Tatsuo Inoue

发表

Fatigue-creep life prediction of 214Cr-1Mo steel under combined tension-torsion at 600°C

Shigeru Kishi, Tatsuo Inoue, Hiroyuki Koto, 1994 .

Fatigue-creep life prediction for a notched specimen of 214Cr1Mo steel at 600°C

Yoshio Fukuda, Toshihide Igari, Masao Sakane, 1994 .

Quenching Process Simulation of Japanese Sword Covered with Clay.

Tatsuo Inoue, Takuya Uehara, 1995 .

Inelastic behaviour of 214Cr-1Mo steel under plasticity-creep interaction condition: An interim report of the Bench Mark project by the subcommittee on inelastic analysis and life prediction of high temperature materials, JSMS☆

Sumio Murakami, Toshihide Igari, Akihiko Suzuki, 1985 .

721 Identifying Transformation Plasticity Characteristics by Numerical Calculation

Tatsuo Inoue, 2011 .

Benchmark Project on the Application of Inelastic Constitutive Relations in Plasticity-Creep Interaction Condition to Structural Analysis and the Prediction of Fatigue-Creep Life.

Tatsuo Inoue, 1992 .

Evaluation of inelastic constitutive models under plasticity-creep interaction in multiaxial stress state

Nobutada Ohno, Yasushi Niitsu, Fusahito Yoshida, 1991 .

Evaluation of inelastic constitutive models under plasticity-creep interaction for 214Cr—1Mo steel at 600°C☆

Nobutada Ohno, Toshihide Igari, Akihiko Suzuki, 1989 .

Fatigue-creep life prediction of 214Cr—1Mo steel by inelastic analysis

Toshihide Igari, Masao Sakane, Tatsuo Inoue, 1989 .

Non-contact acoustic tests based on nanosecond laser ablation: Generation of a pulse sound source with a small amplitude

Itsuro Kajiwara, Naoki Hosoya, Koh Umenai, 2014 .

Inelastic stress-strain response for notched specimen of 214Cr-1Mo steel at 600°C

Yoshio Fukuda, Kazunari Fujiyama, Kazumi Aoto, 1994 .

Low Cycle Fatigue under Multiaxial Stresses : In the Case of Combined Cyclic Tension-Compression and Cyclic Torsion at Room Temperature

Tatsuo Inoue, Tatsuo Inoue, Suji Taira, 1969 .

Analysis of DC gas flow in GM type double inlet pulse tube refrigerators

Masafumi Nogawa, Tatsuo Inoue, Shaowei Zhu, 2009 .

Description of transformation kinetics, heat conduction and elastic-plastic stress in the course of quenching and tempering of some steels

Tatsuo Inoue, Tatsuo Inoue, S. Nagaki, 1981 .

Inelastic stress-strain response of 214Cr-1Mo steel under combined tension-torsion at 600°C

Nobutada Ohno, Yasushi Niitsu, Akihiko Suzuki, 1994 .

Development of a YBa2Cu3O7 filament leads unit

Tatsuo Inoue, Shaowei Zhu, Tomoko Goto, 2003 .

Life prediction based on analysis of crack coalescence in low cycle fatigue

Tatsuo Inoue, Toshihiko Hoshide, M. Miyahara, 1987 .

Evaluation of fatigue-creep life prediction methods in multiaxial stress state

Toshihide Igari, Masao Sakane, Tatsuo Inoue, 1991 .