Noé Cheung

发表

A comparative analysis of microstructural features, tensile properties and wettability of hypoperitectic and peritectic Sn-Sb solder alloys

José E. Spinelli, Amauri Garcia, Bismarck Luiz Silva, 2018, Microelectron. Reliab..

Numerical simulation for prediction of filling process in a sand mould

Felipe Bertelli, Noé Cheung, Moisés Meza Pariona, 2008 .

Interrelationship of thermal parameters, microstructure and microhardness of directionally solidified Bi-Zn solder alloys

Amauri Garcia, Thiago A. Costa, Noé Cheung, 2017, Microelectron. Reliab..

The use of a heuristic search technique for the optimization of quality of steel billets produced by continuous casting

Amauri Garcia, Noé Cheung, 2001 .

Application of a heuristic search technique for the improvement of spray zones cooling conditions in continuously cast steel billets

J. A. Spim, Amauri Garcia, Noé Cheung, 2006 .

Cellular to dendritic transition during transient solidification of a eutectic Sn-0.7 wt%Cu solder alloy

José E. Spinelli, Noé Cheung, N. Cheung, 2012 .

Experimental analysis of the columnar-to-equiaxed transition in directionally solidified Al–Ni and Al–Sn alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2007 .

Investigation of the chemical composition of nonmetallic inclusions utilizing ternary phase diagrams

Noé Cheung, N. Cheung, Amauri Garcia, 2002 .

Solder/substrate interfacial thermal conductance and wetting angles of Bi–Ag solder alloys

José E. Spinelli, Felipe Bertelli, Bismarck Luiz Silva, 2016, Journal of Materials Science: Materials in Electronics.

Thermal Parameters, Microstructure, and Mechanical Properties of Directionally Solidified Sn-0.7 wt.%Cu Solder Alloys Containing 0 ppm to 1000 ppm Ni

José E. Spinelli, Bismarck Luiz Silva, Noé Cheung, 2012, Journal of Electronic Materials.

Melt characteristics and solidification growth direction with respect to gravity affecting the interfacial heat transfer coefficient of chill castings

Noé Cheung, José Maria do Vale Quaresma, N. Cheung, 2009 .

Interconnection of thermal parameters, microstructure and mechanical properties in directionally solidified Sn–Sb lead-free solder alloys

José E. Spinelli, Marcelino Dias, Thiago A. Costa, 2015 .

An alternative thermal approach to evaluate the wettability of solder alloys

José E. Spinelli, Felipe Bertelli, Bismarck Luiz Silva, 2016 .

The correlation between dendritic microstructure and mechanical properties of directionally solidified hypoeutectic Al-Ni alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2010 .

On array models theoretical predictions versus measurements for the growth of cells and dendrites in the transient solidification of binary alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2011 .

Microstructural and hardness investigation of an aluminum–copper alloy processed by laser surface melting

Noé Cheung, N. Cheung, Amauri Garcia, 2003 .

Heat Transfer Characteristics of Inward, Outward and Upward Solidification of an Al-1.5wt%Fe Alloy in Cylindrical Chill Molds

Felipe Bertelli, Noé Cheung, F. Bertelli, 2012 .

An Effective Inverse Heat Transfer Procedure Based on Evolutionary Algorithms to Determine Cooling Conditions of a Steel Continuous Casting Machine

Felipe Bertelli, Carlos H. Silva-Santos, Noé Cheung, 2015 .

Evaluation of thermophysical properties of Al–Sn–Si alloys based on computational thermodynamics and validation by numerical and experimental simulation of solidification

Felipe Bertelli, Noé Cheung, F. Bertelli, 2016 .

The columnar to equiaxed transition during solidification of Sn–Pb alloys

Noé Cheung, N. Cheung, Amauri Garcia, 2003 .

Application of a Solidification Mathematical Model and a Genetic Algorithm in the Optimization of Strand Thermal Profile Along the Continuous Casting of Steel

J. A. Spim, Carlos Alexandre dos Santos, Noé Cheung, 2005 .

The use of a directional solidification technique to investigate the interrelationship of thermal parameters, microstructure and microhardness of Bi-Ag solder alloys

José E. Spinelli, Bismarck Luiz Silva, Noé Cheung, 2014 .

Interfacial heat transfer coefficients and solidification of an aluminum alloy in a rotary continuous caster

George S. Dulikravich, Noé Cheung, José Maria do Vale Quaresma, 2009 .

Design of mechanical properties of Al-alloys chill castings based on the metal/mold interfacial heat transfer coefficient

José E. Spinelli, Noé Cheung, José Maria do Vale Quaresma, 2012 .

Sn-0.7 wt%Cu-(xNi) alloys: Microstructure-mechanical properties correlations with solder/substrate interfacial heat transfer coefficient

José E. Spinelli, Bismarck Luiz Silva, Noé Cheung, 2015 .

Factors affecting solidification thermal variables along the cross-section of horizontal cylindrical ingots

Carlos Alexandre dos Santos, Noé Cheung, N. Cheung, 2005 .

Cellular growth during transient directional solidification of hypoeutectic Al–Fe alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2009 .