Hiroyuki Sasahara

发表

Study on Prediction and Avoidance of Chatter in Milling Process with CAD/CAE and Impulse Sound

Masaomi Tsutsumi, Hiroyuki Sasahara, Yoshihisa Naito, 2006 .

S1303-3-1 High Speed Rotary Cutting of Difficult-to-cut Materials utilizing Multi Tasking Lathe

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiromasa Yamamoto, 2010 .

Generation of Regularly Aligned Dimples on Triangular Pyramidal Patches Using Patch Division Milling

Kai Xu, Hiroyuki Sasahara, 2013, Int. J. Autom. Technol..

High-speed rotary cutting of difficult-to-cut materials on multitasking lathe

Masaomi Tsutsumi, Hiroshi Nakajima, Atsushi Kato, 2008 .

3349 Generation of Regularly Aligned Micro Dimples on Curved Surface by Using Patch Division Milling

Kai Xu, Hiroyuki Sasahara, 2011 .

S1301-1-4 Machining of Difficult-to-cut Materials utilizing Multi tasking machine

Hiroyuki Sasahara, Hiromasa Yamamoto, Toshiyuki Muraki, 2009 .

1604 The Performance of Modified Jatropha Oil as a Sustainable Metalworking Fluid when High Speed Rotary Machining

Hiroyuki Sasahara, Erween Abd Rahim, Masato Goto, 2015 .

Method for generating CNC programs based on block-processing time to improve speed and accuracy of machining curved shapes

Ryuta Sato, Hiroyuki Sasahara, Toshiaki Otsuki, 2018 .

The analytical prediction of residual stress within machined sublayer and its effect on accuracy

Toshiyuki Obikawa, Hiroyuki Sasahara, T. Shirakashi, 1994 .

Basic Nonlinearity of Tool Chatter Vibration(Advanced machining technology)

Toshiyuki Obikawa, Hiroyuki Sasahara, Takahiro Shirakashi, 2005 .

Machining performance of Rotary Cutting of Difficult-to-cut Materials utilizing Multi Tasking Lathe and MQL

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiromasa Yamamoto, 2009 .

Prediction and Control of Machining Accuracy in End Milling for Planar Cam

K. M. Muditha Dassanayake, Hiroyuki Sasahara, Hisayoshi Ito, 2009 .

Generation of Geometric Pattern on Plane Surface by Patch Division Milling

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiroshi Matsuda, 2006 .

Development of a Cooperative System for Wire and arc-based additive manufacturing and Machining

Hiroyuki Sasahara, Takeshi Hamamoto, Nagamatsu Hideaki, 2016 .

Electrochemical Curved Hole Machining with Electrode Posture Control System

Hiroyuki Sasahara, Shohei Nagao, Masahisa Chino, 2007 .

3275 Cutting Point Temperature and Its Effect on Tool Wears on Rotary Cutting under MQL Condition

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiromasa Yamamoto, 2011 .

Identification of Flow Stress Applicable for FEM Simulation of Orthogonal Cutting Process

Soo-Young Kim, Hiroyuki Sasahara, Satoshi Kubota, 2014 .

C028 Evaluation of tool damage in rotary machining process using numerical simulation technique

Soo-Young Kim, Hiroyuki Sasahara, Wataru Takahashi, 2013 .

21118 Developing a low frequency vibration drilling simulator considered about real cutting time

Hiroyuki Sasahara, Kiyoshi Okamura, Akira Himata, 2014 .

FEM Simulation on the Effect of Cutting Parameters in the Driven Rotary Cutting

Hiroyuki Sasahara, Yuji Takagi, Hiromasa Yamamoto, 2014 .

256 Machining characteristics of low-frequency vibration drilling(Advanced machining technology (continued))

Hiroyuki Sasahara, Masaomi Tsutsumi, Kiyoshi Okamura, 2005 .

Method to evaluate speed and accuracy performance of CNC machine tools by speed-error 2-D representation

Ryuta Sato, Hiroyuki Sasahara, Toshiaki Otsuki, 2019 .

Diffusion and Collection of Mist/Oil-Smoke in Near-Dry Machining Environment

Hiroyuki Sasahara, Masanori Hara, Shigeaki Tanaka, 2006 .

C25 Generation of geometric pattern on machined surface by using patch division milling technique : Controlling the aligned state of cutter marks array in the patch area

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiroshi Matsuda, 2008 .

D31 Generation for Geometric Pattern on Curved Surface by using patch Division Milling : Application to triangle pyramid paches

Kai Xu, Hiroyuki Sasahara, 2010 .

Fabrication of Elbow Pipe by Direct Metal Lamination Using Arc Discharge While Maintaining the Molten Pool in a Horizontal Position

Hiroyuki Sasahara, Toshihito Kamioka, Syuhei Ishikawa, 2010, Int. J. Autom. Technol..

Dummy Heat Source Technique for Estimating the Machining Error Caused by Thermal Behavior in Fine Boring

Hiroyuki Sasahara, Y. L. Tang, K. Nishimura, 2007 .

Generation of Uniformly Aligned Dimples on a Curved Surface Using a Curved-Surface, Patch-Division Milling Technique

Kai Xu, Hiroyuki Sasahara, 2016, Int. J. Autom. Technol..

Tool Path Generation for the Formation of a Geometric Surface Pattern on a Curved Surface by Patch Division Milling

Hiroshi Matsuda, Masaomi Tsutsumi, Hiroyuki Sasahara, 2007 .

B13 Analytical prediction of thermal expansion and residual stress on sequential cutting process

Hiroyuki Sasahara, Joonmyeong Choi, Mitsuru Shimomura, 2008 .

Optimization of Cutting Conditions by Combination of Analytical Approach and Database

Masaomi Tsutsumi, Hiroyuki Sasahara, Koji Ito, 2003 .

Development of a tool management system based on analytical approach and database

Hiroyuki Sasahara, Masaomi Tsutsumi, Kouji Itou, 2002 .

Introductory Education on Manufacturing Process on the Subject of a Stirling Engine

Hiroyuki Sasahara, Hironobu Itoh, 2017 .

FEM analysis on three dimensional cutting: analysis on large deformation problem of tool entry

Toshiyuki Obikawa, Hiroyuki Sasahara, Takahiro Shirakashi, 1993 .

Cutting Mechanism on Ultrasonic Vibration Cutting (1st Report)

Hiroyuki Sasahara, Kei Harada, 2004 .

Generation of a regularly aligned surface pattern and control of cutter marks array by patch division milling

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiroshi Matsuda, 2008 .

Oscillating Finish Grinding of CFRP with Woven Metal Wire Tool Utilizing Plunger Pump Pulsation

Hiroyuki Sasahara, Naoya Takeuchi, Kosaku Nomura, 2018, Int. J. Autom. Technol..

Thermal Behavior and Tool Failures on Rotary Cutting of Difficult-to-Cut Materials Utilizing Multi Tasking Lathe

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiromasa Yamamoto, 2010 .

A Method for Evaluating the Speed and Accuracy of CNC Machine Tools

Ryuta Sato, Hiroyuki Sasahara, Toshiaki Otsuki, 2017 .

B29 Thermal Behavior and Chip Formation on Rotary Cutting of Difficult-to-cut Materials Utilizing Multi Tasking Lathe and MQL(Advanced machining technology)

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiromasa Yamamoto, 2009 .

Effect of Rotary Cutting Tool Posture on Machining Performance utilizing Multi-Tasking Lathe

Masaomi Tsutsumi, Hiroshi Nakajima, Atsushi Kato, 2008 .

Investigation of thermal behavior on cylinder liner during its boring process

Hiroyuki Sasahara, Yulong Tang, H. Sasahara, 2007 .

412 Rotary Cutting of Difficult-to-Cut Materials by Multi Tasking Lathe

Hiroshi Nakajima, Atsushi Kato, Hiroyuki Sasahara, 2006 .

Analytical Prediction of Temperature Distribution in Cylinder Liner during Various Boring Operations

Hiroyuki Sasahara, Yulong Tang, H. Sasahara, 2008 .

Effect of low frequency vibration applied to feed direction on turning process

Hiroyuki Sasahara, Kenji Noguchi, Masahiro Muramatsu, 2016, 2016 International Symposium on Flexible Automation (ISFA).

Application of computational machining method to discontinuous chip formation

Toshiyuki Obikawa, Eiji Usui, Hiroyuki Sasahara, 1997 .

Tool Path Generation for the Formation of a Geometric Surface Pattern on a Curved Surface by Patch Division Milling

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiroshi Matsuda, 2007 .

Analytical Prediction of Sequential Cutting Process

Hiroyuki Sasahara, Yulong Tang, Mitsuru Shimomura, 2007 .

Finite Element Approach to Chip Breaker.

Toshiyuki Obikawa, Eiji Usui, Hiroyuki Sasahara, 1992 .

Study on Manufacturing Process of Trimming Edge of Stamping Die Tool (Direct Metal Lamination on NC Machine and the Development of Weld Metal)

Hiroyuki Sasahara, keizou tanaka, 2012 .

An Integral Method to Determine Workpiece Flow Stress and Friction Characteristics in Metal Cutting

Soo-Young Kim, Hiroyuki Sasahara, Satoshi Kubota, 2015, Int. J. Autom. Technol..

Prediction and Avoidance of Chatter in Milling of Thin-Walled Structure

Hiroyuki Sasahara, Yoshihisa Naito, 2009 .

Development of Cutting Process Simulater using FEM

Hiroyuki Sasahara, Takaya Honda, H. Sasahara, 2005 .

A retrieval system for Japanese language data for use with non-Japanese browsers

Hiroyuki Sasahara, Eric Long, Shoichi Yokoyama, 2000 .

Residual Stress and Deformation After Finishing of a Shell Structure Fabricated by Direct Metal Lamination Using Arc Discharge

Hiroyuki Sasahara, Takeyuki Abe, 2012, Int. J. Autom. Technol..

Effect of Rotary Cutting Tool Posture on Multi-Tasking Lathe

Hiroyuki Sasahara, Atsushi Kato, Hiroshi Nakajima, 2007 .