C. Liu

发表

Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase

C. Liu, Sheng Guo, C. Liu, 2011 .

Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases

Bin Liu, Yong Liu, C. T. Liu, 2016 .

High-entropy alloy: challenges and prospects

Jian Lu, C. T. Liu, Jian Lu, 2016 .

More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase

C. Liu, Sheng Guo, Chun Ng, 2013 .

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys

C. Liu, Sheng Guo, Chun Ng, 2011 .

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

J. J. Kai, C. T. Liu, Z. B. Jiao, 2018, Science.

A method for evaluating stress intensity distribution for cracks in rocket motor bondlines

C. Smith, C. Liu, E. F. Finlayson, 1997 .

Structural amorphous steels.

C. Liu, Z. Lu, J. Thompson, 2004, Physical review letters.

Controlled normal/shear loading and shear fracture in bulk metallic glasses

H. Bei, E. George, Chun-Hway Hsueh, 2009 .

Identify the best glass forming ability criterion

C. Liu, Z. Lu, Sheng Guo, 2010 .

Fatigue behavior of bulk-metallic glasses

C. R. Brooks, B. Yang, P. Liaw, 2004 .

Cooling-rate induced softening in a Zr50Cu50 bulk metallic glass

Y. Liu, H. Bei, E. George, 2007 .

Binary eutectic clusters and glass formation in ideal glass-forming liquids

Jun Shen, Jingxue Sun, C. T. Liu, 2006 .

A new glass-forming ability criterion for bulk metallic glasses

C. Liu, Zhaoping Lu, C. Liu, 2002 .

Effects of welding and post-weld heat treatments on nanoscale precipitation and mechanical properties of an ultra-high strength steel hardened by NiAl and Cu nanoparticles

W. Guo, C. Liu, Z. Jiao, 2016 .

Direct separation of arsenic and antimony oxides by high-temperature filtration with porous FeAl intermetallic.

C. Liu, N. Lin, Yuehui He, 2017, Journal of hazardous materials.

Microstructure control and tensile properties of three-phase alloys based on the E21 Co3AlC and B2 CoAl

C. Liu, Y. Kimura, Y. Mishima, 2001 .

Processing, properties, and applications of nickel and iron aluminides

C. Liu, S. Deevi, V. Sikka, 1997 .

Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy

E. Huang, H. Chang, Y. Lu, 2020, Nature Communications.

Multicomponent Ni-rich high-entropy alloy toughened with irregular-shaped precipitates and serrated grain boundaries

Jian Lu, Q. Zhai, J. Luan, 2021 .

A novel equiaxed eutectic high-entropy alloy with excellent mechanical properties at elevated temperatures

B. Liu, C. Liu, Yong Liu, 2020 .

Unveiling the Electronic Origin for Pressure-Induced Phase Transitions in High-Entropy Alloys

C. Liu, Honghui Wu, Xun-li Wang, 2020, Matter.

Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy

C. Liu, J. Luan, Jie Wei, 2019, Scripta Materialia.

Strengthening mechanism in a high-strength carbon-containing powder metallurgical high entropy alloy

Y. Liu, C. Liu, Bin Liu, 2018, Intermetallics.

Composition evolution of gamma prime nanoparticles in the Ti-doped CoFeCrNi high entropy alloy

Bin Han, Feng He, Koji Inoue, 2018 .

Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al0.1CoCrFeNi

A. Hirata, T. Nieh, P. Liaw, 2018 .

Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy

Ji-Jung Kai, Alice Hu, C. T. Liu, 2017 .

Precipitation hardening in CoCrFeNi-based high entropy alloys

C. Liu, W. Liu, Wei-hong Liu, 2017 .

Solid solution island of the Co-Cr-Fe-Ni high entropy alloy system

C. Liu, Jincheng Wang, Junjie Li, 2017 .

Kinetic ways of tailoring phases in high entropy alloys

C. Liu, Jincheng Wang, Junjie Li, 2016, Scientific Reports.

Design of D 022 superlattice with superior strengthening effect in high entropy alloys

C. Liu, D. Wei, B. Han, 2019 .

The stability of hydrogen evolution activity and corrosion behavior of porous Ni3Al–Mo electrode in alkaline solution during long-term electrolysis

N. Xu, J. Zou, C. Liu, 2014 .

The development of alumina-forming austenitic stainless steels for high-temperature structural use

H. Bei, C. Liu, Zhaoping Lu, 2008 .

Effects of boron additions and solutionizing treatments on microstructures and ductility of forged Ti–6Al–4V alloys

C. Liu, Z. Jiao, J. Luan, 2015 .

Improved ductility and oxidation resistance of cast Ti–6Al–4V alloys by microalloying

C. Liu, Z. Jiao, J. Luan, 2014 .

Phase separation of metastable CoCrFeNi high entropy alloy at intermediate temperatures

C. Liu, Jincheng Wang, Junjie Li, 2016, 1606.03693.

An assessment on the future development of high-entropy alloys: Summary from a recent workshop

T. Nieh, C. Liu, J. Yeh, 2015 .

Extremely high dislocation density and deformation pathway of CrMnFeCoNi high entropy alloy at ultralow temperature

B. Wang, C. Liu, Yuan Wu, 2020 .

Ultrahigh-strength and ductile superlattice alloys with nanoscale disordered interfaces

X. J. Liu, J. C. Huang, C. Liu, 2020, Science.

Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates

C. Liu, J. Zhu, J. Kai, 2018 .

Solid solutioning in equiatomic alloys: Limit set by topological instability

Sheng Guo, Zhijun Wang, C. T. Liu, 2014 .

Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys

C. Liu, Junyang He, H. Wang, 2015 .

A geometric model for intrinsic residual strain and phase stability in high entropy alloys

C. T. Liu, Yong Yang, Yong Yang, 2015 .

Design of high entropy alloys: A single-parameter thermodynamic rule

Jian Lu, C. T. Liu, Jian Lu, 2015 .

Anomalous solidification microstructures in Co-free AlxCrCuFeNi2 high-entropy alloys

Sheng Guo, C. T. Liu, C. Liu, 2013 .

The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys

C. Liu, Yanhui Zhang, J. Kai, 2017 .

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl0.5 high-entropy alloy

Akihiko Hirata, Takeshi Fujita, Sheng Guo, 2015 .

Acousto-ultrasonic technique applied to filled-polymer damage assessment

E. Henneke, B. Tang, C. Liu, 1995 .

A new glass-forming ability criterion for bulk metallic glasses

C. Liu, Z. Lu, C. Liu, 2002 .

Characterization of oxide nanoprecipitates in an oxide dispersion strengthened 14YWT steel using aberration-corrected STEM

Akihiko Hirata, Takeshi Fujita, C. T. Liu, 2012 .

Physical factors controlling the ductility of bulk metallic glasses

C. Liu, V. Keppens, Zhiying Zhang, 2008 .

High-temperature ordered intermetallic alloys

C. Koch, C. Liu, N. Stoloff, 1985 .

Saturated magnetization and glass forming ability of soft magnetic Fe-based metallic glasses

C. Liu, Yong Yang, Anding Wang, 2017 .

Atomic-size effect and solid solubility of multicomponent alloys

Yunhao Huang, Zhijun Wang, C. T. Liu, 2015 .

A numerical investigation of the effects of compression force on PEM fuel cell performance

P. Sui, C. Liu, Z. Su, 2008 .

Glass-forming tendency of bulk La–Al–Ni–Cu–(Co) metallic glass-forming liquids

Zhaoping Lu, Y. Li, C. Liu, 2003 .

On The Glass Forming Ability Criteria Of Bulk Metallic Glasses

Zhaoping Lu, C. Liu, 2002 .

Density fluctuations with fractal order in metallic glasses detected by synchrotron X-ray nano-computed tomography

C. Shek, W. Wang, Tao Ge, 2018, Acta Materialia.

The Development of Structure Model in Metallic Glasses

A. Inoue, C. Fan, X. Yue, 2017 .

Quantitatively defining free-volume, interconnecting-zone and cluster in metallic glasses

P. Liaw, C. Liu, C. Fan, 2015 .

Quantitatively defining interconnecting-zone in metallic glasses

X. Yang, P. Liaw, C. Fan, 2014 .

Development of Mg Based Amorphous Alloys with Higher Amounts of Rare Earth Elements

Yinong Wang, T. Hung, Y. C. Chang, 2007 .

Metallic liquids and glasses: atomic order and global packing.

X. J. Liu, X. Hui, Z. Lu, 2010, Physical review letters.

The general effect of atomic size misfit on glass formation in conventional and high-entropy alloys

Shanshe Wang, C. T. Liu, Yong Yang, 2016 .

Atomic-size and lattice-distortion effects in newly developed high-entropy alloys with multiple principal elements

W. Qiu, C. Liu, Yong Yang, 2015 .

Atomic packing symmetry in the metallic liquid and glass states

Zhaoping Lu, G. Zheng, X. Hui, 2011 .

Microstructural evolution of ferritic steel powder during mechanical alloying with iron oxide

Y. Liu, C. Liu, Yuren Wen, 2011 .

Precipitation-hardened high-entropy alloys for high-temperature applications: A critical review

C. Liu, Tao Yang, Wei-hong Liu, 2019, MRS Bulletin.

Co-precipitation of nanoscale particles in steels with ultra-high strength for a new era

C. Liu, Z. Jiao, J. Luan, 2017 .

Intrinsic versus extrinsic effects on serrated flow of bulk metallic glasses

J. Eckert, S. Pauly, Yunxuan Weng, 2015 .

Size effect on stability of shear-band propagation in bulk metallic glasses: an overview

Yong Yang, Y. Yang, C. Liu, 2011, Journal of Materials Science.

In-situ thermographic observation of mechanical damage in bulk-metallic glasses during fatigue and tensile experiments

B. Yang, M. Morrison, P. Liaw, 2004 .

Relating structural heterogeneity to β relaxation processes in metallic glasses

C. Liu, J. Qiao, D. P. Wang, 2019, Materials Research Letters.

Fast secondary relaxation and plasticity initiation in metallic glasses

C. Liu, Jian Lu, Yong Yang, 2018 .

Nanoscale Structural Evolution and Anomalous Mechanical Response of Nanoglasses by Cryogenic Thermal Cycling.

H. Gleiter, Xun-li Wang, H. Hahn, 2018, Nano letters.

Universal secondary relaxation and unusual brittle-to-ductile transition in metallic glasses

Jian Lu, Yong Yang, Steven Wang, 2017 .

Tunable elastic heterogeneity caused by deformation-induced magnetization in flexible metallic glass

Yong Yang, Anding Wang, Bolong Huang, 2017 .

Structural Signature of Plasticity Unveiled by Nano-Scale Viscoelastic Contact in a Metallic Glass

Weihua Wang, W. Wang, Sui‐Dong Wang, 2016, Scientific Reports.

Correlation between local elastic heterogeneities and overall elastic properties in metallic glasses

W. Wang, Wei-Hua Wang, Y. Yang, 2016, 1606.05455.

Competitive formation of glasses and glass–matrix composites

Zhaoping Lu, D. Ma, Y. Chang, 2007 .

Nano-scratch behavior of a bulk Zr-10Al-5Ti-17.9Cu-14.6Ni amorphous alloy

J. G. Wang, T. Nieh, C. Liu, 2000 .

High Bs Fe-based nanocrystalline alloy with high impurity tolerance

C. Liu, Lei Xie, Chun-tao Chang, 2017, Journal of Materials Science.

New glass forming ability criterion derived from cooling consideration

Sheng Guo, C. Liu, C. Liu, 2010 .

Evaluation Of Glass-Forming Ability

Y. Liu, Zhaoping Lu, C. Liu, 2008 .

Atomic packing and size effect on the Hume-Rothery rule

C. Liu, Jincheng Wang, Junjie Li, 2019, Intermetallics.

The corrosion behavior of sintering micro-porous Ni–Cu alloy in hydrofluoric acid solution

C. Liu, Yuehui He, Yao Jiang, 2015 .

Microstructure and mechanical properties of Mo–Mo3Si–Mo5SiB2 silicides

C. Liu, J. Schneibel, D. Easton, 1999 .

Microstructural Effects on Damage Behaviour in Particle Reinforced Composites

Y. Kwon, C. Liu, C. Liu, 2003 .

Tensile properties and fracture toughness of TiAl alloys with controlled microstructures

C. Liu, P. Maziasz, J. Schneibel, 1996 .

The oxidation behavior of a Ni2FeCoCrAl0.5 high-entropy superalloy in O2-containing environments

C. Liu, J. Kai, W. Kai, 2019, Corrosion Science.

Oxidation resistance and mechanical properties of Laves phase reinforced Cr in-situ composites

C. Liu, L. Walker, M. Brady, 2000 .

Effects of alloy additions on the microstructure and properties of CrCr2Nb alloys

C. Liu, P. Tortorelli, C. Carmichael, 1996 .

Brittle fracture and grain boundary chemistry of microalloyed NiAl

E. George, C. Liu, C. Liu, 1990 .

Surface and grain boundary segregation in relation to intergranular fracture: Boron and sulfur in Ni3Al

C. L. White, C. Liu, S. Yalisove, 1984 .

Environmental embrittlement: The major cause of room-temperature brittleness in polycrystalline Ni3Al

E. George, C. Liu, D. Pope, 1992 .

Ductile Ordered Intermetallic Alloys

C. Liu, J. Stiegler, C. Liu, 1984, Science.

Point defect concentrations and hardening in binary B2 intermetallics

Y. Chang, C. Liu, L. M. Pike, 1997 .

Changes in the atomic structure through glass transition observed by X-ray scattering

P. Liaw, Yang Ren, C. Fan, 2012 .

Effects of mixing enthalpy and cooling rate on phase formation of AlxCoCrCuFeNi high-entropy alloys

A. Hirata, T. Nieh, C. Liu, 2019, Materialia.

Phase relations in concentrated Ta-Hf and Nb-Hf alloys

R. Carpenter, P. Mardon, C. Liu, 1971 .

Enthalpies of formation of binary Laves phases

P. Liaw, C. Liu, J. Zhu, 2002 .

Copper-Rich Nanoclusters: Ferritic Steels Strengthened

C. Liu, Z. Jiao, J. Luan, 2016 .

Room temperature ductility of NiAl-strengthened ferritic steels: Effects of precipitate microstructure

E. Kenik, P. Liaw, C. Liu, 2012 .

Structure and mechanical properties of internally oxidized Ta-8 Pct W-2 Pct Hf (T-111) alloy

C. Liu, R. Carpenter, H. Inouye, 1973 .

Physical metallurgy and mechanical properties of ductile ordered alloys (Fe, Co, Ni)3 V

C. Liu, C. Liu, C. Liu, 1984 .

Influence of pH on the passivation behavior of 254SMO stainless steel in 3.5% NaCl solution

C. Liu, Jiann-Kuo Wu, C. Liu, 2007 .

Load relaxation studies of grain boundary effects in two Ni3Al alloys at elevated temperatures

C. Liu, Che-yu Li, V. Sikka, 1987 .

Adiabatic temperature of combustion synthesis of Al–Ni systems

J. Li, C. Liu, P. Zhu, 2003 .

INVESTIGATING THE CONSTRAINT EFFECT IN A PARTICULATE COMPOSITE MATERIAL

C. Liu, C. Liu, 2022 .

Grain-boundary contamination and ductility loss in boron-doped Ni3Al

C. Liu, M. Takeyama, C. Liu, 1989 .

Dynamic embrittlement of boron-doped Ni3Al alloys at 600°C☆

C. L. White, C. Liu, C. Liu, 1987 .

Effect of test environment on ductility and fracture behavior of boron-doped Ni3Al at 600° C

Eal H. Lee, C. L. White, C. Liu, 1985 .

Reactive sintering of Ni3Al under compression

C. Liu, C. Nishimura, C. Liu, 1993 .

Microstructures and mechanical properties of Ni3Al alloyed with iron additions

C. Liu, M. Santella, J. Horton, 1987, Metallurgical and Materials Transactions A.

Effects of testing environment on the elevated temperature ductility of boron-doped Ni3Al

C. Liu, A. Taub, K. Chang, 1986 .

Cooling rate effect on Young's modulus and hardness of a Zr-based metallic glass

Jian Lu, Yanhui Liu, Sheng Guo, 2011 .

Atomistic free-volume zones and inelastic deformation of metallic glasses.

C. Liu, Y. Yang, J. Lu, 2010, Nature materials.

The oxidation behavior of Ni2FeCoCrAlx high-entropy alloys in dry air

C. Liu, J. Kai, W. Kai, 2020 .

Effect of low-pressure hydrogen on the room-temperature tensile ductility and fracture behavior of Ni3Al

R. Zee, E. George, C. Liu, 1996 .

Effects of boron on the fracture behavior and ductility of cast Ti–6Al–4V alloys

E. George, C. Liu, Z. Jiao, 2015 .

Effects of alloying elements on dendritic segregation in iridium alloys

E. George, C. Liu, Yong Liu, 2008 .

Effect of Aluminum Concentration And Boron Dopant on Environmental Embriitlement In Feal Aluminides

E. George, C. Liu, C. Liu, 1990 .

Precipitate transformation from NiAl-type to Ni2AlMn-type and its influence on the mechanical properties of high-strength steels

Michael K Miller, C. T. Liu, C. Liu, 2016 .

Group precipitation and age hardening of nanostructured Fe-based alloys with ultra-high strengths

C. Liu, Z. Jiao, J. Luan, 2016, Scientific Reports.

Ordered intermetallic alloys, part I: Nickel and iron aluminides

C. Liu, K. Kumar, C. Liu, 1993 .

Evaluation of Mn substitution for Ni in alumina-forming austenitic stainless steels

P. Maziasz, N. Evans, M. Brady, 2009 .

Alloying effects on creep and oxidation resistance of austenitic stainless steel alloys employing intermetallic precipitates

C. Liu, Zhaoping Lu, P. Maziasz, 2008 .

Alumina-Forming Austenitic Stainless Steels Strengthened by Laves Phase and MC Carbide Precipitates

Zhaoping Lu, P. Maziasz, M. Brady, 2007 .

Creep-Resistant, Al2O3-Forming Austenitic Stainless Steels

Y. Yamamoto, P. J. Maziasz, K. L. More, 2007, Science.

Composition dependence of structure, physical and mechanical properties of FeCoNi(MnAl)x high entropy alloys

Anding Wang, Panpan Li, C. Liu, 2017 .

Unified equation for the strength of bulk metallic glasses

T. G. Nieh, C. T. Liu, T. Nieh, 2006 .

Atomistic mechanism of nano-scale phase separation in fcc-based high entropy alloys

Mingwei Chen, Xiandong Xu, C. Yu, 2016 .

The Phase Competition and Stability of High-Entropy Alloys

Yehui Zhang, Z. Lu, W. Liu, 2014 .

Recent advances in ordered intermetallics

C. Liu, C. Liu, C. Liu, 1994 .

Effects of Mn partitioning on nanoscale precipitation and mechanical properties of ferritic steels strengthened by NiAl nanoparticles

Michael K Miller, C. T. Liu, Z. B. Jiao, 2015 .

Microstructural characterization of segregation and precipitation in α2+γ titanium aluminides

C. Liu, D. Larson, M. K. Miller, 1997 .

Characteristics of a sintered porous Ni–Cu alloy cathode for hydrogen production in a potassium hydroxide solution

C. Liu, Yuehui He, B. Nan, 2016 .

Synthesis of tungsten oxide tapered needles with nanotips

J. Zou, P. Liaw, C. Liu, 2007 .

The generalized thermodynamic rule for phase selection in multicomponent alloys

Jian Lu, C. T. Liu, C. Liu, 2015 .

Electrochemical performance of porous Ni3Al electrodes for hydrogen evolution reaction

N. Xu, C. Liu, Yuehui He, 2011 .

Role of yttrium in glass formation of Fe-based bulk metallic glasses

C. Liu, Zhaoping Lu, W. Porter, 2003 .

Role of minor alloying additions in formation of bulk metallic glasses: A Review

C. Liu, Zhaoping Lu, Z. Lu, 2004 .

Understanding chemical short-range ordering/demixing coupled with lattice distortion in solid solution high entropy alloys

J. G. Wang, C. Pao, J. Luan, 2021 .

Analysis of Particulate Composite Materials Using an Element Overlay Technique

Hiroshi Okada, Noriyoshi Kumazawa, Takashi Ninomiya, 2004 .

Shear-banding Induced Indentation Size Effect in Metallic Glasses

W. Wang, Y. Yang, Yong Yang, 2016, Scientific Reports.

New NiAl-strengthened ferritic steels with balanced creep resistance and ductility designed by coupling thermodynamic calculations with focused experiments

Fan Zhang, Michael K Miller, Peter K. Liaw, 2012 .

Influence of Aging and Thermomechanical Treatments on the Mechanical Properties of a Nanocluster-Strengthened Ferritic Steel

M. Chen, B. Chin, G. Chen, 2011, Metallurgical and Materials Transactions A.

Effects of proton irradiation on nanocluster precipitation in ferritic steel containing fcc alloying additions

B. Chin, C. Liu, J. Williams, 2012 .

Thermographic studies of temperature evolutions in bulk metallic glasses: An overview

Bing Yang, P. Liaw, Gongyao Y. Wang, 2012 .

Glass formation criterion for various glass-forming systems.

Z. Lu, C. Liu, C. Liu, 2003, Physical review letters.

Weldability and hot cracking in thorium-doped iridium alloys

S. David, C. Liu, C. Liu, 1980 .

Porous FeAl intermetallics fabricated by elemental powder reactive synthesis

N. Xu, J. Zou, C. Liu, 2009 .

Origin of Shear Stability and Compressive Ductility Enhancement of Metallic Glasses by Metal Coating

S. H. Chen, C. Liu, Z. G. Zhu, 2016, Scientific Reports.

Transformation-mediated Plasticity in CuZr based Metallic Glass Composites: A Quantitative Mechanistic Understanding

J. Eckert, S. Pauly, Y. Yang, 2016, 1603.02788.

Dual character of stable shear banding in bulk metallic glasses

Jianchao Ye, Jian Lu, Yong Yang, 2011 .

Thermodynamic modeling and experimental validation of the Fe-Al-Ni-Cr-Mo alloy system

P. Liaw, Shenyang Huang, F. Zhang, 2012 .

Recent progress in quantifying glass-forming ability of bulk metallic glasses

H. Bei, Zhaoping Lu, C. Liu, 2007 .

Corrosion–fatigue studies of the Zr-based Vitreloy 105 bulk metallic glass

M. Morrison, P. Liaw, R. Buchanan, 2007 .

Test environments and mechanical properties of Zr-base bulk amorphous alloys

C. Liu, A. Inoue, M. Yoo, 1998 .

The fatigue behavior of a zirconium-based bulk metallic glass in vacuum and air

P. Liaw, R. Buchanan, W. Peter, 2003 .

Fatigue behavior of Zr52.5Al10Ti5Cu17.9Ni14.6 bulk metallic glass

C. R. Brooks, P. Liaw, R. Buchanan, 2002 .

Nanocrystallization of Zr61Al7.5Cu17.5Ni10Si4 metallic glass

C. Liu, J.S.C. Jang, L. Chang, 2009 .

Effect of oxygen inclusion on microstructure and thermal stability of copper nitride thin films

Z. Cao, Yong Du, Rao Huang, 2007 .

Vacancy formation enthalpies of high-entropy FeCoCrNi alloy via first-principles calculations and possible implications to its superior radiation tolerance

Kui Liu, C. Liu, Yiyi Li, 2018 .

Dynamic evolution of nanoscale shear bands in a bulk-metallic glass

M. Denda, B. Yang, M. Morrison, 2005 .

A new approach to understanding and measuring glass formation in bulk amorphous materials

Zhaoping Lu, C. Liu, C. Liu, 2004 .

Effect of grain size on yield strength of Ni_3Al and other alloys

C. Liu, M. Takeyama, C. Liu, 1988 .

Physical Metallurgy and Mechanical Properties of Transition-Metal Laves Phase Alloys

C. Liu, M. Brady, J. Zhu, 2000 .

Microstructure and mechanical properties of Laves-phase alloys based on Cr2Nb

C. Liu, M. Takeyama, C. Liu, 1991 .

New criterion of glass forming ability for bulk metallic glasses

Zhaoping Lu, X. Du, C. Liu, 2007 .

Superior Tensile Ductility in Bulk Metallic Glass with Gradient Amorphous Structure

C. Liu, Y. Yang, H. Ruan, 2014, Scientific Reports.

Characteristic length scales governing plasticity/brittleness of bulk metallic glasses at ambient temperature

P. Liaw, Jianchao Ye, Jian Lu, 2010 .

Atomic-scale structural evolution and stability of supercooled liquid of a Zr-based bulk metallic glass.

C. Liu, Y. Yang, Y. Dong, 2011, Physical review letters.

Structural model for bulk amorphous alloys

P. Liaw, H. Choo, C. Fan, 2006 .

Site occupancies, point defect concentrations, and solid solution hardening in B2 (Ni,Fe)Al

Y. Chang, C. Liu, L. M. Pike, 2002 .

Thermal and mechanical properties of the Zr53Cu30Ni9Al8 based bulk metallic glass microalloyed with silicon

J. C. Huang, C. Liu, J. S. Jang, 2009 .

The electrochemical evaluation of a Zr-based bulk metallic glass in a phosphate-buffered saline electrolyte.

M. Morrison, P. Liaw, R. Buchanan, 2005, Journal of biomedical materials research. Part A.

Glass Forming Ability and Thermal Properties of the Mg-Based Amorphous Alloys with Dual Rare Earth Elements Addition

L. Chang, Cheng-Hao Tseng, C. F. Chang, 2007 .

Thermodynamic origins of shear band formation and the universal scaling law of metallic glass strength.

W. Wang, Y. H. Liu, M. Chen, 2009, Physical review letters.

Local Fracture and Crack Growth Behavior in a Particulate Composite Material

C. Liu, K. Ravi-Chandar, C. Liu, 1996 .

Chromium addition and environmental embrittlement in Fe3Al

C. Liu, C. G. Mckamey, C. Liu, 1990 .

Mechanical properties of porous Fe–Al intermetallics

J. Zou, C. Liu, Y. H. He, 2015 .

Boron solubility and boride compositions in α2 + γ titanium aluminides

C. Liu, D. Larson, M. K. Miller, 1997 .

Pore structure control for porous FeAl intermetallics

N. Xu, J. Zou, C. Liu, 2013 .

Recent advances in B2 iron aluminide alloys : deformation, fracture and alloy design

E. George, C. Liu, P. Maziasz, 1998 .

Mechanical properties of single crystal tungsten microwhiskers characterized by nanoindentation

Han Huang, J. Zou, C. Liu, 2009 .

Tuning the indirect-direct band gap transition in the MoS2-xSex armchair nanotube by diameter modulation.

C. Liu, Q. Meng, Honghui Wu, 2018, Physical chemistry chemical physics : PCCP.

The oxidation of Ni3Si-base alloys

C. Koch, C. Liu, N. Sukidi, 1995 .

Softening-induced plastic flow instability and indentation size effect in metallic glass

S. Shi, Yong Yang, S. Wang, 2015 .

Structure Heterogeneity in Metallic Glass： Modeling and Experiment

H. Ke, Yong Yang, C. Liu, 2014 .

Origin of yielding in metallic glass: Stress-induced flow

Mingwei Chen, Yong Yang, Z. Y. Liu, 2014 .

Effect of size and base-element on the jerky flow dynamics in metallic glass

H. Ke, Yong Yang, B. Sun, 2014 .

Yielding and shear banding of metallic glasses

Yong Yang, Z. Y. Liu, C. Liu, 2013 .

Evolution of shear bands and its correlation with mechanical response of a ductile Zr55Pd10Cu20Ni5Al10 bulk metallic glass

A. Inoue, Yanhui Liu, Mingwei Chen, 2010 .

Localized heating and fracture criterion for bulk metallic glasses

T. Nieh, B. Yang, M. Morrison, 2006 .

Crystallization and nanoindentation behavior of a bulk Zr–Al–Ti–Cu–Ni amorphous alloy

J. G. Wang, T. Nieh, C. Liu, 2000 .

Environmental effects on room-temperature ductility and fracture in Fe3Al☆

C. Liu, E. H. Lee, C. G. Mckamey, 1990 .

An environmental effect as the major cause for room-temperature embrittlement in FeAl☆

Eal H. Lee, C. Liu, C. G. McKamey, 1989 .

Ordered intermetallic alloys: an assessment

C. Liu, J. Stringer, J. Mundy, 1997 .

Growth, microstructure and mechanical properties of CoCrFeMnNi high entropy alloy films

C. Liu, Tzu-Hsuan Huang, J. Kai, 2020 .

A ductile high entropy alloy with attractive magnetic properties

Anding Wang, Panpan Li, C. Liu, 2017 .

Mechanical behavior of bulk amorphous alloys reinforced by ductile particles at cryogenic temperatures.

P. Liaw, H. Choo, C. Fan, 2006, Physical review letters.

Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation-strengthened ferritic alloys

A. Hirata, Yunping Li, A. Chiba, 2013 .

Characterization of porous Ni3Al electrode for hydrogen evolution in strong alkali solution

N. Xu, J. Zou, C. Liu, 2013 .

Quantitative determination of the lattice constant in high entropy alloys

D. Lin, Jincheng Wang, Zhijun Wang, 2019, Scripta Materialia.

Development of Nickel aluminide matrix composites

C. Liu, Jenn‐Ming Yang, W. Kao, 1989 .

Compositional and microstructural optimization and mechanical-property enhancement of cast Ti alloys based on Ti-6Al-4V alloy

C. Liu, Zhaoping Lu, Z. Jiao, 2017 .

Deformation of a multiphase Mo–9.4Si–13.8B alloy at elevated temperatures

T. Nieh, C. Liu, Jiong Wang, 2001 .

Correlation between primary phases and atomic clusters in a Zr-based metallic glass

X. J. Liu, G. Chen, C. Liu, 2010 .

Phase Selection in High-Entropy Alloys: From Nonequilibrium to Equilibrium

Zhijun Wang, Sheng Guo, C. T. Liu, 2014 .

Use of thiourea to inhibit the incorporation of hydrogen in Ti and Ti-6Al-4V alloy

C. Liu, Jiann-Kuo Wu, Tair-I Wu, 1997 .

Enhanced plasticity in a Zr-based bulk metallic glass composite with in situ formed intermetallic phases

H. Bei, E. George, C. Liu, 2009 .