Kenji Amaya

发表

Non-Destructive Inspection of Rebar Corrosion in Concrete Structures by Using BEM and GA

Koichi Minagawa, Keisuke Hayabusa, M. Ridha, 2008 .

Development of BEM Analysis System for Large Scale Corrosion Program

Keisuke Hayabusa, Kenji Amaya, 2003 .

Obtaining Corrosion Rates by Bayesian Estimation: Numerical Simulation Coupled with Data

Kenji Amaya, Yuki Onishi, Naoki Yoneya, 2014 .

Accurate determination of patient‐specific boundary conditions in computational vascular hemodynamics using 3D cine phase‐contrast MRI

Kohei Aoki, Kenji Amaya, Takashi Kosugi, 2013, International journal for numerical methods in biomedical engineering.

Efficient Boundary Element Method for Large Scale Corrosion Problem.

Shigeru Aoki, Kenji Amaya, Naoki Naruse, 1999 .

2704 Utilization of 3D cine phase contrat MRI in vascular CFD analysis

Kenji Amaya, Takashi Kosugi, Yuki Onishi, 2013 .

BE Inverse Analysis for Detecting the Corroded Part of Rebar in Concrete Structure

Shigeru Aoki, M. Ridha, Kenji Amaya, 1999 .

701 Development of Remote Monitoring Method for Coating Condition inside Ballast Tank using Numerical Inverse Analysis

Atsushi Nakayama, Kenji Amaya, Norio Yamamoto, 2009 .

249 Development of MTF measurement method by spot image analysis

Kenji Amaya, Kazuyoshi Okada, 2008 .

Numerical Simulation of One-Point-Bend Impact Test.

Shigeru Aoki, Kenji Amaya, Yuuki Onishi, 2002 .

Objects Oriented Analysis, Design for Inverse Problem Analysis Software

Kenji Amaya, Toru Nomakuchi, 2002 .

A locking‐free selective smoothed finite element method using tetrahedral and triangular elements with adaptive mesh rezoning for large deformation problems

Kenji Amaya, Yuki Onishi, K. Amaya, 2014 .

Development of efficient Grid Filter for non-linear sequential Bayesian estimation

Kenji Amaya, Yuki Onishi, Yuto Ayami, 2014 .

Intelligent Prediction of Coating Deterioration based on Monitoring of Potential Difference in a Ballast Water Tank

Atsushi Nakayama, Kenji Amaya, Norio Yamamoto, 2010 .

Refine Method of Human Animation Using Dynamics Knowledge

Kenji Amaya, Shuhei Horita, 2002 .

235 Development of Multi Resolution Inverse Analysis Technique Using Wavelet Transform

Shigeru Aoki, Kenji Amaya, Kazuhiro Suga, 2001 .

Emotion from Motion

Kenji Amaya, Thomas W. Calvert, Armin Bruderlin, 1996, Graphics Interface.

Stochastic Corrosion Analysis of Underground Structures Using Boundary Element Method.

Shigeru Aoki, Kenji Amaya, Akinobu Nishikawa, 2001 .

603 Accuracy Improvement of Monitoring method for Coating Condition inside Ballast Tank using Numerical inverse Analysis

Kenji Amaya, Yuki Onishi, Naoki Yoneya, 2010 .

1004 The Development of Kinematic Analysis Method of Artificial Joint

Kenji Amaya, Hitoshi Mukai, Natsumi Nakamura, 2011 .

543 Verification for Identification Method of the Current of Sacrificial Anode by BEM Analysis

Kenji Amaya, Shuji Takimoto, 2008 .

Inverse Analysis Method Using a Set of Solutions and A Priori Information.

Shigeru Aoki, Kenji Amaya, 1995 .

145 Aberration Retrieval Method using spot images with astigmatism offset

Kenji Amaya, Yuki Onishi, Nobuhiro Otomo, 2014 .

Performance Evaluation of Various Smoothed Finite Element Methods with Tetrahedral Elements in Large Deformation Dynamic Analysis

Kenji Amaya, Yuki Onishi, Ryoya Iida, 2016 .

246 Inverse analysis using a priori information on Optical Computed Tomography

Shigeru Aoki, Kenji Amaya, Sayaka Majima, 2001 .

422 Inverse Analysis Based on BEM and Genetic Algorithms for Evaluation of Reinforcement Corrosion

Shigeru Aoki, Kenji Amaya, M. Ridha, 2000 .

Development of the Practical Aberration Retrieval Method from Spot Intensity Images(Mechanical Systems)

Kenji Amaya, Masashi Ueshima, Kosei Kataoka, 2009 .

A NOVEL FINITE ELEMENT FORMULATION FOR LARGE DEFORMATION ANALYSIS BASED ON INCREMENTAL EQUILIBRIUM EQUATION IN CONJUNCTION WITH REZONING TECHNIQUE

Kenji Amaya, Yuki Onishi, 2012 .

Effective Boundary Element Corrosion Analysis of Net Structure

Shigeru Aoki, Kenji Amaya, Satoshi Imamori, 2006 .

Identification of Gurson's Material Constans by Using Kalman Filter

Shigeru Aoki, Kenji Amaya, Kazuhiro Suga, 2000 .

709 Study of Aberration Retrieval Method using Characteristics of Spot Images

Kenji Amaya, Akihiko Honda, Kazuyoshi Okada, 2010 .

Reconstruction of 3D Human Movement from Single View Images Using Kalman Fiter and Fazzy Reasoning.

Shigeru Aoki, Kenji Amaya, Yuji Hara, 1998 .

503 Analysis of toner behavior in the electorographic system using discrete element method

Kenji Amaya, Shinya Takiguchi, 2010 .

307 Mobile Motion-Capture System Using Fish-eye Lens

Kenji Amaya, Naohito Nakamura, 2005 .

606 Application of Electropainting Simulation to Practical Problems using Boundary Element Method

Kenji Amaya, Yuki Onishi, Hisashi Nagai, 2011 .

OS010-1-3 An Efficient Estimation Technique of Electroplating Current Density in LSI Fabrication Technology

Kenji Amaya, Yuji Abe, Yukiyoshi Kobayashi, 2011 .

Numerical analysis of high-resolution microlithography with thermoresist

Kenji Amaya, 1999, Advanced Lithography.

Electroplating BEM Analysis for Thin Structure by Adequate Fundamental Solution

Shigeru Aoki, Kenji Amaya, Keisuke Abe, 2002 .

Optimum Cathodic Protection of Ship(Optimization of Current Supply and Identification of Paint Defect Location).

Shigeru Aoki, Kenji Amaya, Kazunori Gouka, 1996 .

332 Development of an efficient method to identify lens aberration using intensity images

Kenji Amaya, Masashi Ueshima, 2006 .

602 Inverse Analysis of Sacrifice Electrode Current for Large-Scale Marine Structures

Kenji Amaya, Hiroki Ohno, Yuki Ohnishi, 2010 .

248 Optimization of measurement condition for the spot based aberration retrieval method

Kenji Amaya, Masashi Ueshima, 2008 .

OS10-2-4 Efficient Monitoring Method for Coating Condition inside Ballast Tank using Numerical Inverse Analysis

Kenji Amaya, Naoki Yoneya, Yuki Ohnishi, 2011 .

1607 Experimental verification for aberration retrieval method from laser spot images

Kenji Amaya, Masashi Ueshima, 2007 .

Optimization of Cathodic Protection System. (Optimum Location of Electrode on Wall).

Shigeru Aoki, Kenji Amaya, 1991 .

OPTIMIZATION OF MEASUREMENTS FOR INVERSE PROBLEM

Kenji Amaya, 1999 .

Identification of Gurson's material constants by using Kalman filter

Shigeru Aoki, Kenji Amaya, T. Nakamura, 1997 .

Optimum Design of Cathodic Protection System by 3-D BEM

Shigeru Aoki, Kenji Amaya, 1992 .

F‐bar aided edge‐based smoothed finite element method using tetrahedral elements for finite deformation analysisof nearly incompressible solids

Kenji Amaya, Yuki Onishi, Ryoya Iida, 2017 .

Boundary Element Simulation for Identification of Steel Corrosion in Concrete Using Magnetic Field Measurement

Shigeru Aoki, M. Ridha, Kenji Amaya, 2005 .

OPTIMIZATION OF CATHODIC PROTECTION BY USING BOUNDARY ELEMENT METHOD

Shigeru Aoki, Kenji Amaya, Kikuo Kishimoto, 1990 .

Reconstruction of 3D Human Movement Using Inverse Analysis

Shigeru Aoki, Kenji Amaya, Yuji Hara, 1997 .

Multistep Genetic Algorithm for Detecting Corrosion of Reinforcing Steels in Concrete

Shigeru Aoki, M. Ridha, Kenji Amaya, 2001 .

Numerical method for time-dependent localized corrosion analysis with moving boundaries by combining the finite volume method and voxel method

Keisuke Hayabusa, Kenji Amaya, Yuki Onishi, 2012 .

A method for quantifying intervertebral disc signal intensity on T2-weighted imaging

Kenji Amaya, Yoshiaki Toyama, Hideo Matsumoto, 2012, Acta radiologica.

Optimization of cathodic protection system by BEM

Shigeru Aoki, Kenji Amaya, 1997 .

Joint estimation of tissue types and linear attenuation coefficients for photon counting CT.

Katsuyuki Taguchi, Kenji Amaya, George S K Fung, 2015, Medical physics.