Yuji Ishino

发表

Characteristics of a Force-balance Nozzle-flapper Type Pneumatic Pressure Control Proportional Valve. Part 1. Output Pressure versus Nozzle-Flapper Clearance Characteristics.

Kenji Araki, Naike Chen, Yuji Ishino, 1995 .

Development of bilateral operation system for the assembly of magnetized components

Yuji Ishino, Takeshi Mizuno, Ryu Monjiyama, 2020 .

Actuation Force Measurement Mechanism for Non-Contact Ultrasonic Suspension

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2012 .

A 3-DOF modular vibration isolation system using zero-power magnetic suspension with adjustable negative stiffness

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010, 2010 11th IEEE International Workshop on Advanced Motion Control (AMC).

Study on Control System for Active Magnetic Bearing Considering Motions of Stator

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2009 .

21614 磁気浮上系の局所電流フィードバックによる負のバネ剛性制御 : (第2報)飽和要素を利用した剛性の切換え制御(電磁力の制御,OS.1 実システムのモデリングと制御)

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2007 .

Zero-power control of double parallel magnetic suspension system with mixed polarity

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2014, IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society.

1P2-U03 Prototyping of soft actuator for space environment

Yuji Ishino, Masayuki Hara, Masaya Takasaki, 2015 .

Development of an Active Vibration Isolation System Using Linearized Zero-Power Control With Weight Support Springs

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010 .

207105 Development of Mass Measurement System Using Velocity Relay Feedback : 1st report : Mass Estimation Considering Stiffness

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2011 .

Zero-Power Control of Parallel Magnetic Suspension Systems

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010 .

Development of non-contact carrier system using solar magnetic suspension (3ed report: Continuous 5-day and installation of sloping propulsion mechanism)

Yuji Ishino, Masayuki Hara, Masaya Takasaki, 2015, 2015 10th Asian Control Conference (ASCC).

C203 Mass Measurement Using the Fixed-Point of a Spring-Mass System with a Dynamic Vibration Absorber : 2nd report: Fabrication of a Measuring Apparatus

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2011 .

Novel Study on Self-Tickling Using Robotics and Haptics Technologies

Yuji Ishino, Masayuki Hara, Masaya Takasaki, 2018 .

Three-Dimensional Force Measurement and Control of a Flux-Path Control Magnetic Suspension

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2008 .

Development of Three-Axis Active Vibration Isolator Using Displacement Cancellation Technique

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2011 .

Flux-path control module using a single actuator

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2009, 2009 ICCAS-SICE.

Realization of Stable Trajectory in Mass Measurement System Using Relay Feedback of Velocity and Restoring Force Compensation

Yuji Ishino, Takeshi Mizuno, Daisuke Yamaguchi, 2019 .

Proposal of Force Measurement Using Series Magnetic Suspension

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2012 .

Production of SHINANSYA

Yuji Ishino, Yukio Yamada, Tsugio Yamazaki, 2004 .

多重磁気浮上システム : 第1報,基本構想と基本定理(機械力学,計測,自動制御)

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010 .

A six-axis hybrid vibration isolation system using active zero-power control supported by passive weight support mechanism

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010 .

Experimental Studies on the Structural Optimization of the Narrow Cylinder Room of a Short-Stroke Pneumatic Cylinder

Yuji Ishino, Kenji Araki, Takanori Yamada, 1999 .

Controllability of Parallel Magnetic Suspension System with Mixed Magnetic Polarity

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2011 .

Reduction of Noise in MEMS Output Signals by Kalman-filter Estimation

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2014 .

Development of a Bilateral Operation System for the Assembly of Magnetized Components

Yuji Ishino, Takeshi Mizuno, Ryu Monjiyama, 2019 .

Parallel-mechanism based vibration isolation system using displacement cancellation control

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2015, 2015 10th Asian Control Conference (ASCC).

Stiffness control of magnetic suspension by local current feedback

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2009, 2009 European Control Conference (ECC).

A model-based controller for a vibration isolation system with weight support springs

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2006 .

Magnetic suspension system using three flux path control modules

Yuzo Hirai, Yuji Ishino, Masaya Takasaki, 2006 .

Concept and Prototype of Soft Actuator for Liquid Nitrogen Temperature Environments

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2020, J. Robotics Mechatronics.

Vibration Isolation System Using Zero-Power Magnetic Suspension (2nd Report, Introduction of Weight Support Mechanism)

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2006 .

Self-Sensing Magnetic Suspension Using an H-bridge Type Hysteresis Amplifier Operating in Two Quadrants

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2005 .

Proposal of lateral vibration control based on force detection in magnetic suspension system

Yuji Ishino, Takeshi Mizuno, Daisuke Yamaguchi, 2016 .

Study on the Basic Characteristics of Flux-Path Control Magnetic Suspension and Realization of Levitation

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2008 .

A Modular-Type Three-Axis Vibration Isolation System Using Negative Stiffness

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010 .

415 Proposal of Diagnosis using Ultrasonic Dental Scaler with Resonance Frequency Tracing System

Yuji Ishino, Takeshi Mizuno, Yutaka Maruyama, 2007 .

Proposal of a new configuration for magnetically suspended gyro

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.

Resonance frequency tracking control of ultrasonic transducer for diminished haptics

Yuji Ishino, Masayuki Hara, Masaya Takasaki, 2017, 2017 11th Asian Control Conference (ASCC).

B11 Development of a 2-DOF Active Magnetically Suspended Micro Gyro : 1st report:Basic Concepts and Measurement Principle

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2013 .

Flux Path Control Magnetic Suspension (Development of a System Using Voice Coil Motors)

Yuzo Hirai, Yuji Ishino, Masaya Takasaki, 2006 .

An Application of Active Magnetic Bearing to Gyroscopic and Inertial Sensors

Yuji Ishino, Takayuki Ishigami, Masaya Takasaki, 2008 .

Mass measurement using the fixed-point of a spring-mass system with a dynamic vibration absorber and an inertial-mass vibrator

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2015 .

Cost-Effective Implementation of Acceleration Feedback to Vibration Isolation System Using Negative Stiffness

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2012 .

Realization of a Zero-compliance System by Using Displacement Cancellation Control

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010 .

616 Speed Control of SAW Linear Motor

Yuji Ishino, Masaya Takasaki, Hiroyuki Kotani, 2005 .

437 Development of a Flux-Path Control Magnetic Suspension System with Swing-Type Control Plates : 2nd Report, Realization of Zero-Power Control

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2009 .

Development of accelerometer with Zero-Compliance Mechanism ( 1st report ) Principle of Measurement

Yuji Ishino, Hiroki Kawada, Masaya Takasaki, 2017 .

Extension of measurement bandwidth in an AMB-based gyroscopic sensor

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2009 .

Mass Measurement Using the Fixed Point of a Spring-Mass System with a Dynamic Vibration Absorber

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2012 .

Intermediate Control for Stable Trajectory in a Relay-Feedback Mass Measurement System*

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2019, 2019 12th Asian Control Conference (ASCC).

The proposal of magnetic suspension using laterally control flux-path mechanism

Yuji Ishino, Takeshi Mizuno, Daisuke Yamaguchi, 2017 .

Study on Double Parallel Magnetic Suspension System With Parallel Connection

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2012 .

Realization of acceleration feedback by using an active dynamic vibration absorber as a sensor in a low-frequency region

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2015, 2015 European Control Conference (ECC).

Active Stabilization of Repulsive Magnetic Bearing by Using Independent Motion Control of Permanent Magnets

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2007 .

Application of Unbalance Compensation to a Rotary Gyro with Hybrid Suspension

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2014 .

Design and Fabrication of an Enlarged Wind Tunnel System for Spinning Body Using Magnetic Suspension

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2016 .

Retrofitting A Passive Vibration Isolation System with Zero-Compliance Modules

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2014 .

Analysis of friction-induced oscillation in negative stiffness control system

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2011, IEEE Conference on Decision and Control and European Control Conference.

Application of Rotor Unbalance Compensation to an AMB-Based Gyroscopic Sensor

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2009 .

Application of a model reference fuzzy adaptive control to the spot welding system

Yuji Ishino, Kenji Araki, Takeshi Mizuno, 1996, Proceedings of the 35th SICE Annual Conference. International Session Papers.

A simple action of right index finger induces rubber hand illusion to static left hand

Yuji Ishino, Masayuki Hara, Masaya Takasaki, 2016, 2016 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

Design of a mode-based controller for 3-DOF vibration isolation system

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2004, IEEE Conference on Robotics, Automation and Mechatronics, 2004..

Validation of multi-dimensional force measurement using zero-compliance mechanism

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2018 .

Two-Dimensional Inverted Pendulum Using Repulsive Magnetic LevitationBewegungsführung eines zweidimensionalen inversen Pendels mit Hilfe von Magneten

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010, Autom..

VIBRATION ISOLATION SYSTEM USING ZERO-POWER MAGNETIC SUSPENSION WITH A WEIGHT SUSPENSION MECHANISM

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2005 .

Active vibration isolation using negative stiffness and displacement cancellation controls: Comparison based on vibration isolation performance

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2015 .

On the simultaneous realization of virtually zero-power and zero-compliance controls

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2013, 52nd IEEE Conference on Decision and Control.

An Application of Relay Feedback to Mass Measurement Under Weightless Conditions

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2007 .

Vibration isolation unit combining a air spring with a voice coil motor for negative stiffness

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2007, 2007 European Control Conference (ECC).

221 AN ACTIVE MICROVIBRATION ISOLATOR WITH MAGNETIC SUSPENSION TECHNOLOGY(General Session III)

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2005 .

Application of phase-locked loop to mass measurement using damped dynamic vibration absorber

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2017, 2017 11th Asian Control Conference (ASCC).

Realization of Vibration Absorption at Multiple Frequencies on Vacuum Chamber with Cryopump*

Yuji Ishino, Masayuki Hara, Masaya Takasaki, 2019, 2019 12th Asian Control Conference (ASCC).

Application of Feedforward Control to A Vibration Isolation System Using Negative Stiffness Suspension

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2011 .

Realization of zero-power control in a two-degree-of-freedom double parallel magnetic suspension system

Yuji Ishino, Masayuki Hara, Masaya Takasaki, 2017, 2017 11th Asian Control Conference (ASCC).

Velocity Control of Surface Acoustic Wave Linear Motor Using PWM

Yuji Ishino, Masaya Takasaki, Hiroyuki Kotani, 2006 .

424 Microassembly using Surface Tension : 1st report:Principle and Basic Experiments

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2007 .

Force compensation for anti-collision in placing a magnetized component on ferromagnetic plate

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2016, 2016 European Control Conference (ECC).

Development of a Motion and Force Compound Control Cylinder for Spot-Welding (1st Report, Parameter Optimization of the Force Control Cylinder)

Yuji Ishino, Kenji Araki, Chen Jian-Bo, 1996 .

A three-axis vibration isolation system using modified zero-power controller with parallel mechanism technique

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2011 .

Fabrication of a Three-dimensional Force Measurement System Using Double Series Magnetic Suspension

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2016 .

Controllability and Observability of Parallel Magnetic Suspension Systems

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2016 .

Development of a Hysteresis Amplifier with an H-bridge Drive for Self-Sensing Magnetic Suspension

Yuji Ishino, Takeshi Mizuno, 2000, J. Robotics Mechatronics.

Two-Axis Magnetic Suspension System with Dual Variable Flux-Path Units

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2011 .

10702 Compensation for Unbalance Using Exogenous Signal Synchronized with Rotation to a Rotary Gyro with Hybrid Suspension

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2014 .

Modeling and Validation of Vertical Direction Force Estimation with a Three-Dimensional Force Measurement Instrument Based on a Zero-Compliance Mechanism

Yuji Ishino, Masayuki Hara, Masaya Takasaki, 2019, Sensors.

Application of Frequency-Following Servocompensator to Unbalance Compensation in Gyro With Flexures Gimbal

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2016, IEEE/ASME Transactions on Mechatronics.

B14 Examination of Difference of Dummy Fingers for Tele-touch System

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2013 .

Electrostatic Suspension Using Variable Capacitors

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2009 .

Study on the controllability of double parallel magnetic suspension system considering magnetic polarity

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

Realization of self-sensing electrostatic suspension using a variable capacitor

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

Controllability of gyroscopic system from a viewpoint of parallel magnetic suspension

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2017, 2017 56th Annual Conference of the Society of Instrument and Control Engineers of Japan (SICE).

442 Development of Multiple Magnetic Suspension Systems : 2nd report: Controllability and Observability of Tandem-Type Multiple System

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2009 .

Development of a Flux- path Control Magnetic Suspension System with Multiple Magnetic Sources:1st Report,Development of a two-axis magnetic suspension system with a couple of variable flux-path units

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010 .

Mass Measurement System Using Relay Feedback with Hysteresis

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2008 .

Ultra Low-Velocity Control of a Surface Acoustic Wave Linear Motor

Yuji Ishino, Masaya Takasaki, Hiroyuki Kotani, 2008 .

Development of a three-axis active vibration isolation system using zero-power magnetic suspension

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2003, 42nd IEEE International Conference on Decision and Control (IEEE Cat. No.03CH37475).

A modified zero-power control and its application to vibration isolation system

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2012 .

Vibration Suppression in the Passively-Supported Direction by Varying Bias Currents in Magnetic Suspension System

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2018, 2018 European Control Conference (ECC).

1D25 Mass Measurement Using the Fixed-Point of a Spring-Mass System with a Dynamic Vibration Absorber and an Inertial-Mass Vibrator(The 12th International Conference on Motion and Vibration Control)

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2014 .

Improvement of vibration isolation characteristics by Kalman-filter estimated acceleration feedback

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2015, 2015 European Control Conference (ECC).

Basic Study on Microassembly Using Surface Tension (1st Report, Principle and Basic Experiments)

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2008 .

21413 Microforce Measurement Using a Zero-compliance Mechanism : 1st report: Fabrication of an Apparatus Using a Voice Coil Motor

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2013 .

Electromagnetic analysis in magnetic suspension mechanism of a wind tunnel for spinning body

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2016 .

Comparison of zero-power controllers in double parallel magnetic suspension system with parallel connected coils

Yuji Ishino, Masayuki Hara, Masaya Takasaki, 2015, 2015 10th Asian Control Conference (ASCC).

Study on self-sensing electrostatic suspension using a variable capacitor

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2010, 2010 11th IEEE International Workshop on Advanced Motion Control (AMC).

Series-Type Multiple Magnetic Suspension System

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2011 .

Proposal of Mass Estimation Regardless of Switching Position in a Relay Feedback Mass Measurement System

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2019, 2019 12th Asian Control Conference (ASCC).

Stabilization of Magnetic Suspension System by using First-Order-Reset Element without Derivative Feedback

Yuji Ishino, Masaya Takasaki, Takeshi Mizuno, 2019, 2019 12th Asian Control Conference (ASCC).

Mass estimation considering stiffness and fabrication of period measurement device in mass measurement using velocity-feedback relay control

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2021, Transactions of the JSME (in Japanese).

Improvement of Transient Characteristics of Negative Stiffness Control System by Feedforward Control

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2012 .

2A15 Zero-power control of parallel magnetic suspension systems

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2010 .

Pneumatic Active Vibration Isolation Systems Using Negative Stiffness

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2005 .

Lateral Vibration Suppression by Varying Stiffness Control in a Vertically Active Magnetic Suspension System

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2018 .

A Nonlinear Compensator of Zero-Power Magnetic Suspension for Zero-Compliance to Direct Disturbance

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2006 .

Force measurement using double series magnetic suspension

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2014 .

20917 Active Vibration Isolation System with an Active Dynamic Vibration Absorber : 5th report: Realization of Acceleration Feedback by Combining MEMS-Sensed Signal

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2014 .

Effect of Nonlinearity Caused by Friction on a Negative Stiffness Control System

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2014, IEEE Transactions on Control Systems Technology.

Realization of two-degree-of-freedom motions control using parallel magnetic suspension

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2017 .

Multiple Magnetic Suspension Systems:4th report:Realization of Parallel Magnetic Suspension with two floator

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2009 .

Mass Measurement Using a System Containing an On-Off Relay with Dead Zone

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2005 .

Flux Path Control Magnetic Suspension : 3rd report : Control of Lateral Motion

Yuji Ishino, Takeshi Mizuno, Hiroshi Hoshino, 2003 .

Fabrication of non-contact carrier system using solar magnetic suspension

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2015 .

ACTIVE VIBRATION ISOLATION SYSTEM USING AN ACTIVE DYNAMIC VIBRATION ABSORBER AS AN ACCELEROMETER

Yuji Ishino, Takeshi Mizuno, Toshiro Higuchi, 2002 .

Development of a totally active magnetically suspended gyro

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2014 .

Flux-Path Control Magnetic Suspension System Using Voice Coil Motors

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2007 .

3自由度アクティブ制御型磁気支持ジャイロの開発(機械力学,計測,自動制御)

Yuji Ishino, Yutaka Maruyama, Takeshi Mizuno, 2010 .

Development of a Rotary Gyro with Hybrid Suspension

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2015 .

Application of Unbalance Compensation to Totally Active Magnetically Suspended Gyro (特集 The 20th MAGDA Conference in Pacific Asia (MAGDA2011))

Yuji Ishino, Takeshi Mizuno, Masaya Takasaki, 2012 .