A. V. Dedov

发表

The experimental determination of the coefficient of hydraulic resistance of a perforated plate with a layer of balls adjoining to it

Yu. V. Smorchkova, A. N. Varava, A. V. Dedov, 2017 .

Studying heat transfer during impulse heating of model fragments of fuel rod claddings

A. N. Varava, A. V. Dedov, A. T. Komov, 2011 .

Experimental investigation of heat transfer efficiency on the convex surface of the annular channel of varying geometry intensifiers

A. V. Dedov, A V Zakharenkov, A. T. Komov, 2016 .

A Review of Modern Methods for Enhancing Nucleate Boiling Heat Transfer

A. V. Dedov, 2019, Thermal Engineering.

The Plasma-Facing Materials of Tokamak Thermonuclear Reactors: Requirements, Thermal Stabilization, and Tests (a Review)

A. V. Dedov, G. Van Oost, V. P. Budaev, 2021, Thermal Engineering.

Tests of tungsten divertor mock-ups of tokamak-reactor with powerful plasma and e-beam loads

A. V. Dedov, G. Oost, G. Van Oost, 2019, Journal of Physics: Conference Series.

Critical heat flux at flow boiling of refrigerants in minichannels at high reduced pressure

A. V. Dedov, A. Belyaev, A. Komov, 2018, International Journal of Heat and Mass Transfer.

Peculiarities of boiling in subcooled flow

A. V. Dedov, 2009 .

Hydrodynamics and heat transfer in swirl flow under conditions of one-side heating. Part 2: Boiling heat transfer. Critical heat fluxes

A. V. Dedov, V. Yagov, A. Komov, 2010 .

Critical heat flowrates in subcooled flow boiling

A. V. Dedov, 2010 .

Effect of Coating by a Carbon Nanostructure on Heat Transfer with Unsteady Film Boiling

A. V. Dedov, A. Sliva, V. Yagov, 2019, High Temperature.

Experimental study of fluid dynamics in the pebble bed in a radial coolant flow

A. V. Dedov, A. Komov, A. Varava, 2016 .

An experimental study of flow boiling in minichannels at high reduced pressure

A. V. Dedov, A. Belyaev, A. Komov, 2017 .

Hydrodynamics and Heat Transfer in the Case of Combined Flow in a Annular Channel of Small Cross Section

A. V. Dedov, A. Komov, A. V. Zakharenkov, 2017 .

Investigation of heat transfer and pressure drop in an annular channel with heat transfer intensifiers

A. V. Dedov, A. Komov, A. V. Zakharenkov, 2015 .

Hydrodynamics and heat transfer in swirl flow under conditions of one-side heating. Part 1: Pressure drop and single-phase heat transfer

A. V. Dedov, V. V. Yagov, A. T. Komov, 2010 .

Study of heat exchange and hydrodynamics on the model of fuel assembly with microfuels

A. V. Dedov, S. Mirnov, A. Komov, 2020, Journal of Physics: Conference Series.

Verification of the Mathematical Model and Numerical Investigation into the Thermal–Hydraulic Parameters of Fuel Assemblies Containing Microspherical Fuel Elements

A. V. Dedov, A. Komov, A. Varava, 2018, Thermal Engineering.

Cooling of the inner-chamber elements of a thermonuclear reactor with a dispersed flow

A. V. Dedov, S. Mirnov, A. Vertkov, 2019, Journal of Physics: Conference Series.

Study of pressure drop and heat transfer in a swirl flow with one-sided heating in a range of heat flowrates below boiling crisis

A. V. Dedov, V. Yagov, A. Komov, 2009 .

Method of adiabatic cross-section and its application for estimating the thermophysical and thermostrength parameters of high density beam dumps in the iter injection system

A. V. Dedov, A. Panasenkov, A. Komov, 1999 .

Investigation into the efficiency of a fin and wound wire intensifier

A. V. Dedov, A. Komov, A. V. Zakharenkov, 2017, Thermal Engineering.

Investigation into the efficiency of a fin and wound wire intensifier

A. N. Varava, A. V. Dedov, A V Zakharenkov, 2017 .

The study of the temperature field in pebble beds with volumetric heating and radial flow of coolant

A. V. Dedov, A. Komov, A. V. Zakharenkov, 2019, IOP Conference Series: Earth and Environmental Science.

Influence of carbon coating and oxide layer on film boiling regime

A. V. Dedov, A. Sliva, M. Vinogradov, 2018 .

Heat transfer under conditions of film boiling in turbulent flow of subcooled liquid

A. V. Dedov, V. Yagov, 2009 .

Study of Nucleate Pool Boiling Heat Transfer Enhancement on Surfaces Modified by Beam Technologies

A. V. Dedov, S. Fedorovich, I. A. Khaziev, 2021, Heat Transfer Engineering.

Enhancing the boiling heat transfer

A. V. Dedov, 2018, Journal of Physics: Conference Series.

Phase Change Materials and Power Engineering

A. V. Dedov, I. S. Grigor’ev, A. Eletskii, 2021, Thermal Engineering.

Assessment of radiation damage of the first wall of a fusion neutron source DEMO-FNS with a blanket for the transmutation of minor actinides

A. V. Dedov, V. Budaev, B. Kuteev, 2021, Nuclear Fusion.

Analysis of the Efficiency of Static Mixers from Fragments of Twisted Tape and with Leaf Elements for Mixing Fuel Gas Components

A. V. Dedov, V. I. Artemov, G. Yankov, 2023, Thermal Engineering.

Simulation of Mixing of Single-Phase Fluids in T-Junctions

A. V. Dedov, V. I. Artemov, G. G. Yan’kov, 2023, Thermal Engineering.

Studying in-vessel component materials under heat and plasma loads relevant to fusion installations

A. V. Dedov, V. Budaev, A. Karpov, 2020, Journal of Physics: Conference Series.

Features of heat transfer with cooling by dispersed flow

A. V. Dedov, S. Mirnov, A. Vertkov, 2019, Journal of Physics: Conference Series.

HEAT AND MASS TRANSFER AND PROPERTIES OF WORKING FLUIDS AND MATERIALS The Plasma-Facing Materials of Tokamak Thermonuclear Reactors: Requirements, Thermal Stabilization, and Tests (a Review)

A. V. Dedov, G. Oost, V. P. Budaev, 2020 .

A Review of Modern Methods for Enhancing Nucleate Boiling Heat Transfer

A. V. Dedov, 2019, Thermal Engineering.