Shinsuke Sakai

发表

P35 Evaluation of Loosening Proof Performances of Double-nut Tightening System and Spring Washer by Three-dimensional Finite Element Analysis

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2006 .

Application of Matrix Method in Structural Analysis to Nonlinear Crack Problems Based on Energy Principle.

Shinsuke Sakai, Jun Takahashi, Hiroyuki Okamura, 1992 .

Tightening and Self-loosening Behavior of Double-nut Tightening System by Three-dimensional Finite Element Method

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2006 .

Evaluation of Loosening Proof Performance of Plain Washer and Flange Nut by Three-Dimensional Finite Element Analysis

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2006 .

Finite element modelling for the wear prediction of front rod of railroad switch due to the impact vibration caused by train passage

Takashi Kato, Satoshi Izumi, Shinsuke Sakai, 2015 .

Formulation of sensitivity analysis in life cycle assessment using a perturbation method

Shinsuke Sakai, Koji Yokoyama, S. Sakai, 2002 .

W05(2) Dynamics and CAE Technologies of Threaded Fastener

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2007 .

Planar mobility modes of 8-bar-jointed structures with a single degree of freedom

Satoshi Izumi, Shinsuke Sakai, Hiro Tanaka, 2012 .

0405 Extended Bayesian Inference Method for Evaluating Pipe Failure Probability in Corrosion Rate Fluctuation Model

Satoshi Izumi, Shinsuke Sakai, Satoshi Okajima, 2007 .

PS35 Development of the method for quantitative evaluation of safety margin of piping

Satoshi Izumi, Shinsuke Sakai, Hiroshi Hirayama, 2010 .

Formulation of a Stochastic Fatigue Crack Growth Model and its Numberical Analysis.

Shinsuke Sakai, Tetsuya Sasaki, Hiroyuki Okamura, 1992 .

403 THE RELIABILITY INVESTIGATION ON THE ASSESSMENT CRITERIA FOR LOCAL METAL LOSS BASED ON API 579-1/ASME FFS-1

Satoshi Izumi, Shinsuke Sakai, Takuyo Kaida, 2010 .

Investigation into the self-loosening behavior of bolted joint subjected to rotational loading

Satoshi Izumi, Shinsuke Sakai, Mårten Olsson, 2012 .

Efficient Fitting Procedure for Corrosion Rate Distribution in View of Reliability Analysis

Shinsuke Sakai, Takuyo Kaida, 2017 .

Loosening Analysis for Swing Circle Tightening Body of Excavator Subjected to Impact Loading: Explicit Finite Element Approach

Satoshi Izumi, Shinsuke Sakai, Yoshikazu Yamada, 2012 .

Application of Partial Safety Factors for Fitness-for-Service Assessment of Pressure Equipment With Local Metal Loss

Shinsuke Sakai, Takuyo Kaida, 2017 .

OS1009 Finite Element Method Analysis for Wearing Mechanism on Attachment Device of Railroad Switch

Satoshi Izumi, Shinsuke Sakai, Masahiko Suzuki, 2013 .

Small Loosening of Bolt-Nut Tightening System due to Micro Bearing-Surface Slip: Finite Element Method Study

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2006 .

GS0902 Proposal of Rational Determination of Fracture Toughness Lower-Bound Curves by Master Curve Approach : Part I Applicability of Master Curve Approach for Japanese Pressure Vessel Steels

Naoki Miura, Shinsuke Sakai, Naoki Soneda, 2008 .

OS0920-315 Application of partial safety factors for Fitness-For-Service assessment of pressure equipment with local metal loss

Shinsuke Sakai, Takuyo Kaida, 2015 .

Sensitivity Analysis of Partial Safety Factors in Structural Integrity Evaluation with Failure Assessment Diagram

Shinsuke Sakai, Tetsuya Sasaki, Yuichi Mogami, 2009 .

702 Evaluation of Loosening Resistance Performance of Conical Spring Washer by Three-dimensional Finite Element Analysis

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2007 .

Evaluation of Cumulative Fatigue Damage and Crack Propagation Rate under Stationary Gaussian Random Loads

Shinsuke Sakai, Hiroyuki Okamura, 1983 .

Current Status of Developing RBI Guideline in Japan

Shinsuke Sakai, 2006 .

A FINITE DIFFERENCE SOLUTION TO SELF-WEIGHT CONSOLIDATION EQUATIONS USING A PREDICTOR-CORRECTOR METHOD

Shinsuke Sakai, Takuo Yamagami, T. Yamagami, 1997 .

Proposal of Rational Determination of Fracture Toughness Lower-Bound Curves by Master Curve Approach

Naoki Miura, Shinsuke Sakai, Naoki Soneda, 2009 .

F031001 Development of JIS Standard : Progress of development reliability related standard for mechanical structures

Shinsuke Sakai, 2014 .

FInite element analysis of loosening mechanism of bolted joint and its application to super slit nut

Atsushi Iwasaki, Satoshi Izumi, Shinsuke Sakai, 2004 .

Three-dimensional Finite Element Analysis of Tightening and Loosening Mechanism of Threaded Fastener

Atsushi Iwasaki, Satoshi Izumi, Shinsuke Sakai, 2005 .

2224 Evaluation of Loosening Proof Performance of Plain Washer and Hexagonal Nut with Flange by Three-Dimensional Finite Element Analysis

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2005 .

A Theoretical Study on Creep Damage Detection by Ultrasonic Wave Measurement ( JAPAN )

Shinsuke Sakai, Masaaki Matsubara, A. Nitta, 1990 .

Reliability Analysis on S-N Evaluation Model.

Koji Sasaki, Shinsuke Sakai, Hiroyuki Okamura, 1993 .

Development of a flaw evaluation handbook of the high pressure institute of Japan

Katsumasa Miyazaki, Shinsuke Sakai, Hideo Kobayashi, 2000 .

Self-Loosening Analysis of Bolt-Nut Tightening System Subjected to Axial Loading by Three-Dimensional Finite Element Method

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2007 .

Self-loosening Behaviour of a Spring Washer: Three-dimensional Finite Element Method Study

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2007 .

Closed-Form Expressions of the Compliance due to the Presence of Crack for SEN Specimens under Tension and Bending.

Hiroyuki Okamura, Shinsuke Sakai, Jun Takahashi, 1993 .

102 Deformation Localization of Flexibly Jointed Square Cell Structure Subjected to Compression Load

Satoshi Izumi, Shinsuke Sakai, Hiro Tanaka, 2010 .

3233 Evaluation of Loosening Proof Performances of Spring Washer by Three-dimensional Finite Element Analysis

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2006 .

Statistical Evaluation of the Distribution of Crack Propagation Fatigue Life by Simulating the Crack Growth Process

Shinsuke Sakai, Tetsuya Sasaki, Hiroyuki Okamura, 1991 .

006 Investigation of the vibration behavior of the rolling bearing unit for space equipment by numerical simulation

Satoshi Izumi, Shinsuke Sakai, Miki Nishimoto, 2015 .

Stress Intensity Factors for C-Shaped Specimens. Application of Statically Indeterminate Fracture Mechanics to Displacement-Controlled C-Shaped Specimens.

Shinsuke Sakai, Jun Takahashi, Hiroyuki Okamura, 1991 .

432 Optimum Design for the Leakage Performance of New Metallic Gasket

Satoshi Izumi, Shinsuke Sakai, Masato Nagawa, 2007 .

Development of a molecular dynamics potential for Si–H systems and its application to CVD reaction processes

Satoshi Izumi, Shinsuke Sakai, Shotaro Hara, 2004 .

Detecting Method of Striation Region of Fatigue Fracture Surface Using Wavelet Transform

Satoshi Izumi, Shinsuke Sakai, Kenta Yamagiwa, 2004 .

Computer-controlled elastic-plastic fatigue crack growth testing using multi-task programming

Shinsuke Sakai, H. Okamura, T. Asakawa, 1998 .

The Research Committee of Chuetsu-Oki Earthquake Influences to Kashiwazaki-Kariwa Nuclear Power Station : Seismic Margin on Nuclear Power Station Design(Chuetsu-Oki Earthquake Influences to Nuclear Power Station, Power and Energy System Symposium)

Shinsuke Sakai, Toshiyuki Takagi, Hiroshi Miyano, 2009 .

Method for Characterizing Fracture Surface by Using Two-Dimensional Local Hurst Exponent, and its Application to the Quantitative Evaluation of Stretched-Zone Width

Satoshi Izumi, Shinsuke Sakai, Masahiro Takanashi, 2005 .

Diagnostic Method for Delamination Monitoring of CFRP Plate Using Kriging Interpolation Method

Akira Todoroki, Atsushi Iwasaki, Satoshi Izumi, 2007 .

Analytical Modelling of the Mechanical Behavior of Bolted Joint Subjected to Transverse Loading

Satoshi Izumi, Shinsuke Sakai, Takashi Yokoyama, 2010 .

Development of New Metallic Gasket and its Optimum Design for Leakage Performance

Satoshi Izumi, Shinsuke Sakai, Masato Nagawa, 2008 .

Evaluation of Loosening Resistance Performance of Conical Spring Washer by Three-dimensional Finite Element Analysis

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2008 .

Anomaly Detection System by Statistical Analysis of Incorrect Signal About Monitoring System of Railway(Machine Elements, Design and Manufacturing)

Atsushi Iwasaki, Hirotatsu Yamazaki, Shinsuke Sakai, 2010 .

Performance index and rational maintenance method of cut slope in consideration of long-term deterioration

Hiroshi Yamazaki, Shinsuke Sakai, Shinsuke Sakai, 2017 .

3-Dimensional Measurement of Fracture Surface Using SEM via the Combination of Stereo Matching and Integrating Secondary Electron Intensity.

Shinsuke Sakai, Jun Jiang, 2002 .

Risk Based Design

Hideo Kobayashi, Shinsuke Sakai, Shinsuke Sakai, 2003 .

Verification of Anti-Loosening Performance of Super Slit Nut bv Finite Element Method

Atsushi Iwasaki, Satoshi Izumi, Shinsuke Sakai, 2005 .

Optimization of the Maintenance Program of Elevating Equipment Using Risk Assessment

Shinsuke Sakai, Satoshi Izumi, Shinsuke Sakai, 2013 .

On the Distribution of Rainflow Range for Gaussian Random Processes with Bimodal PSD

Shinsuke Sakai, Hiroyuki Okamura, S. Sakai, 1995 .

Loosening-resistance evaluation of double-nut tightening method and spring washer by three-dimensional finite element analysis

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2009 .

Sensitivity analysis of total CO2 emission intensities estimated using an input–output table

Shinsuke Sakai, Hiroki Hondo, Shiro Tanno, 2002 .

Damage and Fault Diagnosis of In-service Structure via Statistical Comparison of Relation between Sensor measurements

Akira Todoroki, Yoshinobu Shimamura, Atsushi Iwasaki, 2008 .

Small Loosening of Bolt-nut Fastener Due to Micro Bearing-Surface Slip: A Finite Element Method Study

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2007 .

Fault Diagnosis via the Statistical Comparison of Relation Between Binary Parameters Using LVQ(Mechanical Systems)

Atsushi Iwasaki, Hirotatsu Yamazaki, Shinsuke Sakai, 2010 .

Design Evaluation Method for Random Fatigue Based on Spectrum Characteristics

Naoto Kasahara, Shinsuke Sakai, Satoshi Izumi, 2012 .

Onset of Wiggling in a Microscopic Patterned Structure Induced by Intrinsic Stress During the Dry Etching Process

Satoshi Izumi, Shinsuke Sakai, Hiro Tanaka, 2014 .

The development and micro testing of MEMS samples for the strength analysis of silicon beams

Satoshi Izumi, Shinsuke Sakai, Yuzuru Ueda, 2003 .