Wenfeng Ding

发表

Review on Grinding Technology of Nickel-based Superalloys Used for Aero-engine

Wenfeng Ding, W. Ding, 2019, Journal of Mechanical Engineering.

Response to the comment on “International Journal of Machine Tools and Manufacture 122 (2017) 66–80”

Tianyu Yu, Wenfeng Ding, Chenwei Dai, 2017 .

Investigation on heating temperature characteristics during rotating induction brazing of monolayer CBN grinding wheels: Numerical simulation and experimental verification

Wei Xu, Wenfeng Ding, Yejun Zhu, 2017 .

An investigation on the chip formation and forces in the grinding of Inconel718 alloy using the single-grain method

Jianbo Dai, Liangchi Zhang, Wenfeng Ding, 2014 .

Optimization for internal traverse grinding of valves based on wheel deflection

Hao Su, Wenfeng Ding, Yucan Fu, 2017 .

Microstructure and tribological property of self-lubrication CBN abrasive composites containing molybdenum disulfide

Biao Zhao, Wenfeng Ding, Yucan Fu, 2019 .

Predicting the grinding force of titanium matrix composites using the genetic algorithm optimizing back-propagation neural network model

Zheng Li, Huan Zhou, Wenfeng Ding, 2018, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

Grinding behavior and surface appearance of (TiCp + TiBw)/Ti-6Al-4V titanium matrix composites

Biao Zhao, Wenfeng Ding, Yucan Fu, 2014 .

Grindability evaluation and tool wear during grinding of Ti2AlNb intermetallics

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2018 .

Material removal mechanism of PTMCs in high-speed grinding when considering consecutive action of two abrasive grains

Wenfeng Ding, Huan Zhou, Chaojie Liu, 2018, The International Journal of Advanced Manufacturing Technology.

Grinding force and energy modeling of textured monolayer CBN wheels considering undeformed chip thickness nonuniformity

Zhen Yin, Wenfeng Ding, Yejun Zhu, 2019, International Journal of Mechanical Sciences.

Fabrication and performance of porous metal-bonded CBN grinding wheels using alumina bubble particles as pore-forming agents

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2013 .

Fractal analysis of wear topography of brazed polycrystalline cBN abrasive grains during grinding nickel super alloy

Qing Miao, Wenfeng Ding, Yucan Fu, 2013 .

Investigation on stress distribution and wear behavior of brazed polycrystalline cubic boron nitride superabrasive grains: Numerical simulation and experimental study

Tianyu Yu, Wenfeng Ding, Yucan Fu, 2017 .

Wear evolution and stress distribution of single CBN superabrasive grain in high-speed grinding

Tianyu Yu, Wenfeng Ding, Yucan Fu, 2018, Precision Engineering.

Influence of grain wear on material removal behavior during grinding nickel-based superalloy with a single diamond grain

Tianyu Yu, Wenfeng Ding, Yucan Fu, 2017 .

Simulation research on the grinding forces and stresses distribution in single-grain surface grinding of Ti-6Al-4V alloy when considering the actual cutting-depth variation

Qing Miao, Wenfeng Ding, Jiuhua Xu, 2017 .

Comparison on grindability and surface integrity in creep feed grinding of GH4169, K403, DZ408 and DD6 nickel-based superalloys

Qing Miao, Wenfeng Ding, Changyong Yang, 2020 .

Grinding temperature during high-efficiency grinding Inconel 718 using porous CBN wheel with multilayer defined grain distribution

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2015 .

BP neural network based flexural strength prediction of open-porous Cu-Sn-Ti composites

Biao Zhao, Tianyu Yu, Wenfeng Ding, 2018, Progress in Natural Science: Materials International.

Wear behavior and mechanism of single-layer brazed CBN abrasive wheels during creep-feed grinding cast nickel-based superalloy

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2010 .

Comparative study on cutting behavior of vitrified cubic boron nitride wheel and electroplated cubic boron nitride wheel in high-speed grinding of (TiCp + TiBw)/Ti-6Al-4V composites

Biao Zhao, Wenfeng Ding, Jiuhua Xu, 2016 .

Grinding performance and surface integrity of particulate-reinforced titanium matrix composites in creep-feed grinding

Wenfeng Ding, W. Ding, Chaojie Liu, 2018 .

Tool wear in milling Ti40 burn-resistant titanium alloy using pneumatic mist jet impinging cooling

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2016 .

Review on monolayer CBN superabrasive wheels for grinding metallic materials

Barbara Linke, Wenfeng Ding, Yucan Fu, 2017 .

The influence of speed on material removal mechanism in high speed grinding with single grit

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2015 .

Grinding temperature and power consumption in high speed grinding of Inconel 718 nickel-based superalloy with a vitrified CBN wheel

Wenfeng Ding, Jiuhua Xu, Yejun Zhu, 2017 .

Grinding of Ti2AlNb intermetallics using silicon carbide and alumina abrasive wheels: Tool surface topology effect on grinding force and ground surface quality

Tianyu Yu, Wenfeng Ding, Jiuhua Xu, 2018, Precision Engineering.

Grinding performance of textured monolayer CBN wheels: Undeformed chip thickness nonuniformity modeling and ground surface topography prediction

Tianyu Yu, Wenfeng Ding, Yucan Fu, 2017 .

Comparative Investigation on Brazing Behavior, Compressive Strength, and Wear Properties of Multicrystalline CBN Abrasive Grains

Wenfeng Ding, Jiuhua Xu, Yejun Zhu, 2014 .

Tool wear behavior of vitrified microcrystalline alumina wheels in creep feed profile grinding of turbine blade root of single crystal nickel-based superalloy

Qing Miao, Wenfeng Ding, Jiuhua Xu, 2020 .