Rong Yan

发表

Parametric chip thickness model based cutting forces estimation considering cutter runout of five-axis general end milling

Fangyu Peng, Kang Song, Xianyin Duan, 2016 .

Variable eccentric distance-based tool path generation for orthogonal turn-milling

Bin Li, Fangyu Peng, Wei Wang, 2015 .

Posture-dependent stability prediction of a milling industrial robot based on inverse distance weighted method

Fangyu Peng, Chen Chen, Fangyu Peng, 2018 .

Experimental study of the effect of tool orientation on cutter deflection in five-axis filleted end dry milling of ultrahigh-strength steel

Bin Li, Fangyu Peng, Xianyin Duan, 2015 .

Optimization of Parameters of Aircraft Landing Gear with Orthogonal Turn-Milling Based on GRA-PSO Algorithm

Bin Li, Fangyu Peng, Feng Li, 2014 .

Geo-location-based image filters

Rong Yan, Sheldon Chang, Chamal Samaranayake, 2017 .

An Investigation of Workpiece Temperature in Orthogonal Turn-Milling Compound Machining

Bin Li, Fangyu Peng, Yizhi Liu, 2015 .

Prediction of flexible cutting forces and tool deflections for general micro end mill considering tool run-out and deflection feedback

Ming Liu, Fangyu Peng, Lin Zhou, 2018 .

Accurate and efficient prediction of milling stability with updated full-discretization method

Fangyu Peng, Xiaowei Tang, Yuting Li, 2017 .

Stiffness performance index based posture and feed orientation optimization in robotic milling process

Fangyu Peng, Chen Chen, Yuting Li, 2019, Robotics and Computer-Integrated Manufacturing.

A Geometric Error Identification and Simulation Method Based on Laser Tracker for Large-Scale Multi-Axis NC Machine Tools

Jing Wu, Fangyu Peng, Rong Yan, 2012 .

Experimental Research of Workpiece Temperature in Orthogonal Turn-Milling Compound Machining

Fangyu Peng, Sheng Yang, Rong Yan, 2014 .

Three degrees of freedom stability analysis in the milling with bull-nosed end mills

Fangyu Peng, Hua Li, Xiaowei Tang, 2016 .

Analytical modeling and experimental validation of workpiece temperature variation in bull-nose end milling

Fangyu Peng, Shuzi Yang, Qiong Dong, 2016 .

An investigation of residual stresses in micro-end-milling considering sequential cuts effect

Fangyu Peng, Hongmei Zeng, Ben Deng, 2017, The International Journal of Advanced Manufacturing Technology.

The Effect of Vibration on the Surface Topography in Micro-Milling

Jing Wu, Fangyu Peng, Shuai Yuan, 2012 .

Modeling and controlling of surface micro-topography feature in micro-ball-end milling

Jing Wu, Fangyu Peng, Shuai Yuan, 2013 .

Estimation of Cutter Deflection Based on Study of Cutting Force and Static Flexibility

Bin Li, Fangyu Peng, Xianyin Duan, 2016 .

RCSA-Based Method for Tool Frequency Response Function Identification Under Operational Conditions Without Using Noncontact Sensor

Hua Li, Fangyu Peng, Xiaowei Tang, 2017 .

An investigation of workpiece temperature variation in end milling considering flank rubbing effect

Fangyu Peng, Yizhi Liu, Jie Wen, 2013 .

A virtual repulsive potential field algorithm of posture trajectory planning for precision improvement in robotic multi-axis milling

Fangyu Peng, Rong Yan, Zepeng Li, 2022, Robotics Comput. Integr. Manuf..

A hybrid mechanism-based and data-driven approach for the calibration of physical properties of Ni-based superalloy GH3128*

Fangyu Peng, Rong Yan, Hao Sun, 2021, 2021 27th International Conference on Mechatronics and Machine Vision in Practice (M2VIP).

Cutting force prediction considering tool path curvature and torsion based on screw theory

Fangyu Peng, Zerun Zhu, Rong Yan, 2021, The International Journal of Advanced Manufacturing Technology.

A transfer learning based geometric position-driven machining error prediction method for different working conditions*

Fangyu Peng, Rong Yan, Hao Sun, 2021, 2021 27th International Conference on Mechatronics and Machine Vision in Practice (M2VIP).

Configuration optimization through redundancy angle and tool posture by force induced error index in robot ball-end milling

Fangyu Peng, Zerun Zhu, Rong Yan, 2021, Procedia CIRP.

Analysis of the Effect of Tool Posture on Stability Considering the Nonlinear Dynamic Cutting Force Coefficient

Fangyu Peng, Rong Yan, Zepeng Li, 2021 .

A kMap optimized VMD-SVM model for milling chatter detection with an industrial robot

Fangyu Peng, Yu Wang, Rong Yan, 2021, J. Intell. Manuf..

Tool wear parameters identification in precision milling using a hybrid model combining cutting forces analytical model and Gaussian process regression method*

Fangyu Peng, Rong Yan, Hao Sun, 2021, 2021 27th International Conference on Mechatronics and Machine Vision in Practice (M2VIP).

Specific cutting energy index (SCEI)-based process signature for high-performance milling of hardened steel

Fangyu Peng, Chen Chen, Zerun Zhu, 2019, The International Journal of Advanced Manufacturing Technology.

Notch wear prediction model in high speed milling of AerMet100 steel with bull-nose tool considering the influence of stress concentration

Fangyu Peng, Rong Yan, Haohao Zeng, 2018, Wear.

Stability Prediction Based Effect Analysis of Tool Orientation on Machining Efficiency for Five-Axis Bull-Nose End Milling

Fangyu Peng, Chen Chen, Zerun Zhu, 2018, Journal of Manufacturing Science and Engineering.

Stability Prediction and Step Optimization of Trochoidal Milling

Fangyu Peng, Rong Yan, Haohao Zeng, 2017 .

Analytical modelling and experimental validation of micro-ball-end milling forces with progressive tool flank wear

Fangyu Peng, Rong Yan, Ben Deng, 2020, The International Journal of Advanced Manufacturing Technology.

Analytical modeling and experimental validation of micro end-milling cutting forces considering edge radius and material strengthening effects

Fangyu Peng, Bin Li, Rong Yan, 2015 .

Influence mechanism of machining angles on force induced error and their selection in five axis bullnose end milling

Fangyu Peng, Zerun Zhu, Rong Yan, 2020 .

An effective time domain model for milling stability prediction simultaneously considering multiple modes and cross-frequency response function effect

Fangyu Peng, Xin Li, Rong Yan, 2016 .

The effect of variable cutting depth and thickness on milling stability for orthogonal turn-milling

Fangyu Peng, Yong Wang, Rong Yan, 2016 .