Michio Uneda

发表

Trial and Result of Creative Education Project in Engineering Design III at Kanazawa Institute of Technology ; Designing and Manufacturing of Automatic Imprinting Machine

Michio Uneda, Hitoshi Suwabe, Ken-ichi Ishikawa, 2004 .

Studies on Oscillation Controlled Lapping using Small Diameter Lap Tool

Michio Uneda, Hitoshi Suwabe, Ken-ichi Ishikawa, 2006 .

Proposal of Intelligent Polishing System by Artificial Intelligence Using Neural Networks

Michio Uneda, Daichi Yoshisaki, Kazutaka Shibuya, 2020 .

Development of Vibratory OD-Blade Slicing using Mechanical Elliptical Vibration Spindle : Vibration Slicing Principle and Basic Slicing Characteristics(Grinding technology)

Michio Uneda, Hitoshi Suwabe, Ken-ichi Ishikawa, 2005 .

On Science School, Entitled "Manufacture and Measurement of AM Radio", Offered to Junior High School Pupil

Michio Uneda, Masakatsu Matsuishi, Yasutada Sakamoto, 2005 .

A Study on Performance Comparison with Acoustic Holography and MUSIC Methods in Sound Source Identification

Michio Uneda, Ken-ichi Ishikawa, 2004 .

Patterned Sapphire Substrates for III-Nitride Epitaxial Growth

Michio Uneda, Yutaka Kimura, Seong-Woo Kim, 2018, Int. J. Autom. Technol..

Study on Dynamical Investigation of OD-Blade Cutting utilizing Vibration in Vertical Direction

Michio Uneda, Hitoshi Suwabe, Ken-ichi Ishikawa, 1997 .

OS1-3 マイクロ歯車のかみ合いとその精度計測のための微小径ロータリエンコーダの開発(OS1-I・A1 機械要素の強度評価と性能向上・加工)

Yoji Umezaki, Michio Uneda, Osamu Ohnishi, 2011 .

Characteristics of Thermo-Electromotive Force, Electric Current and Electric Resistance in Intermittent Cutting Process by Face Milling

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2011 .

108 Setting Method of Processing Parameters Based on Static Finite Element Method Analysis and Its Evaluation for Leveling Processing

Michio Uneda, Takahiro Nagase, 2012 .

Study on Rolling Processing Evaluation Characteristics Using Sub-DIC Method

Michio Uneda, Ken-ichi Ishikawa, Takahiro Nagase, 2011 .

Proposal of Crack Detection Method for RC Beam by Digital Image Correlation Method

Michio Uneda, Shinichi Miyazato, Yoshihiko Tsukuda, 2012 .

An Innovative Trial for Fundamental Engineering Lab at Kanazawa Institute of Technology : Supporting Experimental Activities through Web

Michio Uneda, Makoto Nishi, Eiichi Sentoku, 2003 .

104 Spatial Location Finding of Sound Source Using Handy Microphone Array System Based on SSP-MUSIC Method

Michio Uneda, Syuhei Kurokawa, Toshiro Doi, 2011 .

4-226 Effect of Cooperative Research Activities on Student's Humanity and Skill Up in Laboratory Education : Educational Activities in Laboratories at Kanazawa Institute of Technology and Kyushu University

Michio Uneda, Ken-ichi Ishikawa, Toshiro Doi, 2011 .

Improvement of Resolution and Angular Measurement Performance by MUSIC Using Fourier Coefficient for Radar Signal Processing

Michio Uneda, Toshihiko Fukue, Hirokazu Hokazono, 2002 .

Study on Sound Source Identification Method using Microphone Directivity Pattern

Michio Uneda, Ken-ichi Ishikawa, 2005 .

Investigation into Chemical Mechanical Polishing Mechanism of Hard-to-Process Materials Using a Commercially Available Single-Sided Polisher

Michio Uneda, Ken-Ichi Ishikawa, Hideo Aida, 2015, Int. J. Autom. Technol..

Studies on Non-Contact Deformation and Stress Measurement Technique of Structures using Sub-pixel Image Processing

Michio Uneda, Ken-ichi Ishikawa, Masakatsu Matsuishi, 2006 .

201 Experimental Studies on Sound Source Localization Accuracy by MUSIC and AH Methods

Michio Uneda, Ken-ichi Ishikawa, Yuusuke Muraoka, 2006 .

チャープバースト波を用いたパルス圧縮方式による超音波センサ計測法に関する研究 : 板厚を対象とした計測の精密度評価に関する実験的検討(機械力学,計測,自動制御)

Michio Uneda, Keisuke Miyake, Ken-ichi Ishikawa, 2009 .

312 Estimation of the progress of tool flank wear by the change of tool-work contact resistance in face milling

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2012 .

215 Study on rolling processing evaluation method using Sub-DIC method

Michio Uneda, Ken-ichi Ishikawa, Akio Segawa, 2010 .

110 画像輝度の変化及びひずみの発生がデジタル画像相関法の測定精度に及ぼす影響(セッション3 画像処理)

Michio Uneda, Ken-ichi Ishikawa, Syun Okuhata, 2009 .

335 Study on Sound Source Identification Method using Microphone Directivity Pattern

Michio Uneda, Ken-ichi Ishikawa, 2005 .

A Basic Study on Vibration OD-Blade Slicing with Atomized Working Fluid.

Michio Uneda, Ken-ichi Ishikawa, Hitoshi Suwabw, 1999 .

Consideration of Course Improvement Activities and Its Effect on Mechanical Designing and Drawing Project

Michio Uneda, Nobuaki Fujiki, 2007 .

STUDIES ON SLICING CHARACTERISTICS OF VIBRATORY OD-BLADE SLICING

Michio Uneda, Hitoshi Suwabe, Hiromasa Tsukada, 2006 .

102 Basic Studies on Sound Source Identification Method using Microphone Directivity Pattern

Michio Uneda, Kohei Arai, Ken-ichi Ishikawa, 2005 .

Designing/Manufacturing of Educational Prototype Hobbing Machine for Exhibitionby Instructing Method to Check Each Other’ s Work and Its Effective Evaluation

Michio Uneda, Ken-ichi Ishikawa, Kazuhiro Gokan, 2011 .

Study on Lapping Characteristics of Oscillation Controlled Method Using Small Lap Tool : Lapping Characteristics Considered with Tool Overhanging and Considerations Based on Slurry Flow Mechanism(Machine Elements, Design and Manufacturing)

Michio Uneda, Ken-ichi Ishikawa, Takashi Narise, 2009 .

203 A STUDY ON BASIC PERFORMANCE COMPARISON WITH ACOUSTIC HOLOGRAPHY AND MUSIC METHODS IN SOUND SOURCE IDENTIFICATION(O.S.4 Measurement and Sensor I)

Michio Uneda, Ken-ichi Ishikawa, 2005 .

Development of Novel Groove Patterns for CMP Pad

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2012 .

Study on Basic Performance Comparison of Acoustic Holography and MUSIC Methods in Sound Source Identification

Michio Uneda, Ken-ichi Ishikawa, 2005 .

106 Basic Studies on Non-Contact Deformation and Stress Measurement of Structures using Image Processing : Computation of effect of image bit numbers on deformation measurement accuracy and basic experiment

Michio Uneda, Masakatsu Matsuishi, Masakazu Shibahara, 2005 .

Spatial Location Finding of Sound Source Using Handy Microphone Array System Based on SSP-MUSIC Method

Michio Uneda, Ken-ichi Ishikawa, Toshiro Doi, 2012 .

Study on Evaluation of ID-Blade Slicing Characteristics Utilizing Elliptical Vibration

Michio Uneda, Hitoshi Suwabe, Ishikawa Ken-ichi, 2000 .

Development of Evaluation Method of Pad Surface Characteristics Based on Contact Image Analysis Using Image Rotation Prism

Kobayashi Takumi, Michio Uneda, Ken-ichi Ishikawa, 2009 .

Trial of Three Dimensional Archiving of Japanese Sword Using Stereo Digital Image Correlation Method

Michio Uneda, Ken-ichi Ishikawa, Norihiro Murakami, 2016 .

Location Finding of Sound Sources by MUSIC Algorithm

Michio Uneda, Ken-ichi Ishikawa, 2003 .

Effects of N-Face Finishing on Geometry of Double-Side Polished GaN Substrate

Michio Uneda, Seong-Woo Kim, Toshiro Doi, 2014, International Journal of Automation Technology.

3328 In-process Tool Flank Wear Detection in Intermittent Cutting Process by Face Milling

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2011 .

Crack Generating Detection Technique of Reinforced Concrete Structure Using Three-Dimensional Measurement Based on Stereo Camera System

Michio Uneda, Ken-ichi Ishikawa, Yoshihiko Tsukuda, 2012 .

Real-time evaluation of tool flank wear by in-process contact resistance measurement in face milling

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2012 .

Study on High Resolvable Location Finding of Near Field Sound Source using MUSIC Algorithm

Michio Uneda, Ken-ichi Ishikawa, 2004 .

Polishing Characteristics and Mechanism of Polishing Glass Substrate Using Suede Pad with Fine Micrometer-Sized Pores

Michio Uneda, Yoshihiro Tawara, Nodoka Yamada, 2022, Int. J. Autom. Technol..

Flexible Fiber Conditioner for Fine Conditioning of Polishing Pad and its Evaluation in Chemical Mechanical Polishing: Verification of SUS-FFC on Soft Urethane Foam Pad and Proposal of PEEK-FFC

Michio Uneda, Takashi Fujita, Naoki Takahashi, 2021, Int. J. Autom. Technol..

Quantitative Evaluation of Slurry Flow Behavior Using Digital Image Processing

Michio Uneda, Ken-ichi Ishikawa, Osamu Ohnishi, 2011 .

A study on combined vibration drilling by ultrasonic and low-frequency vibrations for hard and brittle materials

Michio Uneda, Hitoshi Suwabe, Ken-ichi Ishikawa, 1998 .

Ultraprecision CMP for sapphire, GaN, and SiC for advanced optoelectronics materials

Michio Uneda, Tsutomu Yamazaki, Hideo Aida, 2012 .