J. Buffière

发表

X‐ray tomographic imaging of Ti/SiC composites

M. Preuss, P. Withers, E. Maire, 2003, Journal of microscopy.

In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics

E. Maire, E. Boller, J. Adrien, 2010 .

Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis.

J. Buffière, W. Ludwig, A. King, 2009, The Review of scientific instruments.

Digital volume correlation analyses of synchrotron tomographic images

Stéphane Roux, François Hild, Julien Réthoré, 2011 .

Damage Investigation in A319 Aluminium Alloy by X‐ray Tomography and Digital Volume Correlation during In Situ High‐Temperature Fatigue Tests

Jean-François Witz, Eric Charkaluk, Rian Seghir, 2016 .

Analysis and Artifact Correction for Volume Correlation Measurements Using Tomographic Images from a Laboratory X-ray Source

J. Réthoré, S. Roux, J. Adrien, 2011 .

X-Ray Micro-Tomography Coupled to the Extended Finite Element Method to Investigate Microstructurally Short Fatigue Cracks

W. Ludwig, E. Ferrié, A. Gravouil, 2007 .

Non Destructive Three Dimensional Imaging of Aluminium Alloys

P. Cloetens, E. Maire, W. Ludwig, 2006 .

3D Visualisation of Short Crack Propagation in Al Alloy Using High Resolution Synchrotron X-Ray Microtomography

W. Ludwig, E. Ferrié, J. Buffiere, 2005 .

Characterisation and Modelling of the Three Dimensional Propagation of Short Fatigue Cracks

J. Buffière, W. Ludwig, E. Ferrié, 2006 .

Investigation of Wrinkle Artifacts Along Metallic Fatigue Cracks in Phase Contrast Synchrotron Tomography Via Simulations and Experiments

J. Létang, W. Ludwig, Ce Xiao, 2022, SSRN Electronic Journal.

Characterization of internal fatigue cracks in aluminum alloys by simulation of phase contrast tomography

J. Létang, Ce Xiao, J. Buffiere, 2021, Scientific Reports.

3D characterization of closure of surface and internal fatigue cracks in nodular cast iron using Digital Volume Correlation of laboratory X-ray tomography images

J. Lachambre, Jérôme Adrien, J. Buffière, 2024, International Journal of Fatigue.

Investigation of Fatigue Crack Propagation in Nickel Superalloy Using Diffraction Contrast Tomography and Phase Contrast Tomography

J. Lachambre, A. King, O. Messé, 2014 .

Modelling the fretting fatigue crack growth: From short crack correction strategies to microstructural approaches

S. Fouvry, M. Brochu, J. Buffiere, 2018, International Journal of Fatigue.

Characterisation of 3D strain heterogeneity at the microstructure scale during Low Cycle Fatigue of an AlSi7Cu3Mg alloy at 250°C

E. Charkaluk, Long Wang, J. Witz, 2022, International Journal of Fatigue.

Environment effect on internal fatigue crack propagation studied with in-situ X-ray microtomography

N. Ranc, A. Weck, M. Majkut, 2023, Materials Science and Engineering: A.

Alpha-case promotes fatigue cracks initiation from the surface in heat treated Ti-6Al-4V fabricated by Laser Powder Bed Fusion

R. Dendievel, J. Buffière, Quentin Gaillard, 2022, International Journal of Fatigue.

Deformation mechanisms at the tip of internal fatigue cracks in vacuum and in the presence of an air environment in a Ti alloy

Louis Hébrard, J. Buffière, Sylvain Dancette, 2024, International Journal of Fatigue.