I. Baere

发表

Modeling and microstructural analysis of temperature effects in fused silica viewport

J. Degrieck, G. Oost, I. D. Baere, 2011 .

Modelling the nonlinear shear stress-strain response of glass fibre- reinforced composites. Part I: Experimental results

W. Paepegem, J. Degrieck, I. D. Baere, 2006 .

Modelling the nonlinear shear stress–strain response of glass fibre-reinforced composites. Part II: Model development and finite element simulations

W. Paepegem, J. Degrieck, I. D. Baere, 2006 .

Analysis of the Numerical and Geometrical Parameters Influencing the Simulation of Mode I and Mode II Delamination Growth in Unidirectional and Textile Composites

W. Paepegem, I. D. Baere, S. Jacques, 2015, Applied Composite Materials.

Study of the Mode I and Mode II interlaminar behaviour of a carbon fabric reinforced thermoplastic

W. Paepegem, J. Degrieck, I. D. Baere, 2012 .

On the feasibility of a three-point bending setup for the validation of (fatigue) damage models for thin composite laminates

W. Paepegem, J. Degrieck, I. D. Baere, 2008 .

Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres

W. Paepegem, Lode Daelemans, H. Rahier, 2014 .

Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan

Wim Van Paepegem, Hugo Sol, Filip Zastavnik, 2014 .

Modelling the nonlinear shear stress–strain behavior of a carbon fabric reinforced polyphenylene sulphide from rail shear and [(45°,−45°)]4s tensile test

W. Paepegem, J. Degrieck, I. D. Baere, 2009 .

Comparison of the modified three-rail shear test and the [(+45°,−45°)]ns tensile test for pure shear fatigue loading of carbon fabric thermoplastics

W. Paepegem, J. Degrieck, I. D. Baere, 2008 .

Design of a modified three-rail shear test for shear fatigue of composites

W. Paepegem, J. Degrieck, I. D. Baere, 2008 .

Poisson's ratio as a sensitive indicator of (fatigue) damage in fibre-reinforced plastics

W. Paepegem, J. Degrieck, I. D. Baere, 2007 .

Monitoring quasi-static and cyclic fatigue damage in fibre-reinforced plastics by Poisson's ratio evolution

W. Van Paepegem, Joris Degrieck, Ebrahim Lamkanfi, 2010 .

Design of mechanical clamps with extra long wedge grips for static and fatigue testing of composite materials in tension and compression

W. Paepegem, J. Degrieck, I. D. Baere, 2008 .

Assessement of urea based vitrimers as a new matrix material for fibre reinforced polymers

W. Paepegem, F. D. Prez, Johan M. Winne, 2018 .

Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method

W. Paepegem, Lode Daelemans, H. Rahier, 2017 .

Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates

W. Paepegem, Lode Daelemans, H. Rahier, 2016 .

Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veils

W. Paepegem, Lode Daelemans, H. Rahier, 2015 .

On the in-plane mechanical properties of stainless steel fibre reinforced ductile composites

W. Paepegem, J. Degrieck, P. Lava, 2014 .

Local damage in a 5-harness satin weave composite under static tension: Part I - Experimental analysis

I. Verpoest, Jian Xu, W. Paepegem, 2010 .

THE INFLUENCE OF MECHANICAL TEST PARAMETERS ON THE OUTCOME OF THE END NOTCH FLEXURE TEST FOR MODE II FRACTURE TOUGHNESS

W. Paepegem, S. Jacques, I. Baere, 2015 .

On the design of end tabs for quasi‐static and fatigue testing of fibre‐reinforced composites

W. Paepegem, J. Degrieck, I. D. Baere, 2009 .

Mechanoluminescence in BaSi2O2N2:Eu

I. D. Baere, P. Smet, D. Poelman, 2012 .

Impact of lens distortions on strain measurements obtained with 2D digital image correlation

Y. Wang, Dimitri Debruyne, W. Van Paepegem, 2013 .

Impact of lens distrortions on strain measurements obtained with digital image correlation

W. Paepegem, P. Lava, D. Debruyne, 2012 .

Meso-scale modeling in thermoplastic 5-harness satin weave composite

Ignace Verpoest, Wim Van Paepegem, Ives De Baere, 2009 .

On the visco-elasto-plastic response of additively manufactured polyamide-12 (PA-12) through selective laser sintering

W. Paepegem, M. Kersemans, I. D. Baere, 2017 .

The effect of a constant tensile load on the hydrogen diffusivity in dual phase steel by electrochemical permeation experiments

K. Verbeken, I. D. Baere, T. Depover, 2020 .

Interlaminar toughening of resin transfer molded laminates by electrospun polycaprolactone structures: Effect of the interleave morphology

W. Paepegem, Lode Daelemans, H. Rahier, 2016 .

Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers

W. Paepegem, Lode Daelemans, H. Rahier, 2017 .

Calibration of dynamic piezoelectric force transducers using the hopkinson bar technique

Jan Peirs, Wim Van Paepegem, Patricia Verleysen, 2012 .

A comparison between the experimental and theoretical impact pressures acting on a horizontal quasi-rigid cylinder during vertical water entry

J. De Rouck, W. Van Paepegem, Joris Degrieck, 2014 .

Bulk mechanical properties of thermoplastic poly-e-caprolactone

L. Cardon, J. Degrieck, K. Ragaert, 2014 .

Electrical resistance measurement for in situ monitoring of fatigue of carbon fabric composites

W. Paepegem, J. Degrieck, I. D. Baere, 2010 .