Mojib Saei

发表

Single-Layer Graphene as a Barrier Layer for Intense UV Laser-Induced Damages for Silver Nanowire Network.

G. Cheng, D. Janes, M. Alam, 2015, ACS nano.

Modeling of dislocation density and strength on rheoforged A356 alloy during multi-directional forging

M. Saei, M. Kazeminezhad, A. Dodangeh, 2014 .

Shock engineering the additive manufactured graphene-metal nanocomposite with high density nanotwins and dislocations for ultra-stable mechanical properties

G. Cheng, D. Bahr, D. Lin, 2018 .

Additive roll printing activated cold welding of 2D crystals and 1D nanowires layers for flexible transparent conductor and planer energy storage

G. Cheng, B. Deng, Qiong Nian, 2016 .

Large Scale Laser Crystallization of Solution-based Alumina-doped Zinc Oxide (AZO) Nanoinks for Highly Transparent Conductive Electrode

G. Cheng, D. Look, Qiong Nian, 2015, Scientific Reports.

Crystalline Nanojoining Silver Nanowire Percolated Networks on Flexible Substrate.

G. Cheng, B. Deng, Qiong Nian, 2015, ACS nano.

Material-Independent Mechanochemical Effect in the Deformation of Highly-Strain-Hardening Metals

S. Chandrasekar, M. Saei, K. Viswanathan, 2018, Physical Review Applied.

Enhanced thermoelectric performance of P-type BixSb2−xTe3 nanowires with pulsed laser assisted electrochemical deposition

G. Cheng, J. Bahk, A. Shakouri, 2016 .

Laser sintered single layer graphene oxide reinforced titanium matrix nanocomposites

M. Zhang, Qiong Nian, Jiale Xu, 2016 .

3D nanostructured inkjet printed graphene via UV-pulsed laser irradiation enables paper-based electronics and electrochemical devices.

Allison A. Cargill, Qiong Nian, Suprem R. Das, 2016, Nanoscale.

Numerical simulation of temperature field distribution for laser sintering graphene reinforced nickel matrix nanocomposites

G. Cheng, Qiong Nian, Shengyu Jin, 2016 .

Super-strengthening and stabilizing with carbon nanotube harnessed high density nanotwins in metals by shock loading

G. Cheng, D. Lin, Shengyu Jin, 2015, Scientific Reports.

Superplastic Formation of Metal Nanostructure Arrays with Ultrafine Gaps

G. Cheng, Y. Xuan, J. Irudayaraj, 2016, Advanced materials.

Cutting of tantalum: Why it is so difficult and what can be done about it

S. Chandrasekar, M. Saei, A. Udupa, 2020 .

Dislocation density and flow stress modeling of nanostructured Al–SiCp composite during accumulative roll bonding

M. Saei, M. Kazeminezhad, J. Kavosi, 2013 .

Dry Etching with Nanoparticles: Formation of High Aspect‐Ratio Pores and Channels Using Magnetic Gold Nanoclusters

G. Cheng, A. Wei, N. Kadasala, 2018, Advanced materials.

On the stability of plastic flow in cutting of metals

S. Chandrasekar, H. Yeung, M. Saei, 2017 .