and cationic species

Youngtai Yoo, Byung Kuk Nam, Y. Yoo, 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Degradation mechanism of ionic polymer actuators containing ionic liquids as a mixed solvent

Hoon Cheol Park, S. D Pandita, Hyoung Tae Lim, 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

A Novel Polymeric Micropump based on a Multilayered Ionic Polymer-Metal Composite

Thanh Tung Nguyen, Youngtai Yoo, Vinh Khanh Nguyen, 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

Electrolytic stability of various inner solutions in an ionic polymer metal composite

Jang-Woo Lee, Youngtai Yoo, Khanh Nguyen Vinh, 2006 .

Performance Improvement of IPMC (Ionic Polymer Metal Composites) for a Flapping Actuator

Hoon Cheol Park, Soon Gie Lee, S. D Pandita, 2006 .

Characteristics and performance of ionic polymer-metal composite actuators based on Nafion/layered silicate and Nafion/silica nanocomposites

Jang-Woo Lee, Youngtai Yoo, Vinh Khanh Nguyen, 2007 .

Preparation and performance of IPMC actuators with electrospun Nafion®–MWNT composite electrodes

Jang-Woo Lee, Youngtai Yoo, Jang-Woo Lee, 2011 .

A comparative study on dimensional stability of PET and BOPP substrates for fabrication of flexible electric/electronic devices through roll-to-roll printing

Jang-Woo Lee, Youngtai Yoo, Jang-Woo Lee, 2012 .

Actuation behavior of a carbon nanotube/nafion™ IPMC actuator containing an ionic liquid

Jang-Woo Lee, Youngtai Yoo, Hyoung-Tae Lim, 2006 .

Design, fabrication, and experimental characterization of a flap valve IPMC micropump with a flexibly supported diaphragm

Nam Seo Goo, Seungbae Park, Thanh Tung Nguyen, 2008 .

The Structure and Performance of Ionic Polymer‐Metal Composite Actuators Prepared via Electroless Plating Process Using Various Alcohols

Jang-Woo Lee, Youngtai Yoo, Jang-Woo Lee, 2007 .