Eiki Okuyama

发表

Roundness measurement and the radial motion measurement based on the 3-point method using the inverse filtering

Eiki Okuyama, 2000, Optics and Optoelectronic Inspection and Control.

Elimination of Gyro Drift by Using Reversal Measurement

Eiki Okuyama, Tsuyoshi Suwada, Kazuro Furukawa, 2015, Int. J. Autom. Technol..

714 Straiqhtness evaluation for the objects longer than 100 m using precise inclinometers

Eiki Okuyama, Tsuyoshi Suwada, Masanori Sato, 2013 .

Large-scale accelerator alignment using an inclinometer

Eiki Okuyama, Tsuyoshi Suwada, Masanori Satoh, 2013 .

Multi-probe method for straightness profile measurement based on least uncertainty propagation (2nd report)—Two-point method considering cross-axis translational motion, pitch motion and sensor's random error

Eiki Okuyama, Hirotake Akata, Hiromi Ishikawa, 2010 .

Straightness evaluation using inclinometers with a pair of offset bars

Eiki Okuyama, Tsuyoshi Suwada, Kazuro Furukawa, 2015 .

Angle Detection Using Gyro Signals Rotating Around Four Orthogonally Aligned Axes

Eiki Okuyama, Tsuyoshi Suwada, Masanori Satoh, 2020, Int. J. Autom. Technol..

Effects of Difference in Spatial Frequency Response of Sensors When Measuring Straightness Using Multiple Sensors.

Eiki Okuyama, Satoshi Kiyono, Hitoshi Moritoki, 1994 .

Development of a Surface Roughness Measurement System in a Narrow Borehole

Eiki Okuyama, Yuichi Suzuki, Yuma Suzuki, 2016, Int. J. Autom. Technol..

Multi-probe method for straightness profile measurement based on least uncertainty propagation (1st report)

Eiki Okuyama, 2010 .

Angle Detection Using a Continuously Rotating Gyro for Large Scale Profile Evaluation - Reversal Measurement for Eliminating Gyro Drift -

Eiki Okuyama, Tsuyoshi Suwada, Kazuro Furukawa, 2018, Int. J. Autom. Technol..

Surface Profile Measurement Based on the Concept of Multi-Step Division of Length

Eiki Okuyama, Hiromi Ishikawa, Kohei Konda, 2017, Int. J. Autom. Technol..

ハニカム構造を利用した変位増幅圧電アクチュエータ(GS8 マイクロ/ナノ試験・薄膜)

Eiki Okuyama, Kazuaki Miyanaga, Hideyuki Okamoto, 2004 .

Software Datum Design for Cross-Axis Motion Measurement of X-Stage Based on Least Uncertainty Criterion

Hiroshi Takahashi, Eiki Okuyama, Hiromi Ishikawa, 2011, Int. J. Autom. Technol..

Generalized Two-Point Method Using Inverse Filtering for Surface Profile Measurement - Theoretical Analysis and Experimental Results for Error Propagation -

Eiki Okuyama, Hiromi Ishikawa, 2014, Int. J. Autom. Technol..

A Circular Profile Measurement Method Using Software Techniques

Kimiyuki Mitsui, Eiki Okuyama, 2005 .

Influence of the Difference of Characteristics between Sensors to the Roundness Measurement Based on 3-point Method.

Eiki Okuyama, Hitoshi Moritoki, 1999 .

Spindle Error Motion Measurement Using Concentric Circle Grating and Phase Modulation Interferometers

Eiki Okuyama, Masato Aketagawa, Muhummad Madden, 2013, Int. J. Autom. Technol..

Self-zero-adjustment of probes in the methods constructing software datum for large profile measurement

Wei Gao, Ichiro Ogura, Eiki Okuyama, 1996 .

Radial motion measurement of a high-revolution spindle motor

Eiki Okuyama, Jun Aoki, Nayu Nosaka, 2007 .

312 Software datum for straightness porfile measurement based on least uncertainty criterion

Eiki Okuyama, Yuji Takano, 2010 .

Spindle error motion measurement using concentric circle grating and phase modulation interferometers

Eiki Okuyama, Masato Aketagawa, Yoshitaka Maeda, 2012, Photonics Asia.

A Study on the Roundness Measurement and the Radial Motion Measurement based on the 3-point Method.

Eiki Okuyama, Hitoshi Moritoki, 1999 .

A two-dimensional atom encoder using one lateral-dithered scanning tunneling microscope (STM) tip and a regular crystalline lattice

Eiki Okuyama, Masato Aketagawa, M. Aketagawa, 2009 .

Innverse Matrix Method for the Roundness Measurement and the Radial Motion Measurement based on the 3-point Method.

Eiki Okuyama, 2001 .

Investigation of an optical noncontact gear geometry measurement system: measurement of pitch errors and tooth profiles

Eiki Okuyama, Satoshi Kiyono, Hitoshi Moritoki, 1994 .

New analytical method for V-block three-point method

Kimiyuki Mitsui, Eiki Okuyama, Kenji Goho, 2003 .

Study on measurement of surface undulation. (2nd report). Feature measurement and digital filter.

Eiki Okuyama, Satoshi Kiyono, Masaomi Sumita, 1988 .

Absolute Profile-Measurement Using Software Datum.

Eiki Okuyama, Wei Gao, Satoshi Kiyono, 1994 .