C. Rubenstein

发表

The mechanics of continuous chip formation in orthogonal cutting

R. Connolly, C. Rubenstein, C. Rubenstein, 1968 .

THE FACTORS INFLUENCING THE SURF ACE FINISH PRODUCED BY GRINDING

C. Rubenstein, 1974 .

Analysis of Oblique Cutting with Controlled Contact Tools

C. Rubenstein, P. K. Venuvinod, W. S. Lau, 1986 .

Analysis of the Life of Controlled Contact Tools via Flank Contact Temperature Estimation

C. Rubenstein, P. K. Venuvinod, W. S. Lau, 1984 .

An experimental investigation of the dynamic cutting of steel

C. Rubenstein, R. J. Grieve, C. Rubenstein, 1973 .

The role of discrete contact at the flank wear land in determining cutting tool temperature in orthogonal cutting

C. Rubenstein, P. K. Venuvinod, W. S. Lau, 1983 .

The influence of flank wear, cutting speed and cutting fluid on the surface and sub-surface workhardening produced in an orthogonal planing operation

C. Rubenstein, W. S. Lau, C. Rubenstein, 1972 .

Tool/chip adhesion and its implications in metal cutting and grinding

C. Rubenstein, 1974 .

The influence of the plan approach angle in orthogonal cutting

C. Rubenstein, W. S. Lau, 1982 .

The elimination of a fault in glass containers produced automatically

C. Rubenstein, 1978 .

The cutting of polymers

C. Rubenstein, R. M. Storie, 1969 .

An Analysis of Tool Life Based on Flank-Face Wear—Part 2: Comparison of Theory With Experimental Observations

C. Rubenstein, C. Rubenstein, 1976 .

On the Formation of a Fluid Film at the Chip Tool Interface in Rotary Machining

C. Rubenstein, P. K. Venuvinod, W. S. Lau, 1983 .

The Principle of Equivalent Obliquity and its Application to Rotary Cutting

C. Rubenstein, P. K. Venuvinod, 1983 .

The torque and thrust arising from contact at the chisel edge and margins in spade drilling of ductile materials

C. Rubenstein, W. S. Lau, M. Wang, 1989 .

Tool Life in Oblique Cutting as a Function of Computed Flank Contact Temperature

C. Rubenstein, P. K. Venuvinod, W. S. Lau, 1990 .

Flow of workpiece material in the vicinity of the cutting edge

C. Rubenstein, P. K. Venuvinod, W. S. Lau, 1985 .

The edge force components in oblique cutting

C. Rubenstein, 1990 .

The relation between tool geometry and the Taylor Tool Life Constant

C. Rubenstein, P. K. Venuvinod, W. S. Lau, 1980 .

The mechanism of orthogonal cutting with controlled contact tools

C. Rubenstein, 1968 .

A Note Concerning the Inadmissibility of Applying the Minimum Work Principle to Metal Cutting

C. Rubenstein, 1983 .

An Analysis of Tool Life Based on Flank-Face Wear—Part 1: Theory

C. Rubenstein, 1976 .

An Analysis of Symmetrical V-Cutting

C. Rubenstein, P. K. Venuvinod, W. S. Lau, 1985 .

The dependence of cutting force on feed and speed in orthogonal cutting with worn tools

C. Rubenstein, J. N. Greenhow, 1969 .

The torque and thrust arising from contact at the lips in spade drilling of ductile metals

C. Rubenstein, Z. J. Pei, W. S. Lau, 1989 .

The torque and thrust force in twist drilling—II. Comparison of experimental observations with deductions from theory

C. Rubenstein, C. Rubenstein, 1991 .

A simple theory of orthogonal cutting

C. Rubenstein, C. Rubenstein, 1965 .

Reciprocating plunge surface grinding with diamond abrasive wheels

C. Rubenstein, C. E. Davis, 1972 .

The application of force equilibrium criteria to orthogonal cutting

C. Rubenstein, 1972 .

The coefficient of friction of metals

C. Rubenstein, C. Rubenstein, 1958 .

A Critical Appraisal of Static Hardness Measurements

C. Rubenstein, C. Rubenstein, 1981 .

ANALYSIS OF CHIP CURVATURE

C. Rubenstein, C. C. Dawe, 1970 .

Review on the factors influencing the friction of fibres, yarns and fabrics

C. Rubenstein, C. Rubenstein, 1959 .

The mechanics of continuous chip formation in oblique cutting in the absence of chip distortion. Part 1—Theory

C. Rubenstein, 1983 .

The mechanics of continuous chip formation in oblique cutting in the absence of chip distortion. Part 2—Comparison of experimental data with deductions from theory

C. Rubenstein, W. S. Lau, 1983 .