Yukio Takahashi

发表

Fatigue-creep life prediction of 214Cr-1Mo steel under combined tension-torsion at 600°C

Shigeru Kishi, Tatsuo Inoue, Hiroyuki Koto, 1994 .

Required Signals for Test Disc Used for Audio and Acoustic Measurements

Takeaki Anazawa, Yukio Takahashi, Tsukasa Igarashi, 1993 .

Study on creep-fatigue evaluation procedures for high-chromium steels—Part I: Test results and life prediction based on measured stress relaxation

Yukio Takahashi, Yukio Takahashi, 2008 .

Dynamic Behaviour of Variable Displacement Compressor for Automotive Air Conditioners

Kenji Tojo, Yukio Takahashi, Kunihiko Takao, 1990 .

Evaluation of Weldment Strength-Reduction Factors for Fast Reactor Components Considering Gage Length Effect

Yukio Takahashi, H. Koto, T. Sakon, 1993 .

Imaging by Synchrotron Radiation

Yukio Takahashi, 2010 .

Study on creep-fatigue failure prediction methods for type 304 stainless steel

Takashi Ogata, Koji Take, Yukio Takahashi, 1995 .

JSME Construction Standard for Superconducting Magnet of Fusion Facility “Procedure for Structural Design”

K. Kitamura, Masataka Nakahira, Junji Ohmori, 2009 .

Comparison of stress intensity factor solutions for cylinders with axial and circumferential cracks

Naoki Miura, Hiroshi Shibamoto, Kazuhiko Inoue, 2008 .

Evaluation of leak-before-break assessment methodology for pipes with a circumferential through-wall crack. Part I: stress intensity factor and limit load solutions

Yukio Takahashi, Yukio Takahashi, 2002 .

Coherent diffraction microscopy at SPring-8: instrumentation, data acquisition and data analysis

Yoshiki Kohmura, Jianwei Miao, Chien-Chun Chen, 2011, Journal of synchrotron radiation.

Application of a two-surface plasticity model for thermal ratcheting and failure life estimation in

Yukio Takahashi, 1995 .

Evaluation of Stress-Increase Caused by Geometric Imperfections in Longitudinally-Welded Hot Reheat Steam Piping of Mod. 9Cr-1Mo Steel

Masatsugu Yaguchi, Yukio Takahashi, Haruhisa Shigeyama, 2017 .

Digital Time-Coherent Recording Technique

Takeaki Anazawa, Almon H. Clegg, Yukio Takahashi, 1987 .

Effect of ratcheting deformation on fatigue and creep-fatigue life of 316FR stainless steel

Tomomi Otani, Yukio Takahashi, Hiroshi Ishikawa, 2008 .

Elastic-Plastic Constitutive Modeling of Concrete

Yukio Takahashi, Yukio Takahashi, 1983 .

Fracture Mechanis. Simplified J-Integral valuation Method for Flaw Evaluation at High Temperature. I. Systematization of Simplified J-Integral Evaluation Method for Flaw Evaluation at High Temperature.

Naoki Miura, Takashi Shimakawa, Yukio Takahashi, 2000 .

High-Temperature Crack Growth Behavior of High-Chromium Steels

Ken-ichi Kobayashi, Fumiko Kawashima, Toshihide Igari, 2005 .

Flaw Assessment Procedure for High-Temperature Reactor Components

Robert A. Ainsworth, M. B. Ruggles, Yukio Takahashi, 1992 .

Development of inelastic constitutive model for austenitic stainless steel for design use

Hiroshi Shibamoto, Yukio Takahashi, Kazuhiko Inoue, 2008 .

Fracture behavior of cracked type 304 stainless steel pipes under tensile and thermal loadings

Kunio Hasegawa, Genki Yagawa, Masahiro Saito, 1985 .

Three-Dimensional Fully Plastic Solutions for Plates and Cylinders With Through-Wall Cracks

Genki Yagawa, Yukio Takahashi, H. Ueda, 1985 .

Study on Type-IV Damage Prevention in High-Temperature Welded Structures of Next-Generation Reactor Plants: Part II — Effect of Boron on Creep Properties and Microstructures of HAZ for High Cr Steels

Yukio Takahashi, Masaaki Tabuchi, Hiromichi Hongo, 2006 .

Study on creep-fatigue life prediction methods for low-carbon nitrogen-controlled 316 stainless steel (316FR)

Hiroshi Shibamoto, Yukio Takahashi, Yukio Takahashi, 2008 .

OS1308 Study on Predictability of Creep-fatigue Life of High-chromium Welded Joint

Yukio Takahashi, 2008 .

Evaluation of Microstructures and Creep Damages in HAZ of P91 Steel Weldment

Yukio Takahashi, Yongkui Li, Masaaki Tabuchi, 2007 .

Study on Type-IV Damage Prevention in High-Temperature Welded Structures of Next-Generation Reactor Plants: Part I — Fatigue and Creep-Fatigue Behavior of Welded Joints of Modified 9Cr-1Mo Steel

Yukio Takahashi, 2006 .

Thermal Fatigue Behavior of a SUS304 Pipe Under Longitudinal Cyclic Movement of Axial Temperature Distribution

Yukio Takahashi, Masafumi Yamauchi, Tomomi Ohtani, 1996 .

Prediction of Built-Up Layer and Built-Up Edge Formation in Dry Cutting of SUS304 Stainless Steel

Yukio Takahashi, Tohru Ihara, Tohru Ihara, 2019, Int. J. Autom. Technol..

Effect of Grain Size on High-Temperature Strength of Fast Reactor Spec. SUS316.

Yukio Takahashi, Shingo Date, Takanori Nakazawa, 1997 .

Evaluation of Microstructures and Creep Damages in the HAZ of P91 Steel Weldment

Yukio Takahashi, Yongkui Li, Masaaki Tabuchi, 2009 .

Evaluation of Creep Strength Reduction Factors for Welded Joints of Modified 9Cr-1Mo Steel (P91)

Yukio Takahashi, Masaaki Tabuchi, Yukio Takahashi, 2006 .

Stable Growth and Instability of Circumferential Cracks in Type 304 Stainless Steel Pipes Under Tensile Load

Kunio Hasegawa, Genki Yagawa, Yukio Takahashi, 1984 .

Microstructures and Type-IV Creep Damage of High Cr Steel Welds

Yukio Takahashi, Masaaki Tabuchi, Hiromichi Hongo, 2009 .

Long-term creep rupture behavior of smoothed and notched bar specimens of low-carbon nitrogen-controlled 316 stainless steel (316FR) and their evaluation

Hiroshi Shibamoto, Yukio Takahashi, Kazuhiko Inoue, 2008 .

FATIGUE CRACK PROPAGATION UNDER CYCLIC THERMAL STRESS

Hiroyuki Koto, Yukio Takahashi, H. Kaguchi, 1998 .

Evaluation of Creep Strength Reduction Factors for Welded Joints of HCM12A (P122)

Yukio Takahashi, Masaaki Tabuchi, Yukio Takahashi, 2006 .

Improvement of Structural Integrity Assessment Guideline for Fast Reactor Components- Part I : Evaluation of Defect-Free Structures

Yukio Takahashi, Genki Yagawa, Genki Yagawa, 2001 .

Evaluation of J-integral for surface cracked plates under biaxial loading using extended reference stress method

Naoki Miura, Yukio Takahashi, Yukio Takahashi, 2010 .