Yucan Fu

发表

Measurement-based geometric reconstruction for milling turbine blade using free-form deformation

Jun Wang, Xuan Liu, Zhengcai Zhao, 2017 .

Development of a novel supersonic grinding machine tool

Lu Yang, Yucan Fu, Jiuhua Xu, 2015 .

Workpiece surface quality and the influence factors when high-speed milling of SiCp/2009Al composite

Yucan Fu, Jiuhua Xu, Yingfei Ge, 2011, Other Conferences.

Investigation of Enhancing Heat Transfer in the Grinding Contact Zone Based on Heat Pipe

Yucan Fu, 2017 .

Predicting heat transfer of oscillating heat pipes for machining processes based on extreme gradient boosting algorithm

Ning Qian, Xuesong Wang, Zhengcai Zhao, 2020 .

Optimization design of grinding wheel topography for high efficiency grinding

Hong Jun Xu, Yucan Fu, Jiuhua Xu, 2002 .

Optimization for internal traverse grinding of valves based on wheel deflection

Hao Su, Wenfeng Ding, Yucan Fu, 2017 .

Microstructure and tribological property of self-lubrication CBN abrasive composites containing molybdenum disulfide

Biao Zhao, Wenfeng Ding, Yucan Fu, 2019 .

A novel single driven ultrasonic elliptical vibration cutting device

Hua Li, Yurong Chen, Zhen Yin, 2017 .

Measured data-driven shape-adaptive machining via spatial deformation of tool cutter positions

Zhengcai Zhao, Yucan Fu, Jiuhua Xu, 2019, Measurement.

Cold expansion technology of connection holes in aircraft structures: A review and prospect

Yucan Fu, Jiuhua Xu, Renzheng Li, 2015 .

Development of a Novel System for Adaptive Machining of Near-Net-Shape Components

Yucan Fu, Zhengcai Zhao, Shengtao Lin, 2021, Advances in Transdisciplinary Engineering.

Error Modeling and Path Planning for Freeform Surfaces by Laser Triangulation On-Machine Measurement

Yucan Fu, Taorui Xu, Chenwei Dai, 2021, IEEE Transactions on Instrumentation and Measurement.

Surface Quality and Geometric Accuracy Control of Fuel Nozzle Single-Pass Honing

Yucan Fu, Jiuhua Xu, Changyong Yang, 2021 .

Calibration and capability assessment of on-machine measurement by integrating a laser displacement sensor

Yucan Fu, Zhengcai Zhao, Dawei Ding, 2021, The International Journal of Advanced Manufacturing Technology.

Grinding behavior and surface appearance of (TiCp + TiBw)/Ti-6Al-4V titanium matrix composites

Biao Zhao, Wenfeng Ding, Yucan Fu, 2014 .

Grindability evaluation and tool wear during grinding of Ti2AlNb intermetallics

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2018 .

Quality prediction of plunger components based on the finite element method during the neck-spinning process

Yang Wang, Biao Zhao, Jianbo Dai, 2020 .

Fabrication and performance of porous metal-bonded CBN grinding wheels using alumina bubble particles as pore-forming agents

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2013 .

Fractal analysis of wear topography of brazed polycrystalline cBN abrasive grains during grinding nickel super alloy

Qing Miao, Wenfeng Ding, Yucan Fu, 2013 .

Investigation on stress distribution and wear behavior of brazed polycrystalline cubic boron nitride superabrasive grains: Numerical simulation and experimental study

Tianyu Yu, Wenfeng Ding, Yucan Fu, 2017 .

Wear evolution and stress distribution of single CBN superabrasive grain in high-speed grinding

Tianyu Yu, Wenfeng Ding, Yucan Fu, 2018, Precision Engineering.

Tool wear in turning of titanium alloy after thermohydrogen treatment

Yucan Fu, Jiuhua Xu, Weihua Wei, 2012 .

Influence of grain wear on material removal behavior during grinding nickel-based superalloy with a single diamond grain

Tianyu Yu, Wenfeng Ding, Yucan Fu, 2017 .

A new technology on enhancing heat transfer during grinding of titanium alloy

Yucan Fu, Jiuhua Xu, Jiu-hua Xu, 2010 .

Workpiece surface quality when ultra-precision turning of SiCp/Al composites

Yucan Fu, Jiuhua Xu, YongCheng Ge, 2008 .

Dry Grinding of Ti6Al4V Alloy with Flap Wheels

Yucan Fu, Jiuhua Xu, Wen-Guo Huo, 2010 .

Performance of micro-crystalline ceramic alumina wheels during creep feed grinding nickel-based superalloy

Zhengcai Zhao, Yucan Fu, Jiuhua Xu, 2014 .

CFRP grinding wheels for high speed and ultra-high speed grinding: A review of current technologies and research strategies

Chih-Hsing Chu, Yucan Fu, Jiu-Hua Xu, 2015 .

Grinding temperature during high-efficiency grinding Inconel 718 using porous CBN wheel with multilayer defined grain distribution

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2015 .

Wear behavior and mechanism of single-layer brazed CBN abrasive wheels during creep-feed grinding cast nickel-based superalloy

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2010 .

Tool wear in milling Ti40 burn-resistant titanium alloy using pneumatic mist jet impinging cooling

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2016 .

Review on monolayer CBN superabrasive wheels for grinding metallic materials

Barbara Linke, Wenfeng Ding, Yucan Fu, 2017 .

Structural design of a carbon fiber-reinforced polymer wheel for ultra-high speed grinding

Yucan Fu, Jiu-Hua Xu, Lu Yang, 2015 .

Grinding of brittle materials with brazed diamond grinding wheel

Yucan Fu, Yucan Fu, Bei Zhang, 2013 .

Experimental studies on drilling tool load and machining quality of C/SiC composites in rotary ultrasonic machining

Kai Ding, Yucan Fu, Su Honghua, 2014 .

The influence of speed on material removal mechanism in high speed grinding with single grit

Wenfeng Ding, Yucan Fu, Jiuhua Xu, 2015 .

Experimental studies on matching performance of grinding and vibration parameters in ultrasonic assisted grinding of SiC ceramics

Kai Ding, Yucan Fu, Yucan Fu, 2017 .

Deformation analysis and error prediction in machining of thin-walled honeycomb-core sandwich structural parts

Zhengcai Zhao, Yucan Fu, Jiuhua Xu, 2018 .

Wear of diamond grinding wheel in ultrasonic vibration-assisted grinding of silicon carbide

Kai Ding, Yucan Fu, Keqin Wu, 2014 .

Grinding performance of textured monolayer CBN wheels: Undeformed chip thickness nonuniformity modeling and ground surface topography prediction

Tianyu Yu, Wenfeng Ding, Yucan Fu, 2017 .

Investigation of a heat pipe cooling system in high-efficiency grinding

Ke Ma, Qingshan He, Yucan Fu, 2014 .

Machinability of damage-tolerant titanium alloy in orthogonal turn-milling

Yucan Fu, Lu-fang Qin, Yucan Fu, 2020, Frontiers of Mechanical Engineering.

Experimental study on turning of TC9 titanium alloy with cold water mist jet cooling

Yucan Fu, Jiuhua Xu, Jiu-hua Xu, 2011 .

Tool wear prediction of machining hydrogenated titanium alloy Ti6Al4V with uncoated carbide tools

Yucan Fu, Jiuhua Xu, Shubao Yang, 2013 .