Michael Wensing

发表

Fine and ultrafine particles emitted from laser printers as indoor air contaminants in German offices, Tao Tang, Julia Hurraß, Richard Gminski, Volker Mersch-Sundermann (2011) Environ Sci Pollut Res; DOI: 10.1007/s11356-011-0647-5

Michael Wensing, 2012, Environmental Science and Pollution Research.

Model-based virtual engine calibration with the help of phenomenological methods for spark-ignited engines

Michael Wensing, Jens Neumann, Christian Hasse, 2017 .

Impulse Charging for Diesel Engines: Improved Performance Characteristic and Inside-Engine Measures to Meet Future Emission Legislation

Michael Wensing, Peter Heuser, Peter Heuser, 2004 .

CorrigendumCorrigendum to “Ultra-fine particles release from hardcopy devices: Sources, real room measurements and efficiency of filter accessories” [Science of the Total Environment 407 (2008) 418–427]

Michael Wensing, Tobias Schripp, Erik Uhde, 2010 .

Particle Measurement of Hardcopy Devices

Michael Wensing, M. Bednarek, Erik Uhde, 2006 .

Semi-Empirical Model to Calculate Spray Length Considering Evaporation Effect

Michael Wensing, Lars Zigan, Paul Gordan, 2010 .

Environmental Test Chambers

Michael Wensing, M. Wensing, 2007 .

FL1-4 Effects of fuel composition on spray ignition under engine relevant conditions(FL: Fuels,General Session Papers)

Michael Wensing, Thomas Vogel, Thomas Vogel, 2012 .

Mixture Formation in a CNG-DI Engine in Stratified Operation

Michael Wensing, Wolfgang Friedrich, Roman Grzeszik, 2015 .

Structure of evaporating single- and multicomponent fuel sprays for 2nd generation gasoline direct injection

Michael Wensing, Lars Zigan, Alfred Leipertz, 2011 .

Chamber studies on nonvented decorative fireplaces using liquid or gelled ethanol fuel.

Michael Wensing, Tobias Schripp, Tunga Salthammer, 2014, Environmental science & technology.

Characterization of Ultra-fine Particle Emissions from a Laser Printer

Michael Wensing, Erik Uhde, M. Wensing, 2006 .

Modern optical diagnostics in engine research

Michael Wensing, Alfred Leipertz, A. Leipertz, 2007 .

Evaluation of ultrafine particle emissions from laser printers using emission test chambers.

Michael Wensing, Lidia Morawska, Tobias Schripp, 2008, Environmental science & technology.

Spray formation of high-pressure swirl gasoline injectors investigated by two-dimensional Mie and LIEF techniques

Michael Wensing, Alfred Leipertz, Stefan Arndt, 1999 .

Fuel property and fuel temperature effects on internal nozzle flow, atomization and cyclic spray fluctuations of a direct injection spark ignition–injector

Michael Wensing, Lars Zigan, Alfred Leipertz, 2013 .

Influence of fuel mixture on spray formation in die sel processes

Michael Wensing, Alfred Leipertz, A. Leipertz, 2010 .

Aerosols generated by hardcopy devices and other electrical appliances.

Michael Wensing, Tobias Schripp, Erik Uhde, 2012, Environmental pollution.

Comparison of ultrafine particle release from hardcopy devices in emission test chambers and office rooms

Michael Wensing, Lidia Morawska, Tobias Schripp, 2009 .

Reynolds number effects on atomization and cyclic spray fluctuations under gasoline direct injection conditions

Michael Wensing, Lars Zigan, Alfred Leipertz, 2012 .

A Quasi-dimensional Model of the Ignition Delay for Combustion Modeling in Spark-Ignition Engines

Michael Wensing, Jens Neumann, Christian Hasse, 2015 .

Effect of Fuel Properties on Spray Breakup and Evaporation Studied for a Multihole Direct Injection Spark Ignition Injector

Michael Wensing, Lars Zigan, Alfred Leipertz, 2010 .

Comparison of Shadowgraph Imaging, Laser-Doppler Anemometry and X-Ray Imaging for the Analysis of Near Nozzle Velocities of GDI Fuel Injectors

Michael Wensing, Zhilong Li, Jin Wang, 2017 .

Transition of diesel spray to a supercritical state under engine conditions

Michael Wensing, M. Wensing, Thomas Vogel, 2016 .

Emission of VOCs and SVOCs from Electronic Devices and Office Equipment

Michael Wensing, Tobias Schripp, 2009 .

An Impulse Charging System for SI and Diesel Engines

Michael Wensing, Peter Heuser, Peter Kreuter, 2002 .

An investigation into the characteristics and formation mechanisms of particles originating from the operation of laser printers.

Michael Wensing, Lidia Morawska, Rohan Jayaratne, 2009, Environmental science & technology.

Fuel Distribution and Mixture Formation Inside a Direct Injection SI Engine Investigated by 2D Mie and LIEF Techniques

Michael Wensing, Alfred Leipertz, Wolfgang Ipp, 1999 .

Characterization of particulate and gaseous pollutants emitted during operation of a desktop 3D printer.

Michael Wensing, Erik Uhde, Tunga Salthammer, 2019, Environment international.

Derivation and validation of a heat transfer model in a hydrogen combustion engine

Michael Wensing, Jens Neumann, Hermann Rottengruber, 2016 .

Effect of fuel properties on primary breakup and spray formation studied at a gasoline 3-hole nozzle

Michael Wensing, Lars Zigan, Alfred Leipertz, 2010 .

Impact of operating wood-burning fireplace ovens on indoor air quality.

Michael Wensing, Tobias Schripp, Tunga Salthammer, 2014, Chemosphere.

Ultra-fine particles release from hardcopy devices: sources, real-room measurements and efficiency of filter accessories.

Michael Wensing, Tobias Schripp, Erik Uhde, 2008, The Science of the total environment.

Investigation of Fuel Atomization and Evaporation of a DISI Injector Spray Under Homogeneous Charge Conditions

Michael Wensing, M. Wensing, Tobias Knorsch, 2013 .

A novel heat flux burner system to determine the laminar flame velocity of liquid fuels

Michael Wensing, Alfred Leipertz, A. Leipertz, 2013 .

The effect of ethanol blending on mixture formation, combustion and soot emission studied in an optical DISI engine

Stefan Will, Michael Wensing, Lars Zigan, 2015 .

Calculation and Measurements of Self-Ignition Nuclei in Diesel Combustion

Michael Wensing, Jurij Avsec, Alfred Leipertz, 2010 .