Mohamed A. Abdou

发表

A cascaded fuzzy-LOPA risk assessment model applied in natural gas industry

M. Khalil, Mohamed A. Abdou, M. S. Mansour, 2012 .

Exploring novel high power density concepts for attractive fusion systems

Mohamed A. Abdou, M. Abdou, 1999 .

Overview of IFE chamber and target technologies R&D in the U.S.

Wayne R. Meier, Ralph W. Moir, Gerald L. Kulcinski, 2000 .

Required Momentum, Heat, and Mass Transport Experiments for Liquid Metal Blankets

Mohamed A. Abdou, D. K. Sze, Mark S. Tillack, 1986 .

Research and development assessments for Prometheus heavy ion and laser driven inertial fusion energy reactor designs

Mark S. Tillack, Mohamed A. Abdou, Nasr M. Ghoniem, 1993, 15th IEEE/NPSS Symposium. Fusion Engineering.

Normal operation and maintenance safety lessons from the ITER US PbLi test blanket module program for a US FNSF and DEMO

Neil B. Morley, Mohamed A. Abdou, Lee C. Cadwallader, 2014 .

Tritium analysis of a water-cooled solid breeder blanket for ITER

A. R. Raffray, Mohamed A. Abdou, G. Federici, 1989, IEEE Thirteenth Symposium on Fusion Engineering.

Impact of technology and maintainability on economic aspects of tokamak power plants

C. B. Dennis, Mohamed A. Abdou, R. G. Clemmer, 1979 .

Computational model for superconducting toroidal-field magnets for a tokamak reactor

Mohamed A. Abdou, Larry Turner, 1977 .

The use of MNCP for neutronics calculations within large buildings of fusion facilities

Mohamed A. Abdou, Mahmoud Z. Youssef, J. E. Eggleston, 1998 .

Development of advanced blanket performance under irradiation and system integration through JUPITER-II project

Neil B. Morley, Steven J. Zinkle, Mohamed A. Abdou, 2008 .

Capitalizing on the ITER Opportunity - an ITER-TBM Experimental Thrust

Neil B. Morley, Mohamed A. Abdou, C.P.C. Wong, 2009 .

CURRENT APPROACHES TO MODELING MHD FLOWS IN THE DUAL COOLANT LEAD LITHIUM BLANKET

Ramakanth Munipalli, Neil B. Morley, Mohamed A. Abdou, 2006 .

Physical Model Development and Benchmarking for MHD Flows in Blanket Design

Ramakanth Munipalli, Neil B. Morley, Mohamed A. Abdou, 2008 .

Issues and Test Requirements in Radiation Shielding of Fusion Reactors

Masayuki Nakagawa, Mohamed A. Abdou, 1986 .

ICONE15-10497 Numerical Investigation of Flow Characteristics in a Prototypical Lower Plenum of a Prismatic VHTR

Mohamed A. Abdou, Peter Tsai, Alice Ying, 2007 .

STARFIRE, a commercial tokamak power plant design

H. C. Stevens, Richard F. Mattas, Mohamed A. Abdou, 1981 .

A volumetric neutron source for fusion nuclear technology testing and development

Mohamed A. Abdou, M. Abdou, 1995 .

APEX and ALPS, high power density technology programs in the U.S.

Mohamed A. Abdou, C.P.C. Wong, S. Berk, 1999 .

OVERVIEW OF FUSION BLANKET R&D IN THE US OVER THE LAST DECADE

Alice Ying, P. Calderoni, Neil B. Morley, 2005 .

Requirements and Design Envelope for Volumetric Neutron Source Fusion Facilities for Fusion Nuclear Technology Development

Mohamed A. Abdou, Yueng Kay Martin Peng, 1995 .

EXPERIMENTAL STUDY OF MHD FLOWS IN A PROTOTYPIC INLET MANIFOLD SECTION OF THE DCLL TEST BLANKET MODULE

Mohamed A. Abdou, K. Messadek, 2009 .

Kerma factor evaluation and its application in nuclear heating experiment analysis

Li Zhang, Mohamed A. Abdou, 1997 .

The Prometheus IFE reactor cavity

Mark S. Tillack, A. R. Raffray, Mohamed A. Abdou, 1993, 15th IEEE/NPSS Symposium. Fusion Engineering.

Impact of material system thermomechanics and thermofluid performance on He-cooled ceramic breeder blanket designs with SiCf/SiC

Mohamed A. Abdou, Akira Kohyama, Akihiko Shimizu, 2004 .

Shielding and maintainability in an experimental tokamak

Mohamed A. Abdou, E. R. Hager, W. F. Vogelsang, 1979 .

Application of reliability analysis method to fusion component testing

Mohamed A. Abdou, Alice Y. Ying, A. Ying, 1995 .

Fusion Integral Experiments and Analysis and the Determination of Design Safety Factors — II: Application to the Prediction Uncertainty of Tritium Production Rate from the U.S. DOE/JAERI Collaborative Program on Fusion Blanket Neutronics

Hiroshi Maekawa, Mohamed A. Abdou, Chikara Konno, 1995 .

Solid breeder thermal transient under purge-line-break accidents

Mohamed A. Abdou, Alice Y. Ying, 1994 .

Progress in lattice Boltzmann methods for magnetohydrodynamic flows relevant to fusion applications

Neil B. Morley, Mohamed A. Abdou, Martin J. Pattison, 2008 .

PROMETHEUS DESIGNS FOR LASER-DRIVEN AND HEAVY-ION-DRIVEN FUSION REACTORS

Mohamed A. Abdou, Lester Waganer, 1993 .

Modeling of liquid walls in APEX study

Neil B. Morley, Mohamed A. Abdou, Shin-ichi Satake, 2002 .

Influence of 2D and 3D convection–diffusion flow on tritium permeation in helium cooled solid breeder blanket units

Alice Ying, Ming-Jiu Ni, Mohamed A. Abdou, 2006 .

Effect of initial turbulence intensity and velocity profile on liquid jets for IFE beamline protection

Neil B. Morley, Mohamed A. Abdou, A. I. Konkachbaev, 2002 .

Operating and Geometrical Arrangement Requirements for Fusion Neutronics Testing

Mohamed A. Abdou, Mahmoud Z. Youssef, Yukio Oyama, 1985 .

MHD simulations of liquid metal flow through a toroidally oriented manifold

Ramakanth Munipalli, Ming-Jiu Ni, Neil B. Morley, 2008 .

Physics and technology conditions for attaining tritium self-sufficiency for the DT fuel cycle

Mohamed A. Abdou, Mohamed E. Sawan, M. Abdou, 2006 .

An overview of the US DCLL ITER-TBM program

Alice Ying, Neil B. Morley, Mohamed A. Abdou, 2010 .

Uncertainties in Prediction of Tritium Breeding in Candidate Blanket Designs Due to Present Uncertainties in Nuclear Data Base

Mohamed A. Abdou, M. Z. Youssef, M. Abdou, 1986 .

Direct nuclear heating measurements in fusion neutron environment and analysis

Mohamed A. Abdou, Chikara Konno, Mahmoud Z. Youssef, 1991 .

Benefits of natural convection in solid breeder blankets with poloidal coolant channels under LOFA conditions

Mohamed A. Abdou, Alice Y. Ying, A. Ying, 1991 .

Neutronics tests in a fusion engineering facility

Mohamed A. Abdou, M. Z. Youssef, 1989 .

Dual-coolant lead–lithium (DCLL) blanket status and R&D needs

Neil B. Morley, Mohamed A. Abdou, Siegfried Malang, 2015 .

Validation strategies of HIMAG in interfacial flow computation for fusion applications

Ramakanth Munipalli, Ming-Jiu Ni, Neil B. Morley, 2006 .

Radiation considerations for superconducting fusion magnets

Mohamed A. Abdou, M. Abdou, 1978 .

Results of systems studies for the STARFIRE commercial tokamak

Mohamed A. Abdou, David A. Ehst, Lester Waganer, 1979 .

Numerical analysis of MHD flow and heat transfer in a poloidal channel of the DCLL blanket with a SiCf/SiC flow channel insert

Neil B. Morley, Mohamed A. Abdou, Siegfried Malang, 2006 .

Characterization of the effect of Froude number on surface waves and heat transfer in inclined turbulent open channel water flows

Neil B. Morley, Mohamed A. Abdou, Sergey Smolentsev, 2003 .

A Tokamak Experimental Power Reactor

H. C. Stevens, V. A. Maroni, J. S. Patten, 1976 .

Benchmarking FENDL libraries through analysis of bulk shielding experiments on large SS316 assemblies for verification of ITER shielding characteristics

Hiroshi Maekawa, Mohamed A. Abdou, Yujiro Ikeda, 1996 .

Numerical study of MHD effect on liquid metal free jet under complex magnetic fields

Alice Ying, Mohamed A. Abdou, Xiao-Yong Luo, 2006 .

Effect of a magnetic field on stability and transitions in liquid breeder flows in a blanket

Mohamed A. Abdou, Sergey Smolentsev, M. Abdou, 2013 .

Development of PIV Technique under Magnetic Fields and Measurement of Turbulent Pipe Flow of Flibe Simulant Fluid

Neil B. Morley, Mohamed A. Abdou, Shin-ichi Satake, 2007 .

On the flow past a magnetic obstacle

Mohamed A. Abdou, Sergio Cuevas, Sergey Smolentsev, 2006, Journal of Fluid Mechanics.

Description of a Facility for Vapor Clearing Rates Studies of IFE Reactors Flibe Liquid Chambers

Alice Ying, T. Sketchley, Mohamed A. Abdou, 2001 .

Exploring liquid metal plasma facing component (PFC) concepts—Liquid metal film flow behavior under fusion relevant magnetic fields

Ming-Jiu Ni, Neil B. Morley, Mohamed A. Abdou, 2006 .

A NEW APPROACH AND COMPUTATIONAL ALGORITHM FOR SENSITIVITY/UNCERTAINTY ANALYSIS FOR SED AND SAD WITH APPLICATION TO BERYLLIUM INTEGRAL EXPERIMENTS

Mohamed A. Abdou, Mahmoud Z. Youssef, M. Abdou, 1993 .

Tritium Transport in Poloidal Flows of a DCLL Blanket

Ramakanth Munipalli, Mohamed A. Abdou, Sergey Smolentsev, 2011 .

Application of discrete element method to study mechanical behaviors of ceramic breeder pebble beds

Alice Ying, Mohamed A. Abdou, Zhiyong An, 2007 .

Experimental evaluation of the interface heat conductance between roughened beryllium and stainless steel surfaces

Mohamed A. Abdou, Robert Dean Abelson, R. Abelson, 1996 .

Overview of the latest experiments under the JAERI/USDOE collaborative program on fusion neutronics

Hiroshi Maekawa, Mohamed A. Abdou, M. Abdou, 1991 .

Thermofluid modeling and experiments for free surface flows of low-conductivity fluid in fusion systems

Neil B. Morley, Mohamed A. Abdou, Jean-Christophe Nave, 2004 .

Modifying Young's modulus in DEM simulations based on distributions of experimental measurements

Alice Ying, Mohamed A. Abdou, Jon T. Van Lew, 2015 .

Impact of Pressure Equalization Slot in Flow Channel Insert on Tritium Transport in a DCLL-Type Poloidal Duct

Mohamed A. Abdou, Alice Y. Ying, Hongjie Zhang, 2013 .

Characterization of key magnetohydrodynamic phenomena in PbLi flows for the US DCLL blanket

Mohamed A. Abdou, Sergey Smolentsev, Rene Moreau, 2008 .

Fission reactor experiments for solid breeder blankets

Mohamed A. Abdou, P. Gierszewski, M. Abdou, 1986 .

Measurement and Analysis of Nuclear Heat Depositions in Structural Materials Induced by D-T Neutrons

Hiroshi Maekawa, Mohamed A. Abdou, Chikara Konno, 1992 .

A fusion nuclear science facility for a fast-track path to DEMO

Alice Ying, G. A. Navratil, Neil B. Morley, 2014 .

Vapor condensation study for HIF liquid chambers

P. Calderoni, T. Sketchley, Mohamed A. Abdou, 2005 .

Comparative study of radioactivity and afterheat in several fusion reactor blanket designs

R. W. Conn, Mohamed A. Abdou, T. Y. Sung, 1975 .

Code development for analysis of MHD pressure drop reduction in a liquid metal blanket using insulation technique based on a fully developed flow model

Neil B. Morley, Mohamed A. Abdou, Sergey Smolentsev, 2005 .

Numerical modeling of first experiments on PbLi MHD flows in a rectangular duct with foam-based SiC flow channel insert

T. Sketchley, Mohamed A. Abdou, Sergey Smolentsev, 2016 .

Solid breeder test blanket module design and analysis

P. Calderoni, Mohamed A. Abdou, Susana Reyes, 2006 .

A Helium-Cooled Solid Breeder Concept for the Tritium-Producing Blanket of the International Thermonuclear Experimental Reactor

Mark S. Tillack, Mohamed A. Abdou, Mahmoud Z. Youssef, 1989 .

Breeder and test blankets in ITER

G. Simbolotti, Mohamed A. Abdou, Yousry Gohar, 1991 .

Experimental study of the interaction of ceramic breeder pebble beds with structural materials under thermo-mechanical loads

P. Calderoni, T. Sketchley, Mohamed A. Abdou, 2006 .

Status of "TITAN" Task 1-3 "Flow Control and Thermofluid Modeling"

T. Sketchley, Neil B. Morley, Mohamed A. Abdou, 2012 .

Novel liquid blanket configurations and their hydrodynamic analyses for innovative confinement concepts

Ralph W. Moir, Neil B. Morley, Mohamed A. Abdou, 2000 .

A Comparative Study of Several Fusion Reactor Blanket Designs

Mohamed A. Abdou, M. Abdou, R. Conn, 1974 .

MHD and heat transfer considerations for the US DCLL blanket for DEMO and ITER TBM

Neil B. Morley, Mohamed A. Abdou, Clement Wong, 2008 .

An overview of dual coolant Pb–17Li breeder first wall and blanket concept development for the US ITER-TBM design

Steven J. Zinkle, Neil B. Morley, Mohamed A. Abdou, 2006 .

Results of an International Study on a High-Volume Plasma-Based Neutron Source for Fusion Blanket Development

Alice Ying, Mohamed A. Abdou, John D Galambos, 1996 .

High-Heat-Flux Removal by Phase-Change Fluid and Particulate Flow

Mohamed A. Abdou, A. René Raffray, Z. Gorbis, 1993 .

Assessment of dose rate profiles and accessibility inside the building of the experimental fusion reactor, ITER, during operation and after shutdown

Mohamed A. Abdou, Anil Kumar, M. Z. Youssef, 1998 .

Summary of experiments and analyses from the JAERI/USDOE Collaborative Program on Fusion Blanket Neutronics

Hiroshi Maekawa, Mohamed A. Abdou, M. Abdou, 1995 .

Numerical Modeling for Multiphase Incompressible Flow with Phase Change

Alice Ying, Ming-Jiu Ni, Mohamed A. Abdou, 2005 .

Experimental Investigation of Turbulent Heat Transfer of High Prandtl Number Fluid Flow Under Strong Magnetic Field

Neil B. Morley, Mohamed A. Abdou, Shin-ichi Satake, 2007 .

The Establishment of Alloy Development Goals Important to the Commercialization of Tokamak-Based Fusion Reactors

John Davis, Mohamed A. Abdou, Saurin Majumdar, 1977 .

Application of the “K–ε” model to open channel flows in a magnetic field

Alice Ying, Neil B. Morley, Mohamed A. Abdou, 2002 .

A New Approach for Assessing the Required Tritium Breeding Ratio and Startup Inventory in Future Fusion Reactors

Mohamed A. Abdou, William Kuan, M. Abdou, 1999 .

Open-surface MHD flow over a curved wall in the 3-D thin-shear-layer approximation

Mohamed A. Abdou, Sergey Smolentsev, M. Abdou, 2005 .

Measurements of Specific Electrical Contact Resistance Between SiC and Lead-Lithium Eutectic Alloy

Neil B. Morley, Mohamed A. Abdou, Albert Medina, 2009 .

Coupled transient thermo-fluid/thermal-stress analysis approach in a VTBM setting

Mohamed A. Abdou, M. Narula, Alice Y. Ying, 2008 .

A Study of the Issues and Experiments for Fusion Nuclear Technology

Mark S. Tillack, D. H. Berwald, Mohamed A. Abdou, 1985 .

Deuterium-Tritium Fuel Self-Sufficiency in Fusion Reactors

Mohamed A. Abdou, Mahmoud Z. Youssef, E. L. Vold, 1986 .

MHD considerations for the DCLL inboard blanket and access ducts

Mohamed A. Abdou, Siegfried Malang, Clement Wong, 2010 .

Engineering scaling and quantification of the test requirements for fusion nuclear technology

Mark S. Tillack, Mohamed A. Abdou, H. Madarame, 1985 .

Numerical study of corrosion of ferritic/martensitic steels in the flowing PbLi with and without a magnetic field

Mohamed A. Abdou, Siegfried Malang, Sergey Smolentsev, 2013 .

Calculational methods for nuclear heating. Part I. Theoretical and computational algorithms

Mohamed A. Abdou, C. W. Maynard, M. Abdou, 1975 .

Model for determining the effective thermal conductivity of particle beds with high solid-to-gas thermal conductivity ratio

Mark S. Tillack, A. R. Raffray, Mohamed A. Abdou, 1989, IEEE Thirteenth Symposium on Fusion Engineering.

LOFA Analysis for US ITER Solid Breeder Blanket

A. R. Raffray, Mohamed A. Abdou, Alice Y. Ying, 1991 .

Review of recent MHD activities for liquid metal blankets in the US

Ramakanth Munipalli, Neil B. Morley, Mohamed A. Abdou, 2017 .

Assessment of First Wall and Blanket Options with the Use of Liquid Breeder

Per F. Peterson, Haihua Zhao, Steven J. Zinkle, 2005 .

Experimental and analytical investigations of mass transport processes of 12cr-1 movw steel in thermally-convected lithium systems

Mohamed A. Abdou, Peter F. Tortorelli, M. Abdou, 1989 .

Numerical simulation of ceramic breeder pebble bed thermal creep behavior

Hulin Huang, Alice Ying, Mohamed A. Abdou, 2002 .

Numerical characterization of thermo-mechanical performance of breeder pebble beds

Alice Ying, Mohamed A. Abdou, A. Ying, 2007 .

TEMPORAL SECOND-ORDER ACCURACY OF SIMPLE-TYPE METHODS FOR INCOMPRESSIBLE UNSTEADY FLOWS

Ming-Jiu Ni, Mohamed A. Abdou, M. Abdou, 2004 .

Experimental measurements of the effective thermal conductivity of a lithium titanate (Li2TiO3) pebbles-packed bed

Alice Ying, Mohamed A. Abdou, Ali Abou-Sena, 2007 .

Construction and initial operation of MHD PbLi facility at UCLA

T. Sketchley, Neil B. Morley, Mohamed A. Abdou, 2013 .

On the exploration of innovative concepts for fusion chamber technology

Ralph W. Moir, Alice Ying, Mark S. Tillack, 2001 .

Study of instabilities and quasi-two-dimensional turbulence in volumetrically heated magnetohydrodynamic flows in a vertical rectangular duct

Mohamed A. Abdou, Sergey Smolentsev, Rene Moreau, 2013 .

3D MHD free surface fluid flow simulation based on magnetic-field induction equations

Alice Ying, Mohamed A. Abdou, A. Ying, 2002 .

Blanket/first wall challenges and required R&D on the pathway to DEMO

Alice Ying, Neil B. Morley, Mohamed A. Abdou, 2015 .

Verification of ITER shielding capability and FENDL data benchmarking through analysis of bulk shielding experiment on large SS316/water assembly bombarded with 14 MeV neutrons

Hiroshi Maekawa, Mohamed A. Abdou, Yujiro Ikeda, 1998 .