Hongrui Cao

发表

An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack

Yanyang Zi, Zhengjia He, Wan Zhiguo, 2014 .

Fast implementation of synchrosqueezing transform based on downsampling for large-scale vibration signal analysis

Hongrui Cao, Dong He, Hongrui Cao, 2020, 2003.07065.

The principle of second generation wavelet for milling cutter breakage detection

Yanyang Zi, Zhengjia He, Zhen Li, 2008 .

Root Cause Identification of Machining Error Based on Statistical Process Control and Fault Diagnosis of Machine Tools

Hongrui Cao, Denghui Li, Yiting Yue, 2017 .

DESIGN OPTIMIZATION OF MOTORIZED SPINDLE BEARING LOCATIONS BASED ON DYNAMIC MODEL AND GENETIC ALGORITHM

Xuefeng Chen, Hongrui Cao, Denghui Li, 2017 .

Dynamic modeling of machine tool spindle bearing system and model based diagnosis of bearing fault caused by collision

Xuefeng Chen, Hongrui Cao, Linkai Niu, 2018 .

End milling tool breakage detection using lifting scheme and Mahalanobis distance

Feng Ding, Yanyang Zi, Zhengjia He, 2008 .

Study on nonlinear stiffness of rolling ball bearing under varied operating conditions

Hongrui Cao, Yongsheng Zhu, Yamin Li, 2013, 2013 IEEE International Symposium on Assembly and Manufacturing (ISAM).

Study of frequency-shifted and re-scaling stochastic resonance and its application to fault diagnosis

Yanyang Zi, Zhengjia He, Xuefeng Chen, 2009 .

Reliability estimation for cutting tools based on logistic regression model using vibration signals

Gaigai Cai, Bing Li, Zhengjia He, 2011 .

Discrete Time-Delay Optimal Control Method for Experimental Active Chatter Suppression and Its Closed-Loop Stability Analysis

Robert X. Gao, Xuefeng Chen, Hongrui Cao, 2019, Journal of Manufacturing Science and Engineering.

Operational Reliability Assessment of Compressor Gearboxes with Normalized Lifting Wavelet Entropy from Condition Monitoring Information

Xiaoli Zhang, Bing Li, Xuefeng Chen, 2015, Entropy.

Mechanical model development of rolling bearing-rotor systems: A review

Hongrui Cao, Xuefeng Chen, Linkai Niu, 2018 .

An investigation on the occurrence of stable cage whirl motions in ball bearings based on dynamic simulations

Zhengjia He, Hongrui Cao, Linkai Niu, 2016 .

An effective approach to rolling bearing diagnosis based on Adaptive Redundant Second-Generation Wavelet

Feng Ding, Yanyang Zi, Zhengjia He, 2008 .

Finite Element Model Updating of Machine-Tool Spindle Systems

Bing Li, Zhengjia He, Hongrui Cao, 2013 .

A Comparative Study of Information-Based Source Number Estimation Methods and Experimental Validations on Mechanical Systems

Wei Cheng, Zhengjia He, Hongrui Cao, 2014, Sensors.

A general dynamic model coupled with EFEM and DBM of rolling bearing-rotor system

Yamin Li, Hongrui Cao, Kai Tang, 2019 .

Application of support vector machine for equipment reliability forecasting

Feng Ding, Yanyang Zi, Zhengjia He, 2008, 2008 6th IEEE International Conference on Industrial Informatics.

The Condition Monitoring and Performance Evaluating of Digital Manufacturing Process

Zhengjia He, Bing Li, Xuefeng Chen, 2008, ICIRA.

A Non-Probabilistic Metric Derived From Condition Information for Operational Reliability Assessment of Aero-Engines

Ming Jian Zuo, Zhengjia He, Xuefeng Chen, 2015, IEEE Transactions on Reliability.

Dynamic Modeling and Model Updating of Coupled Systems between Machine Tool and Its Spindle

Hongrui Cao, 2012 .

Multi-fault classification based on wavelet SVM with PSO algorithm to analyze vibration signals from rolling element bearings

Zhiwen Liu, Zhengjia He, Xuefeng Chen, 2013, Neurocomputing.

Dynamic modeling of spindle bearing system and vibration response investigation

Xuefeng Chen, Hongrui Cao, Songtao Xi, 2019, Mechanical Systems and Signal Processing.

Dynamic modeling and vibration response simulations of angular contact ball bearings with ball defects considering the three-dimensional motion of balls

Hongrui Cao, Linkai Niu, Xiaoyan Xiong, 2017 .

A data-driven threshold for wavelet sliding window denoising in mechanical fault detection

Yanyang Zi, Zhengjia He, Hongrui Cao, 2014 .

Zoom synchrosqueezing transform and iterative demodulation: Methods with application

Shibin Wang, Hongrui Cao, Xuefeng Chen, 2016 .

Dynamic Reliability Analysis of Large Span Isolated Structures Based on Extreme Distribution Theory

Hongrui Cao, Z. Y. Gu, Q. R. Shen, 2019 .

Model-based error motion prediction and fit clearance optimization for machine tool spindles

Yamin Li, Hongrui Cao, Xuefeng Chen, 2019, Mechanical Systems and Signal Processing.

Collaborative Double Sparse Period-Group Lasso for Bearing Fault Diagnosis

Hongrui Cao, Xuefeng Chen, Lei Wang, 2021, IEEE Transactions on Instrumentation and Measurement.

Chatter detection in high-speed milling processes based on ON-LSTM and PBT

Hongrui Cao, Yuke Wang, Yufei Ding, 2020, The International Journal of Advanced Manufacturing Technology.

Chatter identification in end milling process using wavelet packets and Hilbert–Huang transform

Yaguo Lei, Zhengjia He, Hongrui Cao, 2013 .

Periodic Impulsive Fault Feature Extraction of Rotating Machinery Using Dual-Tree Rational Dilation Complex Wavelet Transform

Chunlin Zhang, Bing Li, Binqiang Chen, 2014 .

Chatter stability of milling with speed-varying dynamics of spindles

Zhengjia He, Bing Li, Hongrui Cao, 2012 .

Method for Vibration Response Simulation and Sensor Placement Optimization of a Machine Tool Spindle System with a Bearing Defect

Zhengjia He, Hongrui Cao, Linkai Niu, 2012, Sensors.

The concept and progress of intelligent spindles: A review

Xuefeng Chen, Hongrui Cao, Xingwu Zhang, 2017 .

An improvement of time-reassigned synchrosqueezing transform algorithm and its application in mechanical fault diagnosis

Hongrui Cao, Xuefeng Chen, Wang Xiangsheng, 2020 .

An accelerated wear model for magnetic heads with respect to sensory data

Yanyang Zi, Yu Wang, Kwok-Leung Tsui, 2014, 2014 Prognostics and System Health Management Conference (PHM-2014 Hunan).

A spring dashpot model for dynamic analysis of beam-like structure with clearance

Wei Jin, Zhengjia He, Hongrui Cao, 2013 .

Model Updating of Spindle Systems Based on the Identification of Joint Dynamics

Wei Cheng, Hongrui Cao, Songtao Xi, 2015 .

Wheel-bearing fault diagnosis of trains using empirical wavelet transform

Zhengjia He, Fei Fan, Hongrui Cao, 2016 .

Subband averaging kurtogram with dual-tree complex wavelet packet transform for rotating machinery fault diagnosis

Xin Zhang, Hongrui Cao, Lei Wang, 2020 .

Condition assessment for automatic tool changer based on sparsity-enabled signal decomposition method

Gaigai Cai, Wei Xin, Xuefeng Chen, 2015 .

RUL Prediction For Turbine Disc Based On High-Order Particle Filtering

Hongrui Cao, Yang Fu, 2020, 2020 International Conference on Sensing, Measurement & Data Analytics in the era of Artificial Intelligence (ICSMD).

Downsampling-based synchrosqueezing transform and its applications on large-scale vibration data

Hongrui Cao, Dong He, Hongrui Cao, 2021 .

Adaptive Broad Learning System for High-Efficiency Fault Diagnosis of Rotating Machinery

Hongrui Cao, Xuefeng Chen, Yang Fu, 2021, IEEE Transactions on Instrumentation and Measurement.

The multivariable finite elements based on B-spline wavelet on the interval for 1 D structural mechanics

Zhengjia He, Hongrui Cao, Xingwu Zhang, 2012 .

Active chatter control in high speed milling processes based on H∞ almost disturbance decoupling problem

Hongrui Cao, Xingwu Zhang, Fei Shi, 2018 .

A demodulating approach based on local mean decomposition and its applications in mechanical fault diagnosis

Gaigai Cai, Yanyang Zi, Zhengjia He, 2011 .

Weak fault signature extraction of rotating machinery using flexible analytic wavelet transform

Bing Li, Chunlin Zhang, Binqiang Chen, 2015 .

A New Dynamic Model of Ball-Bearing Rotor Systems Based on Rigid Body Element

Yamin Li, Hongrui Cao, Hongrui Cao, 2016 .

Dynamic Force Identification in Peripheral Milling Based on CGLS Using Filtered Acceleration Signals and Averaged Transfer Functions

Hongrui Cao, Baijie Qiao, Xingwu Zhang, 2019, Journal of Manufacturing Science and Engineering.

Vibration and stability analysis of rotor-bearing-pedestal system due to clearance fit

Hongrui Cao, Xuefeng Chen, Yamin Li, 2019, Mechanical Systems and Signal Processing.

Time-reassigned synchrosqueezing transform: The algorithm and its applications in mechanical signal processing

Shibin Wang, Hongrui Cao, Xuefeng Chen, 2019, Mechanical Systems and Signal Processing.

Milling chatter control based on asymmetric stiffness

Hongrui Cao, Xingwu Zhang, Xuefeng Chen, 2019 .

Multi harmonic spindle speed variation for milling chatter suppression and parameters optimization

Ruqiang Yan, Hongrui Cao, Xingwu Zhang, 2019, Precision Engineering.

Multi harmonic and random stiffness excitation for milling chatter suppression

Ruqiang Yan, Hongrui Cao, Xuefeng Chen, 2019, Mechanical Systems and Signal Processing.

Milling stability prediction and adaptive chatter suppression considering helix angle and bending

Hongrui Cao, Jiawei Xiang, Xingwu Zhang, 2018 .