Niccolò Grossi

发表

Chatter stability prediction for high-speed milling through a novel experimental-analytical approach

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2017 .

On the generation of chatter marks in peripheral milling: A spectral interpretation

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2018, International Journal of Machine Tools and Manufacture.

Improved experimental-analytical approach to compute speed-varying tool-tip FRF

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2017 .

Identification of machine tool dynamics under operational conditions

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2016 .

Case Study 1.3: Auto-adaptive Vibrations and Instabilities Suppression in General Milling Operations

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2018 .

Experimental stability lobes identification method based on time-frequency domain analysis

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

Mitigation of chatter instabilities in milling using an active fixture with a novel control strategy

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2017 .

3D Finite Element Modeling of Holder-Tool Assembly for Stability Prediction in Milling☆

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2015 .

Acoustic compensation for chatter detection

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

A novel experimental-numerical approach to modeling machine tool dynamics for chatter stability prediction

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2016 .

Two-points-based receptance coupling method for tool-tip dynamics prediction

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2017 .

Numerical investigation of chatter suppression in milling using active fixtures in open-loop control

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2018 .

Sensors compensation for data acquisition in milling applications

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

Intelligent Fixtures for Active Chatter Control in Milling

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2016 .

Chatter marks generation mechanisms in peripheral milling

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2017 .

Investigating Actuation Strategies in Active Fixtures for Chatter Suppression

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2016 .

Speed-varying Machine Tool Dynamics Identification Through Chatter Detection and Receptance Coupling

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2016 .

Speed-varying cutting force coefficient identification in milling

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

Improved dynamic compensation for accurate cutting force measurements in milling applications

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

A Dedicated Design Strategy for Active Boring Bar

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2019 .

Accurate and fast measurement of specific cutting force coefficients changing with spindle speed

Niccolò Grossi, N. Grossi, 2017 .

Fixture Optimization in Turning Thin-Wall Components

Niccolò Grossi, Antonio Scippa, Lisa Croppi, 2019, Machines.

FEM based cutting velocity selection for thin walled part machining

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2014 .

Spindle speed ramp-up test: A novel experimental approach for chatter stability detection

Ryuta Sato, Gianni Campatelli, Niccolò Grossi, 2015 .

0605 Time domain simulation model for active fixturing in milling

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2015 .

Milled Surface Generation Model for Chip Thickness Detection in Peripheral Milling

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2013 .

Chatter Stability Prediction in Milling Using Speed-varying Cutting Force Coefficients☆

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2014 .

Investigation and Correction of Actual Microphone Response for Chatter Detection in Milling Operations

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2017 .

Correction to: Chatter stability prediction for high-speedmilling through a novel experimental-analytical approach

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2018 .

Improved RCSA technique for efficient tool-tip dynamics prediction

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2016 .

Cutting Forces Analysis in Additive Manufactured AISI H13 Alloy

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2016 .

Finite Element mesh coarsening for effective distortion prediction in Wire Arc Additive Manufacturing

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2017 .

ADAPTIVE TOOLPATH FOR 3-AXIS MILLING OF THIN WALLED PARTS

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2019, MM Science Journal.

Heat accumulation prevention in Wire-Arc-Additive-Manufacturing using air jet impingement

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2018, Manufacturing Letters.

Idle time selection for wire-arc additive manufacturing: A finite element-based technique

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2018 .