T. K. Kundra

发表

Damped model updating using complex updating parameters

Vikas Arora, Satinder Singh, T. K. Kundra, 2009 .

Multi-Response Optimization of Fused Deposition Modelling Process Parameters of ABS Using Response Surface Methodology (RSM)-Based Desirability Analysis

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2017 .

Further experience with model updating incorporating damping matrices

Vikas Arora, Satinder Singh, T. K. Kundra, 2010 .

Damped FE model updating using complex updating parameters: Its use for dynamic design

Vikas Arora, Satinder Singh, T. K. Kundra, 2009 .

Additive Manufacturing Technologies

T. K. Kundra, Arshad Noor Siddiquee, Manu Srivastava, 2018 .

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

T. K. Kundra, J. R Jain, J. Jain, 2004 .

Modal identification of dynamic mechanical systems

T. K. Kundra, Rajesh Kumar Srivastava, 1992 .

Comparative study of model updating methods using simulated experimental data

T. K. Kundra, B. C. Nakra, S. V. Modak, 2002 .

A Dynamic Design Model for Teaching

T. K. Kundra, T. Kundra, 2011 .

NATURAL FREQUENCY CONSTRAINED OPTIMAL STRUCTURAL MODIFICATION USING A SENSITIVITY DERIVATIVE OF DYNAMICALLY CONSTRAINED MASS AND STIFFNESS MATRICES

T. K. Kundra, R. K. Srivastava, 1998 .

Harmonics elimination algorithm for operational modal analysis using random decrement technique

T. K. Kundra, S. V. Modak, Chetan Rawal, 2010 .

Model Updating Studies on a Two Wheeler Chassis

T. K. Kundra, Sandeep Kumar, S. V. Modak, 2007 .

Use of an updated finite element model for dynamic design

T. K. Kundra, B. C. Nakra, S. V. Modak, 2002 .

Multi-objective optimisation of fused deposition modelling process parameters using RSM and fuzzy logic for build time and support material

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2018 .

Structural dynamic modifications via models

T. K. Kundra, 2000 .

Studies in dynamic design of drilling machine using updated finite element models

T. K. Kundra, B. C. Nakra, A. K. Gupta, 2004 .

Die-Casting Feature Recognition for Automated Parting Direction and Parting Line Determination

T. K. Kundra, Jatinder Madan, P. V. M. Rao, 2007, J. Comput. Inf. Sci. Eng..

Estimation of the Effect of Process Parameters on Build Time and Model Material Volume for FDM Process Optimization by Response Surface Methodology and Grey Relational Analysis

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2017 .

Experimental Investigation of Process Parameters for Build Time Estimation in FDM Process Using RSM Technique

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2016 .

An Integrated RSM-GA Based Approach for Multi Response Optimization of FDM Process Parameters for Pyramidal ABS Primitives

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2016 .

Applications and Challenges of Friction Based Additive Manufacturing Technologies

T. K. Kundra, Arshad Noor Siddiquee, Manu Srivastava, 2018 .

System for early cost estimation of die-cast parts

T. K. Kundra, Jatinder Madan, P. V. M. Rao, 2007 .

Integration of Fuzzy Logic with Response Surface Methodology for Predicting the Effect of Process Parameters on Build Time and Model Material Volume in FDM Process

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2016 .

Finite Element Model Updating and Dynamic Design of Spot Welded Structures

T. K. Kundra, S. V. Modak, M. K. Choudhury, 2011 .

Computer Aided Manufacturability Analysis of Die-cast Parts

T. K. Kundra, Jatinder Madan, P. V. M. Rao, 2007 .

Model updating using constrained optimization

T. K. Kundra, B. C. Nakra, S. V. Modak, 2000 .

Estimating percentage contribution of process parameters towards build time of FDM process for components displaying spatial symmetry: a case study

T. K. Kundra, Manu Srivastava, Sandeep Rathee, 2019 .

Optimal-parting direction selection for die-casting

T. K. Kundra, Jatinder Madan, P. V. M. Rao, 2009, Int. J. Manuf. Technol. Manag..

Finite element analysis of misaligned rotors on oil-film bearings

T. K. Kundra, J. K. Dutt, J. K. Dutt, 2010 .

Genetic algorithms for optimal structural dynamic modification

T. K. Kundra, V. P. Dutta, S. Mukherjee, 2001 .

General Introduction and Need of Friction Based Additive Manufacturing Techniques

T. K. Kundra, Arshad Noor Siddiquee, Manu Srivastava, 2018 .

A response re-analysis of damped beams using eigenparameter perturbation

T. K. Kundra, B. C. Nakra, S.S.A. Ravi, 1995 .

Mathematical modelling using harmonic excitation data

T. K. Kundra, B. C. Nakra, 1984 .

A Review on Recent Progress in Solid State Friction Based Metal Additive Manufacturing: Friction Stir Additive Techniques

T. K. Kundra, Manu Srivastava, Sandeep Rathee, 2018, Critical Reviews in Solid State and Materials Sciences.

PREDICTION OF DYNAMIC CHARACTERISTICS USING UPDATED FINITE ELEMENT MODELS

T. K. Kundra, B. C. Nakra, S. V. Modak, 2002 .

Finite element model updating with damping identification

Vikas Arora, T. K. Kundra, S. Singh, 2009 .

Additive Manufacturing Applications

T. K. Kundra, Manu Srivastava, Sandeep Rathee, 2019, Additive Manufacturing.

Virtual Modelling and Simulation of Functionally Graded Material Component using FDM Technique

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2015 .

Studies in dynamic design using updated models

T. K. Kundra, B. C. Nakra, S. V. Modak, 2005 .

Virtual Design, Modelling and Analysis of Functionally graded materials by Fused Deposition Modeling

T. K. Kundra, Manu Srivastava, Sandeep Rathee, 2016 .

Additive Manufacturing Processes

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2019, Additive Manufacturing.

Comparative study of damped FE model updating methods

Vikas Arora, T. K. Kundra, S. Singh, 2009 .