Hong-Zhong Huang

发表

A comparison study of support vector machines and hidden Markov models in machinery condition monitoring

Qiang Miao, Hong-Zhong Huang, Xianfeng Fan, 2007 .

Reliability analysis of a satellite system considering common cause failures

Weiwen Peng, Hong-Zhong Huang, Hang Zhou, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Reliability modeling study of in-orbit satellite systems

Qiang Miao, Hong-Zhong Huang, Lianna Lu, 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.

Maintainability verification for airplanes with small samples based on similarity degree

Yu Liu, Hong-Zhong Huang, Zhong-Zhe Chen, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

A new method of system reliability multi-objective optimization using genetic algorithms

Hong-Zhong Huang, Jian Qu, M.J. Zuo, 2006, RAMS '06. Annual Reliability and Maintainability Symposium, 2006..

Reliability model of distributed simulation system

Hong-Zhong Huang, Yi Chen, Hu Wan, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Bivariate Analysis of Incomplete Degradation Observations Based on Inverse Gaussian Processes and Copulas

Weiwen Peng, Hong-Zhong Huang, Yuanjian Yang, 2016, IEEE Transactions on Reliability.

Reliability modeling for dependent competitive failure processes

Hong-Zhong Huang, Zhong-Lai Wang, Li Du, 2008, 2008 Annual Reliability and Maintainability Symposium.

Notice of RetractionA nonlinear fatigue damage accumulation model accounting for load interaction effects

Hong-Zhong Huang, Shun-Peng Zhu, Zhiqiang Lv, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Neural Networks for Reliability-Based Optimal Design

Hong-Zhong Huang, Ming Jian Zuo, Zhigang Tian, 2007, Intelligence in Reliability Engineering.

A new simulation model for assessing aircraft emergency evacuation considering passenger physical characteristics

Hong-Zhong Huang, Yuanjian Yang, Weijie Wang, 2014, Reliab. Eng. Syst. Saf..

Research on product development process modeling

Hong-Zhong Huang, Xu Zu, 2004, 8th International Conference on Computer Supported Cooperative Work in Design.

Curve fitting with weight assignment under evidence theory combination rule

Qiang Miao, Hong-Zhong Huang, Rui Sun, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

A Unified Optimization Design Model Under Uncertainty

Xiaoling Zhang, Hong-Zhong Huang, Huanwei Xu, 2009 .

A Practical Method to Predict Total Fatigue Life of Welded Joints Structures

Hong-Zhong Huang, Shun-Peng Zhu, Zhiqiang Lv, 2015 .

Rolling element bearing fault detection using an improved combination of Hilbert and wavelet transforms

Hong-Zhong Huang, Xianfeng Fan, Dong Wang, 2009, Journal of Mechanical Science and Technology.

Enhanced sequential optimization and reliability assessment for reliability-based design optimization

Yu Liu, Hong-Zhong Huang, Xudong Zhang, 2012 .

Flight control system reliability study based on hIdden Markov Model imperfect fault coverage model-Hidden Markov Model

Hong-Zhong Huang, Xiaopeng Li, Zhonglai Wang, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

A Practice of Imperfect Maintenance Model Selection for Diesel Engines

Hong-Zhong Huang, Yu Liu, Shun-Peng Zhu, 2013 .

Non-probabilistic uncertain static responses of imprecisely defined structures with fuzzy parameters

Hong-Zhong Huang, Snehashish Chakraverty, Diptiranjan Behera, 2016, J. Intell. Fuzzy Syst..

A discrete stress-strength interference model based on universal generating function

Hong-Zhong Huang, Yu Liu, Zong-Wen An, 2008, Reliab. Eng. Syst. Saf..

Bayesian Reliability Estimation for Deteriorating Systems with Limited Samples Using the Maximum Entropy Approach

Weiwen Peng, Hong-Zhong Huang, Yanfeng Li, 2013, Entropy.

Dynamic Reliability Assessment for Multi-State Systems Utilizing System-Level Inspection Data

Hong-Zhong Huang, Ming Jian Zuo, Yanfeng Li, 2015, IEEE Transactions on Reliability.

Bayesian Reliability and Performance Assessment for Multi-State Systems

Hong-Zhong Huang, Yanfeng Li, Peng Lin, 2015, IEEE Transactions on Reliability.

Neural-network-driven Fuzzy Reasoning of Dependency Relationships among Product Development Processes

Hong-Zhong Huang, Yong-Hua Li, Ying-Kui Gu, 2008, Concurr. Eng. Res. Appl..

Dynamic reliability based design optimization of the lifting gear transmission system for mining excavator

Hong-Zhong Huang, Wei Peng, Xiaoling Zhang, 2016, 2016 Annual Reliability and Maintainability Symposium (RAMS).

A diagnostics design decision model for products under warranty

Wei Chen, Hong-Zhong Huang, Bo Yang, 2007, 2007 Annual Reliability and Maintainability Symposium.

Reliability - Based Design Incorporating Several Maintenance Policies

Hong-Zhong Huang, Xiaoping Du, Zhonglai Wang, 2009 .

Fatigue Life Prediction of Fan Blade Using Nominal Stress Method and Cumulative Fatigue Damage Theory

Hong-Zhong Huang, Yan-Feng Li, Cheng-Geng Huang, 2020 .

Reliability analysis of electrohydraulic servo valve suffering common cause failures

Weiwen Peng, Hong-Zhong Huang, Yu Liu, 2014 .

Satisficing Approximation Response Model Based on Neural Network in Multidisciplinary Collaborative Optimization

Hong-Zhong Huang, Ye Tao, Bao-Gui Wu, 2007, ISNN.

A Unified Framework for Integrated Optimization Under

Yu Liu, Hong-Zhong Huang, Zhonglai Wang, 2012 .

RELIABILITY ANALYSIS OF MECHANICAL VIBRATION COMPONENT USING FUZZY SETS THEORY ANALIZA NIEZAw OdNOśCIO w A MECHANICZNEGO ELEMENTU wIBRA- CYjNEGO Z wY kORZYSTANIEM TEORII ZBIORów ROZMYTYCH

Hong-Zhong Huang, Yan-Feng Li, Zhong-Lai Wang, 2012 .

Graph Theory-based Logic Relationship Programming of Product Development Process

Hong-Zhong Huang, Ying-Kui Gu, Hong-Zhong Huang, 2007, Concurr. Eng. Res. Appl..

Multi-objective optimization of load-sharing system

Wei Zhang, Li Li, Hong-Zhong Huang, 2016 .

Application of reliability-based multidisciplinary design optimization to folding mechanism

Hong-Zhong Huang, Huanwei Xu, Xudong Zhang, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

An Application of Fuzzy Fault Tree Analysis to Uncontained Events of an Areo-Engine Rotor

Hong-Zhong Huang, Yu Liu, Yan-Feng Li, 2012 .

Intelligent Interactive Multiobjective Optimization of System Reliability

Hong-Zhong Huang, Ming Jian Zuo, Zhigang Tian, 2007, Computational Intelligence in Reliability Engineering.

An E-Bayesian method for reliability analysis of exponentially distributed products with zero-failure data

Weiwen Peng, Hong-Zhong Huang, Jinhua Mi, 2016 .

Reliability evaluation of lithography machines using an customer satisfaction index

Hong-Zhong Huang, Yu Liu, Jing Li, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Perturbation finite element method of structural analysis under fuzzy environments

Hong-Zhong Huang, Hai-Bin Li, 2005, Eng. Appl. Artif. Intell..

Importance identification for fault trees based on possibilistic information measurements

Hong-Zhong Huang, Yu Pang, Yanfeng Li, 2013, J. Intell. Fuzzy Syst..

Optimal Design of Conic-Cylindrical Gear Reduction Unit Using Fuzzy Physical Programming

Hong-Zhong Huang, Zhigang Tian, Xu Zhang, 2004, Intelligent Information Processing.

Support vector machine based estimation of remaining useful life: current research status and future trends

Hong-Zhong Huang, Yan-Feng Li, Longlong Zhang, 2015, Journal of Mechanical Science and Technology.

Fault tree analysis of feeding control system for computer numerical control heavy-duty horizontal lathes with multiple common cause failure groups

Weiwen Peng, Hong-Zhong Huang, Jinhua Mi, 2016 .

Reliability analysis of an automated aircraft structural parts production line

Hong-Zhong Huang, Haiqing Li, Rong Yuan, 2013, 2013 Proceedings Annual Reliability and Maintainability Symposium (RAMS).

Interaction Prediction Optimization in Multidisciplinary Design Optimization Problems

Hong-Zhong Huang, Xiaoling Zhang, Huanwei Xu, 2014, TheScientificWorldJournal.

A Hierarchical Statistical Sensitivity Analysis Method for Multilevel Systems With Shared

Hong-Zhong Huang, Yu Liu, Wei Chen, 2010 .

Degradation Analysis Using Inverse Gaussian Process Model With Random Effects: A Bayesian Perspective

Weiwen Peng, Yu Liu, Hong-Zhong Huang, 2013 .

Highly Reliable, Easy to Maintain and Ready to Support

Rui Kang, Hong-Zhong Huang, Qiang Miao, 2009 .

Bayesian information fusion for degradation analysis of deteriorating products with individual heterogeneity

Weiwen Peng, Hong-Zhong Huang, Junyu Guo, 2019 .

Fault tree analysis using evidence theory and evidential networks With imprecise expert knowledge

Hong-Zhong Huang, Qiang Liao, Yanfeng Li, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

analysis of ReP aiRable system with omitted oR delayed failuRe effects Posybilistyczna analiza niezawodnościowa systemu naPR awialnego z Pominiętym lub oPóźnionym efektem uszkodzenia

Hong-Zhong Huang, Yu Liu, Yan-Feng Li, 2012 .

Life cycle reliability assessment of new products - A Bayesian model updating approach

Weiwen Peng, Hong-Zhong Huang, Ming Jian Zuo, 2013, Reliab. Eng. Syst. Saf..

Hybrid fuzzy skyhook surface control using multi-objective microgenetic algorithm for semi-active ve

Hong-Zhong Huang, Yi Chen, Jing Qiu, 2012 .

Topology Optimization of Piezoelectric Energy Harvesting Strap Buckle

Bin Zheng, Hae Chang Gea, Hong-Zhong Huang, 2009, DAC 2009.

Analysis and optimal design of systems operating in a random environment and having a rescue option

Hong-Zhong Huang, Gregory Levitin, Maxim Finkelstein, 2019, Int. J. Gen. Syst..

A Comprehensive Evaluation Model for Assessments of Grinding Machining Quality

Hong-Zhong Huang, Yong Hua Li, L.-H. Xue, 2005 .

Inverse Gaussian process models for degradation analysis: A Bayesian perspective

Weiwen Peng, Hong-Zhong Huang, Yuanjian Yang, 2014, Reliab. Eng. Syst. Saf..

Dynamic Reliability Assessment for Multi-State Degraded Systems

Yu Liu, Hong-Zhong Huang, Ming J. Zuo, 2013 .

Application of robust design to gearbox transmission system

Hong-Zhong Huang, Huanwei Xu, Bei Peng, 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.

Gearbox On-Line Condition Monitoring Using Empirical Mode Decomposition

Hong-Zhong Huang, Xianfeng Fan, Dong Wang, 2009 .

Notice of RetractionLifetime assessment of inertial navigation devices

Hong-Zhong Huang, Yu Liu, Xihui Liang, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Characterizing wafer stage transmission errors via binary decision diagram and dynamic fault tree

Yu Liu, Hong-Zhong Huang, Yan-Feng Li, 2018 .

Game model of Flight-Control-System reliability under uncertain maintenance cost

Hong-Zhong Huang, Xiaopeng Li, Ningbo Liu, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

A Reliability Allocation Method Considering Failure Dependence

Yu Liu, Hong-Zhong Huang, Zhong-Zhe Chen, 2013 .

Parameter estimation for software reliability models considering failure correlation

Hong-Zhong Huang, Bo Yang, Ning Ning, 2008, 2008 Annual Reliability and Maintainability Symposium.

Fuzzy Physical Programming and Its Application in Optimization of Through Passenger Train Plan

Hong-Zhong Huang, Zhi-Gang Tian, Li-Wen Guan, 2002 .

Notice of RetractionFatigue life estimation considering strengthening of low amplitude loads using grey model

Hong-Zhong Huang, Liping He, Zhiqiang Lv, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Evaluation and decision of products conceptual design schemes based on customer requirements

Yu Liu, Hong-Zhong Huang, Zhonglai Wang, 2011 .

Non-probabilistic reliability research on multi-variable hydraulic turbine blade model

Hong-Zhong Huang, Yu Pang, Xiang Zhang, 2016 .

A modified nonlinear fatigue damage accumulation model

Hong-Zhong Huang, Shun-Peng Zhu, Zhiqiang Lv, 2015 .

A Modified Cumulative Damage Model for Fatigue Life Prediction under Variable Amplitude Loadings

Hong-Zhong Huang, Shun-Peng Zhu, Qiang Lei, 2016 .

A failure rate interaction model for two-component systems based on copula function

Xiaoling Zhang, Hong-Zhong Huang, Wei Peng, 2016 .

Reliability Bounds for Multi-State k-out-of-n Systems

Hong-Zhong Huang, Ming Jian Zuo, Zhigang Tian, 2008, IEEE Trans. Reliab..

Damage Detection of Gearbox Using Wavelet-Based Singularity Analysis Method

Qiang Miao, Hong-Zhong Huang, Xianfeng Fan, 2007 .

A new fault tree analysis approach based on imprecise reliability model

Zheng Liu, Hong-Zhong Huang, Liping He, 2014 .

Fatigue Lifetime Assessment of Aircraft Engine Disc via Multi-source Information Fusion

Weiwen Peng, Hong-Zhong Huang, Huiying Gao, 2014 .

Fuzzy Reliability Prediction Method Based on FMECA for Diesel Engine

Yu Liu, Hong-Zhong Huang, Han-Liang Zhang, 2009 .

Grid service reliability modeling on fault recovery and optimal task scheduling

Hong-Zhong Huang, Bo Yang, Suchang Guo, 2009, 2009 Annual Reliability and Maintainability Symposium.

Review of remaining useful life prediction using support vector machine for engineering assets

Hong-Zhong Huang, Jing Li, Zhiliang Liu, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

A Method for Multiaxial Fatigue Reliability Analysis Based on Mixed Weibull Distribution

Hong-Zhong Huang, Xiaoling Zhang, Song Wang, 2013 .

FUZZY METHOD FOR FAILURE CRITICALITY ANALYSIS

Hong-Zhong Huang, Lei Xu, Zhong-Wu Hu, 2000 .

Static Analysis of Crane Gearbox QJC-D900

Xiaoling Zhang, Qiang Miao, Hong-Zhong Huang, 2007 .

Reliability-based topology optimization considering corrosion

Hong-Zhong Huang, Bin Zheng, Xiao-jun Wang, 2012, 2012 Proceedings Annual Reliability and Maintainability Symposium.

Probabilistic Fatigue Life Prediction of Turbine Disc Considering Model Parameter Uncertainty

Hong-Zhong Huang, Le Yu, Liping He, 2015 .

Product Development Process Modeling Based on Information Feedback and Requirement Cooperation

Hong-Zhong Huang, Ying-Kui Gu, Hong-Zhong Huang, 2006, Concurr. Eng. Res. Appl..

A Discrete Stress-Strength Interference Model With Stress Dependent Strength

Hong-Zhong Huang, Zong-Wen An, Hongzhong Huang, 2009, IEEE Transactions on Reliability.

A New Multidisciplinary Design Optimization Method Accounting for Discrete and Continuous Variables under Aleatory and Epistemic Uncertainties

Hong-Zhong Huang, Yanfeng Li, Xudong Zhang, 2012, Int. J. Comput. Intell. Syst..

Fatigue Life Analysis of Turbine Disks Based on Load Spectra of Aero-engines

Hong-Zhong Huang, Yan-Feng Li, Shun-Peng Zhu, 2015 .

Lifetime prediction for turbine discs based on a modified Walker strain model

Hong-Zhong Huang, Zhiqiang Lv, Huiying Gao, 2015 .

Reliability Analysis of Structure for Fuzzy Safety State

Hong-Zhong Huang, Yanfeng Li, Zhonglai Wang, 2012, Intell. Autom. Soft Comput..

A nonlinear fatigue damage accumulation model considering strength degradation and its applications to fatigue reliability analysis

Hong-Zhong Huang, Haiqing Li, Rong Yuan, 2015 .

Reliability Analysis of Automotive Semi-Axle on Basic of Imprecise Probability

Zheng Liu, Hong-Zhong Huang, Zhonglai Wang, 2013 .

Reliability analysis of gear transmission with considering failure correlation

Zheng Liu, Hong-Zhong Huang, Le Yu, 2015 .

Notice of RetractionReliability analysis for lubricating oil pressure indicating and alarming system on the basis of imprecise probability

Zheng Liu, Hong-Zhong Huang, Liping He, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Reliability optimization for redundant Flight Control System based on genetic algorithm

Hong-Zhong Huang, Jing Li, Kesheng Wang, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Modeling and Analysis of Grid Service Reliability Considering Fault Recovery

Hong-Zhong Huang, Yu Liu, Suchang Guo, 2011, New Generation Computing.

An estimation method of system performance degradation state based on fault tree method

Weiwen Peng, Hong-Zhong Huang, Zhonglai Wang, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Mean-value first-order saddlepoint approximation based collaborative optimization for multidisciplinary problems under aleatory uncertainty

Hong-Zhong Huang, Xiaoling Zhang, Zhonglai Wang, 2013, Journal of Mechanical Science and Technology.

Identification of characteristic components in frequency domain from signal singularities.

Qiang Miao, Hong-Zhong Huang, Dong Wang, 2010, The Review of scientific instruments.

Weibull distribution research based on Fourier series

Weiwen Peng, Lei Liu, Hong-Zhong Huang, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Notice of RetractionApplication of beta factor method for reliability evaluation of EHSV

Weiwen Peng, Hong-Zhong Huang, Hang Zhou, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Reliability prediction for evolutionary product in the conceptual design phase using neural network-based fuzzy synthetic assessment

Hong-Zhong Huang, Yu Liu, Dan Ling, 2013, Int. J. Syst. Sci..

Dynamic reliability modeling for system analysis under complex load

Hong-Zhong Huang, Jinhua Mi, Yan-Feng Li, 2018, Reliab. Eng. Syst. Saf..

Notice of RetractionA study on Bayesian design of degradation tests with the inverse Gaussian processes

Weiwen Peng, Hong-Zhong Huang, Yu Liu, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Concurrent Engineering based collaborative design Under network environment

Qiang Miao, Hong-Zhong Huang, Xianfeng Fan, 2006 .

Notice of RetractionA modified non-linear damage accumulation model considering load interaction effects under two-level loading

Hong-Zhong Huang, Yan-Feng Li, Shun-Peng Zhu, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Reliability Analysis of Complex Multi-state System with Common Cause Failure Based on DS Evidence Theory and Bayesian Network

Weiwen Peng, Hong-Zhong Huang, Jinhua Mi, 2018 .

Fourier series based reliability analysis of aeroengine turbine blade under linear fuzzy safety state

Hong-Zhong Huang, Nan Li, Chun Nam Wong, 2013 .

A NEW NON-LINEAR CONTINUUM DAMAGE MECHANICS MODEL FOR THE FATIGUE LIFE PREDICTION UNDER VARIABLE LOADING

Hong-Zhong Huang, Haiqing Li, Yan Feng Li, 2013 .

The life prediction of lead-free solder joint with type-I interval censored data

Weiwen Peng, Hong-Zhong Huang, Jie Wang, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Fault tree analysis on kinematic accuracy of wafer stage using BDD and DFTA technique

Hong-Zhong Huang, Yu Liu, Hai-Qing Li, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

GA Based Fuzzy Multi-objective Robust Design

Hong-Zhong Huang, Li-Ping He, Huan-Wei Xu, 2009, J. Multiple Valued Log. Soft Comput..

A fuzzy set based solution method for multiobjective optimal design problem of mechanical and structural systems using functional-link net

Ping Wang, Weidong Wu, Hong-Zhong Huang, 2006, Neural Computing & Applications.

A Data-Driven Approach to Selecting Imperfect Maintenance Models

Hong-Zhong Huang, Xiaoling Zhang, Yu Liu, 2012, IEEE Transactions on Reliability.

Collaborative Reliability Analysis under the Environment of Multidisciplinary Design Optimization

Wei Yuan, Hong-Zhong Huang, Xiaoling Zhang, 2011, Concurr. Eng. Res. Appl..

Bearing Fault Diagnosis Using Singular Value Decomposition and Hidden Markov Modeling

Hong-Zhong Huang, Dong Wang, Rui Sun, 2009 .

Speed reducer multidisciplinary design optimization based on uncertainty analysis

Lei Liu, Hong-Zhong Huang, Huanwei Xu, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

A general energy-based model for fatigue life prediction of high-temperature structural materials

Hong-Zhong Huang, Yuanjian Yang, Qiang Liao, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Remaining useful life estimation for degradation and shock processes

Zheng Liu, Hong-Zhong Huang, Yu Liu, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Bayesian framework for probabilistic low cycle fatigue life prediction and uncertainty modeling of aircraft turbine disk alloys

Hong-Zhong Huang, Mohammad Modarres, Liping He, 2013 .

Application of FMECA and FTA in the fault diagnosis for diesel engine

Hong-Zhong Huang, Yu Liu, Le Yu, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Simulation of civil aircraft emergency evacuation account for physical attributes of passengers

Hong-Zhong Huang, Yu Liu, Weijie Wang, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Analysis of fatigue strength of rail axle-steel based on possibility theory

Zheng Liu, Hong-Zhong Huang, Huanwei Xu, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

A Simulation Method to Estimate Two Types of Time-Varying Failure Rate of Dynamic Systems

Hong-Zhong Huang, Zissimos P. Mourelatos, Zhonglai Wang, 2016 .

An integrated product and process development model supporting entire life cycle

Hong-Zhong Huang, Ying-Kui Gu, 2004, 8th International Conference on Computer Supported Cooperative Work in Design.

Sequential preventive maintenance policies with consideration of random adjustment-reduction features

Yu Liu, Weiwen Peng, Hong-Zhong Huang, 2015 .

An optimal sequential preventive maintenance policy under stochastic maintenance quality

Hong-Zhong Huang, Yu Liu, Yan-Feng Li, 2011 .

Thermal Cycling Life Prediction of Sn-3.0Ag-0.5Cu Solder Joint Using Type-I Censored Data

Weiwen Peng, Hong-Zhong Huang, Jinhua Mi, 2014, TheScientificWorldJournal.

Probabilistic Modeling of Damage Accumulation for Fatigue Reliability Analysis

Hong-Zhong Huang, Qiang Liu, Shun-Peng Zhu, 2017 .

Bayesian Degradation Analysis With Inverse Gaussian Process Models Under Time-Varying Degradation Rates

Weiwen Peng, Hong-Zhong Huang, Yuanjian Yang, 2017, IEEE Transactions on Reliability.

An E-Bayesian estimation for reliability assessment of a success-failure type device

Hong-Zhong Huang, Xue-Hai Wu, Yi-Chao Yin, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Fuzzy Dynamic Fault Tree Analysis of Hydraulic System of CNC Machining Center

Hong-Zhong Huang, Yu Liu, Jian Sun, 2011 .

Bayesian reliability analysis for fuzzy lifetime data

Hong-Zhong Huang, Ming Jian Zuo, Zhan-Quan Sun, 2006, Fuzzy Sets Syst..

Reliability analysis of direct drive electrohydraulic servo valves based on a wear degradation process and individual differences

Weiwen Peng, Hong-Zhong Huang, Debiao Meng, 2014 .

Probabilistic PoF-based framework for fatigue life prediction of aircraft gas turbine discs

Weiwen Peng, Sankaran Mahadevan, Hong-Zhong Huang, 2016 .

Interaction balance optimization in multidisciplinary design optimization problems

Hong-Zhong Huang, Yuanjian Yang, Xiaoling Zhang, 2016, Concurr. Eng. Res. Appl..

Psychological Information Entropy and Its Applications to Reliability Engineering

Hong-Zhong Huang, Haiqing Li, Gui-Bao Wang, 2009 .

Bayesian information fusion for non-competing relationship degradation process

Hong-Zhong Huang, Jie Zhou, Yan-Feng Li, 2018 .

Optimization of multi-state elements replacement policy for multi-state systems

Yu Liu, Hong-Zhong Huang, 2010, 2010 Proceedings - Annual Reliability and Maintainability Symposium (RAMS).

Robust Reliability Analysis of Vibration Components

Hong-Zhong Huang, Ming J. Zuo, Yong-Hua Li, 2004 .

Applying FAHP to safety and risk assessment of CNC spindle system based on Hilbert space

Hong-Zhong Huang, Chuang Yin, Liping He, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

An interactive fuzzy multi-objective optimization method for engineering design

Hong-Zhong Huang, Xiaoping Du, Ying-Kui Gu, 2006, Eng. Appl. Artif. Intell..

Intelligent interactive multiobjective optimization method and its application to reliability optimization

Hong-Zhong Huang, Ming J. Zuo, Zhigang Tian, 2005 .

Optimization of partial software rejuvenation policy

Hong-Zhong Huang, Gregory Levitin, Liudong Xing, 2019, Reliab. Eng. Syst. Saf..

An improved Corten-Dolan’s model based on damage and stress state effects

Zhiqiang Lv, Hong-Zhong Huang, Huiying Gao, 2015 .

A Bidirectional LSTM Prognostics Method Under Multiple Operational Conditions

Hong-Zhong Huang, Yan-Feng Li, Cheng-Geng Huang, 2019, IEEE Transactions on Industrial Electronics.

Reliability Analysis of Aircraft Servo-Actuation Systems Using Evidential Networks

Hong-Zhong Huang, Rui Sun, Hu Wan, 2012 .

Probabilistic modeling of damage accumulation for fatigue reliability analysis

Hong-Zhong Huang, Qiang Liao, Li-Ping He, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Notice of RetractionMultidisciplinary design optimization based on physical programming

Lei Liu, Hong-Zhong Huang, Huanwei Xu, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Fault tree analysis oF train rear-end collision accident considering common cause Failure analiZ a drZe Wa usZK odZeŃ dla KoliZJi tylne J cZĘŚci sKŁ adu PociĄ gu Z uWZ glĘdnieniem usZK odZenia sPo Wodo Wanego WsPÓlnĄ PrZ ycZ ynĄ

Hong-Zhong Huang, Yan-Feng Li, Shun-Peng Zhu, 2013 .

An interactive preference-based evolutionary algorithm for multi-criteria satisficing optimization

Hong-Zhong Huang, Ye Tao, Yan-Feng Li, 2018, J. Intell. Fuzzy Syst..

System Optimization Design Under Time Variant Reliability Constraints

Hong-Zhong Huang, Zhonglai Wang, Xiaoling Zhang, 2011 .

Leveraging Degradation Testing and Condition Monitoring for Field Reliability Analysis With Time-Varying Operating Missions

Weiwen Peng, Hong-Zhong Huang, Yuanjian Yang, 2015, IEEE Transactions on Reliability.

Sequential optimization and reliability assessment for multidisciplinary design optimization under aleatory and epistemic uncertainties

Hong-Zhong Huang, Xudong Zhang, 2009 .

Metamodeling uncertainty quantification in multi-level engineering system design

Hong-Zhong Huang, Yu Liu, Xiaohu Zhang, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Optimal selective maintenance for multi-state systems under imperfect maintenance

Yu Liu, Hong-Zhong Huang, Ming J. Zuo, 2009, 2009 Annual Reliability and Maintainability Symposium.

Possibility-Based Multidisciplinary Design Optimization in the Framework of Sequential Optimization and Reliability Assessment

Hong-Zhong Huang, Xudong Zhang, Shengkui Zeng, 2009 .

A model to predict the residual life of aero-engine based upon Support Vector Machine

Hong-Zhong Huang, Di Wen, Zhong-Zhe Chen, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

A numerical model with age reduction factor for warm spare

Yu Liu, Tongdan Jin, Hong-Zhong Huang, 2011, International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

New Approaches to System Analysis and Design: A Review

Hong-Zhong Huang, Liping He, Hongzhong Huang, 2008 .

REAL-TIME COMPUTATION OF ELEMENT STIFFNESS MATRIX BASED ON BP NEURAL NETWORKS

Hong-Zhong Huang, Zhonglai Wang, J. Q. Xiong, 2012 .

Functional-Link Net Based Multiobjective Fuzzy Optimization

Ping Wang, Weidong Wu, Hong-Zhong Huang, 2005, ISNN.

Parameter Estimation for Weibull Distribution Using Support Vector Regression

Qiang Miao, Hong-Zhong Huang, Dan Ling, 2007 .

New evaluation methods for conceptual design selection using computational intelligence techniques

Hong-Zhong Huang, Yu Liu, Zhonglai Wang, 2013 .

Uncertainty estimation of reliability redundancy in complex systems based on the Cross-Entropy method

Xiaoling Zhang, Yu Liu, Hong-Zhong Huang, 2009 .

Reliability analysis of an electric control system based on type I censored test zero-failure data using Bayesian methods

Wei Guo, Hong-Zhong Huang, Jing Li, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Fuzzy preference based Interactive Fuzzy Physical Programming and its application in multi-objective optimization

Hong-Zhong Huang, Xu Zhang, Lanfeng Yu, 2006 .

Service-Life Assessment of Complex Dynamic Systems Under Interval Uncertainty Based on Bayesian Networks

Weiwen Peng, Hong-Zhong Huang, Jinhua Mi, 2015 .

Analysis and Evaluation of Reliability of Diesel Engine Based on Maintenance Records

Qiang Miao, Hong-Zhong Huang, Yu Liu, 2007 .

TOPOLOGY OPTIMIZATIONOFPIEZOELECTRICFORCE SENSOR

Hong-Zhong Huang, Cong Lu, 2008 .

Fuzzy Fault Tree Analysis of Railway Traffic Safety

Hong-Zhong Huang, Xu Yuan, Xin-Sheng Yao, 2000 .

Coordination Component Based on Petri Net for Collaborative Design

Hong-Zhong Huang, Feng Zhou, Xu Zu, 2004 .

A study on fatigue damage accumulation based on continuum damage mechanics

Hong-Zhong Huang, Yong Tang, Ningbo Liu, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Reliability analysis of phased mission system with non-exponential and partially repairable components

Hong-Zhong Huang, Yan-Feng Li, Xiang-Yu Li, 2018, Reliab. Eng. Syst. Saf..

A New Ordering Method of Basic Events in Fault Tree Analysis

Hong-Zhong Huang, Hua Zhang, Yanfeng Li, 2012, Qual. Reliab. Eng. Int..

A novel information fusion method based on Dempster-Shafer evidence theory for conflict resolution

Qiang Miao, Hong-Zhong Huang, Rui Sun, 2011, Intell. Data Anal..

Data-driven approach for imperfect maintenance model selection

Yu Liu, Hong-Zhong Huang, Xiaoling Zhang, 2011, 2011 Proceedings - Annual Reliability and Maintainability Symposium.

Modeling the Product Development Process as a Dynamic System with Feedback

Hong-Zhong Huang, Ying-Kui Gu, Jung Y. Choi, 2006, CONFENIS.

FMECA for aircraft electric system

Hong-Zhong Huang, Yuan Chen, Li Du, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Uncertainty Analysis in Fatigue Life Prediction of Gas Turbine Blades Using Bayesian Inference

Weiwen Peng, Hong-Zhong Huang, Jing Li, 2015 .

Dynamic error analysis for six degrees of freedom micro-displacement mechanism in reticle stage of lithography machine

Hong-Zhong Huang, Yu Liu, Jing Li, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Hopfield Network Based Optimization of Mechanical Design

Ping Wang, Hong-Zhong Huang, Xu Zhang, 2005, 2005 International Conference on Neural Networks and Brain.

Remaining useful life estimation under degradation and shock damage

Hong-Zhong Huang, Yu Liu, Yan-Feng Li, 2015 .

Posbist Reliability Theory of k-out-of-n: G System

Hong-Zhong Huang, Yanfeng Li, Yu Liu, 2010, J. Multiple Valued Log. Soft Comput..

An efficient fatigue-creep interaction life prediction model based on frequency separation and strain energy damage theory

Hong-Zhong Huang, Yu Liu, Haiqing Li, 2013, 2013 Proceedings Annual Reliability and Maintainability Symposium (RAMS).

A Bayesian approach for sealing failure analysis considering the non-competing relationship of multiple degradation processes

Weiwen Peng, Hong-Zhong Huang, Shun-Peng Zhu, 2016 .

Zastosowanie metody dekompozycji hierarchicznej do alokacji niezawodności w dużych systemach

Hong-Zhong Huang, Yu Liu, Xiaoling Zhang, 2009 .

Probabilistic Life Prediction for High Temperature Low Cycle Fatigue Using Energy-Based Damage Parameter and Accounting for Model Uncertainty

Hong-Zhong Huang, Mohammad Modarres, Liping He, 2011 .

Application of bullet elimination in reliability computation of standard complex system

Hong-Zhong Huang, Nan Li, Chun Nam Wong, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Reliability analysis of complex multi-state system with common cause failure based on evidential networks

Weiwen Peng, Hong-Zhong Huang, Jinhua Mi, 2018, Reliab. Eng. Syst. Saf..

Reliability analysis of CNC hydraulic system based on fuzzy fault tree

Weiwen Peng, Hong-Zhong Huang, Haiqing Li, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Fault diagnosis of rotating machinery based on kernel density estimation and Kullback-Leibler divergence

Fan Zhang, Hong-Zhong Huang, Yu Liu, 2014, Journal of Mechanical Science and Technology.

Weibull distributed TSDS analysis of aeroengine burner inner-liner using bi-variant LFP method

Hong-Zhong Huang, Yang Lu, Peng He, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

A framework for fatigue reliability analysis of high-pressure turbine blades

Hong-Zhong Huang, Jie Zhou, Yan-Feng Li, 2019 .

Security of Separated Data in Cloud Systems with Competing Attack Detection and Data Theft Processes

Hong-Zhong Huang, Gregory Levitin, Liudong Xing, 2018, Risk analysis : an official publication of the Society for Risk Analysis.

Probabilistic modeling of damage accumulation for time-dependent fatigue reliability analysis of railway axle steels

Hong-Zhong Huang, Yu Liu, Yan-Feng Li, 2015 .

Imprecise reliability assessment for heavy numerical control machine tools against small sample size problem

Zheng Liu, Hong-Zhong Huang, Yan-Feng Li, 2016 .

Probabilistic modeling of double linear damage accumulation for fatigue reliability analysis

Hong-Zhong Huang, Shun-Peng Zhu, Zhaochun Peng, 2016 .

Mean Stress and Ratcheting Corrections in Fatigue Life Prediction of Metals

Hong-Zhong Huang, Qiang Liu, Shun-Peng Zhu, 2016 .

Optimal Abort Rules for Multiattempt Missions.

Hong-Zhong Huang, Gregory Levitin, Maxim Finkelstein, 2019, Risk analysis : an official publication of the Society for Risk Analysis.

Optimal load distribution for multi-state systems under selective maintenance strategy

Hong-Zhong Huang, Yu Liu, Chujie Chen, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Determining the Walker exponent and developing a modified Smith-Watson-Topper parameter model

Hong-Zhong Huang, Zhiqiang Lv, Huiying Gao, 2016 .

Grid Service Reliability Modeling and Optimal Task Scheduling Considering Fault Recovery

Hong-Zhong Huang, Min Xie, Zhonglai Wang, 2011, IEEE Transactions on Reliability.

Chaotic transfer model of quality characteristics variation

Hong-Zhong Huang, Genbao Zhang, Xianlin Ren, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Scheduling of imperfect inspections for reliability critical systems with shock-driven defects and delayed failures

Hong-Zhong Huang, Gregory Levitin, Maxim Finkelstein, 2019, Reliab. Eng. Syst. Saf..

Comment on "A framework to practical predictive maintenance modeling for multi-state systems" by Tan C.M. and Raghavan N. [Reliab Eng Syst Saf 2008;93(8): 1138-50]

Hong-Zhong Huang, Yu Liu, Yu Liu, 2009, Reliab. Eng. Syst. Saf..

Structural topology optimization method considering reliability and corrosion

Hong-Zhong Huang, Bin Zheng, Huanwei Xu, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Reliability analysis of aircraft servo-actuation systems based on the evidential networks with imprecise information

Hong-Zhong Huang, Rui Sun, Hu Wan, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Reliability enhancement test of vertical voice-coil motor on wafer stage of lithography machine

Hong-Zhong Huang, Yu Liu, Zhisheng Zhang, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Stress Intensity Factor Calculation Using a Weight Function Method

Hong-Zhong Huang, Rui Sun, Qiming Ma, 2007 .

Evidence Relationship Matrix and Its Application to D-S Evidence Theory for Information Fusion

Qiang Miao, Hong-Zhong Huang, Xianfeng Fan, 2006, IDEAL.

A multi-team competitive optimization algorithm for bearing fault diagnosis

Hong-Zhong Huang, Bo Zheng, Xiaoling Zhang, 2016, 2016 Annual Reliability and Maintainability Symposium (RAMS).

Reliability analysis of satellite system with cold-standby components using sequential binary decision diagrams

Hong-Zhong Huang, Hang Zhou, Yan-Feng Li, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

MULTIPLE FAILURE MODES ANALYSIS AND WEIGHTED RISK PRIORITY NUMBER EVALUATION IN FMEA

Tongdan Jin, Hong-Zhong Huang, Liping He, 2011 .

Optimal preventive maintenance policy under fuzzy Bayesian reliability assessment environments

Yu Liu, Hong-Zhong Huang, Ming J. Zuo, 2010 .

Application of XML in computer supported collaborative design systems

Hong-Zhong Huang, Yi Yin, Xu Zu, 2004, 8th International Conference on Computer Supported Cooperative Work in Design.

Analiza niezawodnościowa mechanicznego elementu wibracyjnego z wykorzystaniem teorii zbiorów rozmytych

Hong-Zhong Huang, Y. F. Li, W. Wu, 2012 .

Optimal Replacement Policy for Multi-State System Under Imperfect Maintenance

Hong-Zhong Huang, Yu Liu, Yu Liu, 2010, IEEE Transactions on Reliability.

Part Reliability Design of Air-Cooled Turbine Blade Under Thermal Stress-Dependent Strength Using Polynomial Method

Hong-Zhong Huang, Jingqi Xiong, Chun Nam Wong, 2010 .

Bayesian degradation assessment of CNC machine tools considering unit non-homogeneity

Hong-Zhong Huang, Bo Zheng, Yan-Feng Li, 2018 .

Reliability-based design of a spindle based on random and interval variables

Weiwen Peng, Hong-Zhong Huang, Zhonglai Wang, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Optimal Design Accounting for Reliability, Maintenance, and Warranty

Hong-Zhong Huang, Xiaoping Du, Zhonglai Wang, 2010 .

A combined Bayesian framework for satellite reliability estimation

Weiwen Peng, Yu Liu, Hong-Zhong Huang, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

A Systematic Approach to the Reliability Analysis of an n-Unit Warm Standby System With k-Repair Facility

Yu Liu, Hong-Zhong Huang, Yu Pang, 2009 .

Notice of RetractionProbabilistic fatigue life prediction of turbine disc considering model parameters uncertainty

Hong-Zhong Huang, Liping He, Liangliang Ding, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Reliability analysis of elastic link mechanism based on BP Neural Network

Hong-Zhong Huang, Xiaoling Zhang, Zhonglai Wang, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Fuzzy Sets Method of Reliability Prediction and Its Application to a Turbocharger of Diesel Engines

Hong-Zhong Huang, Yu Liu, Yan-Feng Li, 2013 .

Optimal Redundancy Allocation of Multi-State Systems with Genetic Algorithms

Hong-Zhong Huang, Ming Jian Zuo, Zhigang Tian, 2007, Computational Intelligence in Reliability Engineering.

Dynamic precision reliability analysis for six degrees of freedom micro-displacement mechanism of reticle stage in lithography machine based on Monte-Carlo

Hong-Zhong Huang, Jing Li, Kesheng Wang, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Yu Liu, Hong-Zhong Huang, Zhong-Zhe Chen, 2011 .

A coordination method for fuzzy multi-objective optimization of system reliability

Weidong Wu, Hong-Zhong Huang, Chunsheng Liu, 2005, J. Intell. Fuzzy Syst..

Dynamic fault tree analysis based on continuous-time Bayesian networks under fuzzy numbers

Yu Liu, Hong-Zhong Huang, Jinhua Mi, 2015 .

CONSTRUCTION OF POSSIBILITY DISTRIBUTIONS FOR RELIABILITY ANALYSIS BASED ON POSSIBILITY THEORY

Hong-Zhong Huang, Ming J. Zuo, Xin Tong, 2004 .

NONLINEAR DYNAMIC SIMULATION OF COUPLED LATERAL-TORSIONAL VIBRATIONS OF A GEAR TRANSMISSION SYSTEM

Hong-Zhong Huang, Xianfeng Fan, Shaobin Li, 2006 .

Failure Mode and Effects Analysis of Compressor Blades of Aeroengines Using Dempster-Shafer Evidence Theory

Hong-Zhong Huang, Liping He, Shun-Peng Zhu, 2011 .

Hierarchical Colored Petri Nets based components for workflow systems

Qiang Miao, Hong-Zhong Huang, Feng Zhou, 2006 .

Optimizing maritime travel time reliability

Hong-Zhong Huang, Min Xie, Rajesh S Prabhu Gaonkar, 2013 .

A Review of Possibilistic Approaches to Reliability Analysis and Optimization in Engineering Design

Xu-Dong Zhang, Qiang Miao, Hong-Zhong Huang, 2007, HCI.

Hierarchical Timed Colored Petri Nets Based Product Development Process Modeling

Hong-Zhong Huang, Xu Zu, 2004, CSCWD.

Bayesian reliability evaluation method for the rotor

Qiang Miao, Hong-Zhong Huang, Bin Zheng, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Parameters determination for adaptive bathtub-shaped curve using artificial fish swarm algorithm

Hong-Zhong Huang, Yu Liu, Yi Chen, 2012, 2012 Proceedings Annual Reliability and Maintainability Symposium.

A Study of Product Development Time Based on Fuzzy Timed Workflow Net

Jun Hu, Hong-Zhong Huang, Xianfeng Fan, 2006, ICIC.

Reliability-based design optimization for box-booms considering strength degradation and random total working time

Xiaoling Zhang, Gang Li, Hong-Zhong Huang, 2012 .

Life cycle cost analysis for design optimization under uncertainty

Qiang Miao, Hong-Zhong Huang, Li Du, 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.

Notice of RetractionUncertainty analysis of correlated crack growth parameters using copula functions

Hong-Zhong Huang, Yuanjian Yang, Yu Liu, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Fatigue Reliability Analysis of Turbine Disk Alloy Using Saddlepoint Approximation

Hong-Zhong Huang, Yan-Feng Li, Shun-Peng Zhu, 2013 .

Reliability modelling and assessment of a heterogeneously repaired system with partially relevant recurrence data

Weiwen Peng, Hong-Zhong Huang, Narayanaswamy Balakrishnan, 2018, Applied Mathematical Modelling.

Optimal Replacement Policy for Fuzzy Multi-State Element

Hong-Zhong Huang, Yu Liu, Yu Liu, 2011, J. Multiple Valued Log. Soft Comput..

Fault diagnosis and risk control of aircraft electric system based on IAHP and Bayesian network

Hong-Zhong Huang, Chuang Yin, Liping He, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

An efficient approach to reliability-based design optimization within the enhanced sequential optimization and reliability assessment framework

Hong-Zhong Huang, Yu Liu, Xudong Zhang, 2013 .

An Approach to Determine the Test Intervals for CBM

Qiang Miao, Hong-Zhong Huang, Yu Liu, 2009 .

Stochastic fatigue life and reliability prediction based on residual strength

Hong-Zhong Huang, Shun-Peng Zhu, Huiying Gao, 2015 .

Reliability analysis for large mine excavator hoisting mechanism

Hong-Zhong Huang, Yan-Feng Li, Yong Zhou, 2016 .

A Probabilistic Framework for Low Cycle Fatigue Life Prediction and Uncertainty Modeling of Turbine Disk Alloys

Hong-Zhong Huang, Mohammad Modarres, Mohammad Modarres, 2013 .

Reliability evaluation of systems with degradation and random shocks

Hong-Zhong Huang, Yu Liu, Hoang Pham, 2008, 2008 Annual Reliability and Maintainability Symposium.

Concept optimization for mechanical product using Genetic Algorithm

Hong-Zhong Huang, Rui-Feng Bo, Xiang-Feng Fan, 2005 .

A New Method for Achieving Flexibility in Hierarchical Multilevel System Design

Hong-Zhong Huang, Xiaoling Zhang, Zhonglai Wang, 2011, Concurr. Eng. Res. Appl..

Neurocomputing method based on structural finite element analysis of discrete model

Hong-Zhong Huang, Wei Duan, Haibin Li, 2010, Neural Computing and Applications.

A Unified Framework for Integrated Optimization Under Uncertainty

Yu Liu, Hong-Zhong Huang, Zhonglai Wang, 2010 .

Notice of RetractionFatigue life analysis of an aero-engine with the measured load spectrum

Hong-Zhong Huang, Yuanjian Yang, Yan-Feng Li, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Topology optimization considering stress and reliability constraints

Hong-Zhong Huang, Bin Zheng, Tao Ma, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

A Joint Redundancy and Imperfect Maintenance Strategy Optimization for Multi-State Systems

Hong-Zhong Huang, Yuanjian Yang, Yanfeng Li, 2013, IEEE Transactions on Reliability.

Neurocomputing for Fuzzy Finite Element Analysis of Structures Based on Fuzzy Coefficient Programming

Hong-Zhong Huang, Hai-Bin Li, 2008, J. Multiple Valued Log. Soft Comput..

Binary decision diagram quantitative analysis method based on fuzzy set theory

Zheng Liu, Hong-Zhong Huang, Le Yu, 2016 .

Evidence Theory-Based Reliability Analysis and Optimization in Engineering Design

Hong-Zhong Huang, Li Du, Li-Ping He, 2007, DAC 2007.

Early Software Quality Prediction Based on a Fuzzy Neural Network Model

Hong-Zhong Huang, Lan Yao, Bo Yang, 2007, Third International Conference on Natural Computation (ICNC 2007).

A Modified Nonlinear Damage Accumulation Model for Fatigue Life Prediction Considering Load Interaction Effects

Hong-Zhong Huang, Rong Yuan, Shun-Peng Zhu, 2014, TheScientificWorldJournal.

Study on modeling and diagnosis of the satellite power system

Hong-Zhong Huang, Yu Liu, Kesheng Wang, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Evidential Networks for Fault Tree Analysis with Imprecise Knowledge

Hong-Zhong Huang, Jianping Yang, Yan-Feng Li, 2012 .

Apply degree of match & fuzzy rule based mode for FMECA in flight control system

Hong-Zhong Huang, Yu Liu, Yanfeng Li, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

The universal grey transfer matrix method and its application in calculating the natural frequencies of systems

Hong-Zhong Huang, Xianfeng Fan, You-Xin Luo, 2006 .

An improved robust design model based on hybrid response surface optimization strategy

Hong-Zhong Huang, Huanwei Xu, Zhonglai Wang, 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.

Application of Neural Network to Interactive Physical Programming

Hong-Zhong Huang, Zhigang Tian, 2005, ISNN.

Probabilistic fatigue life prediction considering the uncertainty of S-N curve

Hong-Zhong Huang, Yu Pang, Huiying Gao, 2018 .

Notice of RetractionA failure rate model analysis for repairable system

Hong-Zhong Huang, Yu Liu, Wei Peng, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Petri Net-based Coordination Component for Collaborative Design

Hong-Zhong Huang, Xu Zu, Huan-Wei Xu, 2010, Concurr. Eng. Res. Appl..

An Approach to Reliability Assessment Under Degradation and Shock Process

Hong-Zhong Huang, Yanfeng Li, Zhonglai Wang, 2011, IEEE Transactions on Reliability.

Interaction prediction optimization in multidisciplinary design environment

Hong-Zhong Huang, Hua Zhang, Xiao-Ling Zhang, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Reliability-Based Multidisciplinary Design Optimization Using Subset Simulation Analysis and its Application in the Hydraulic Transmission Mechanism Design

Xiaoling Zhang, Yu Liu, Hong-Zhong Huang, 2014 .

An Interactive Preference-Weight Genetic Algorithm for Multi-criterion Satisficing Optimization

Bo Yang, Hong-Zhong Huang, Ye Tao, 2006, ICNC.

Development Mode Based on Integration of Product Models and Process Models

Hong-Zhong Huang, Ying-Kui Gu, 2006, Concurr. Eng. Res. Appl..

Multidisciplinary design optimization with discrete and continuous variables of various uncertainties

Hong-Zhong Huang, Xudong Zhang, Huanwei Xu, 2010 .

A Bayesian Approach for System Reliability Analysis With Multilevel Pass-Fail, Lifetime and Degradation Data Sets

Weiwen Peng, Hong-Zhong Huang, Yuanjian Yang, 2013, IEEE Transactions on Reliability.

Analysis of maintenance policies for finite life-cycle multi-state systems

Hong-Zhong Huang, Jun Wu, Min Xie, 2010, Comput. Ind. Eng..

Finite Element Analysis of Structures Based on Linear Saturated System Model

Hong-Zhong Huang, Mingyang Zhao, Hai-Bin Li, 2004, ISNN.

Uncertainty quantification in fatigue lifetime data analysis: a possibilistic approach

Hong-Zhong Huang, Shun-Peng Zhu, Dan Ling, 2013 .

A Practical Method for Determining the Corten-Dolan Exponent and Its Application to Fatigue Life Prediction

Hong-Zhong Huang, Yu Liu, Qiang Liao, 2012 .

Reliability analysis on competitive failure processes under fuzzy degradation data

Hong-Zhong Huang, Li Du, Zhonglai Wang, 2011, Appl. Soft Comput..

Reliability analysis of multi-state systems with common cause failure based on Bayesian Networks

Hong-Zhong Huang, Yu Liu, Xiaoling Zhang, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Reliability-Redundancy Allocation for Multi-State Series-Parallel Systems

Hong-Zhong Huang, Ming Jian Zuo, Zhigang Tian, 2008, IEEE Transactions on Reliability.

Time and Error Analysis of Neurocomputing of Finite Element

Hong-Zhong Huang, Jun Zhang, Dao-Heng Sun, 2005, 2005 International Conference on Neural Networks and Brain.

Predictive analytics using a nonhomogeneous semi-Markov model and inspection data

Yu Liu, Hong-Zhong Huang, Ming J. Zuo, 2015 .

Application of QMU to structural analysis considering uncertainty

Hong-Zhong Huang, Chao-Yang Xie, Fa-Yuan Wei, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Weighted Fuzzy Risk Priority Number Evaluation of Turbine and Compressor Blades Considering Failure Mode Correlations

Hong-Zhong Huang, Yan-Feng Li, Shun-Peng Zhu, 2014 .

Hierarchical decomposition for optimal reliability allocation

Yu Liu, Hong-Zhong Huang, Xiao-Ling Zhang, 2009, 2009 Annual Reliability and Maintainability Symposium.

Satellite reliability modeling with modified Weibull extension distribution

Weiwen Peng, Hong-Zhong Huang, Yu Liu, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Fault diagnosis method based on supervised particle swarm optimization classification algorithm

Hong-Zhong Huang, Wei Guo, Bo Zheng, 2018, Intell. Data Anal..

Fault tree analysis of train rear-end collision accident considering common cause failure

Hong-Zhong Huang, Jinhua Mi, Yan-Feng Li, 2013 .

Product Quality Evaluation Method Based on Product Gene Theory

Hong-Zhong Huang, He Li, Peng Huang, 2018 .

Design FMEA for a diesel engine using two risk priority numbers

Hong-Zhong Huang, Yu Liu, Wei Song, 2012, 2012 Proceedings Annual Reliability and Maintainability Symposium.

Multi-objective design optimization for a two-stage transmission system under heavy load condition

Tongdan Jin, Hong-Zhong Huang, Bo Zheng, 2018 .

RAOGA-Based Fuzzy Neural Network Model of Design Evaluation

Jun Hu, Qiang Miao, Hong-Zhong Huang, 2006, ICIC.

Reliability-Based Lifecycle Optimization with Maintenance Consideration

Hong-Zhong Huang, Xiaoping Du, Zhonglai Wang, 2008 .

A PMS-MMDD model for reliability assessment of multi-state phased-mission system

Enrico Zio, Hong-Zhong Huang, Li Xiangyu, 2018 .

Notice of RetractionRobust design of a gearbox transmission system based on maximal variation

Hong-Zhong Huang, Zhisheng Zhang, Huanwei Xu, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Reliability analysis of electrical system of computer numerical control machine tool based on bayesian networks

Weiwen Peng, Hong-Zhong Huang, Mei Jiang, 2016 .

Reliability estimation of milling head based on accelerated Bayesian degradation test

Weiwen Peng, Hong-Zhong Huang, Haiqing Li, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Fatigue lifetime assessment of aircraft engine disc based on multi-source information fusion

Hong-Zhong Huang, Zhisheng Zhang, Yan-Feng Li, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Reliability assessment of complex electromechanical systems under epistemic uncertainty

Weiwen Peng, Hong-Zhong Huang, Yuanjian Yang, 2016, Reliab. Eng. Syst. Saf..

Belief Universal Generating Function Analysis of Multi-State Systems Under Epistemic Uncertainty and Common Cause Failures

Hong-Zhong Huang, Yuanjian Yang, Jinhua Mi, 2015, IEEE Transactions on Reliability.

The Fuzzy-Logic-Based Reasoning Mechanism for Product Development Process

Weidong Wu, Hong-Zhong Huang, Chunsheng Liu, 2005, FSKD.

System Reliability Based Design Optimization with Monte Carlo simulation

Hong-Zhong Huang, Xiaoling Zhang, Zhiqiang Lv, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Posbist fault tree analysis of coherent systems

Hong-Zhong Huang, Ming Jian Zuo, Xin Tong, 2004, Reliab. Eng. Syst. Saf..

Probabilistic Physics of Failure-based framework for fatigue life prediction of aircraft gas turbine discs under uncertainty

Weiwen Peng, Sankaran Mahadevan, Hong-Zhong Huang, 2016, Reliab. Eng. Syst. Saf..

Analysis and study on BIT false alarm of flight control system in the sensing layer

Hong-Zhong Huang, Zhiqiang Lv, Zhean Gong, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Adaptive bathtub hazard rate curve modelling via transformed radial basis functions

Hong-Zhong Huang, Yi Chen, Bin Zheng, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Posbist Reliability Theory for Coherent Systems

Hong-Zhong Huang, Ming Jian Zuo, Xin Tong, 2007, Intelligence in Reliability Engineering.

Fuzzy Mapping Between Physical Domain And Function Domain In Design Process

Hong-Zhong Huang, Ying-Kui Gu, 2004, Int. J. Uncertain. Fuzziness Knowl. Based Syst..

Reliability assessment of phased-mission systems under random shocks

Enrico Zio, Hong-Zhong Huang, Yan-Feng Li, 2018, Reliab. Eng. Syst. Saf..

Condition-Based Maintenance With Scheduling Threshold and Maintenance Threshold

Hong-Zhong Huang, Yuanjian Yang, Yan-Feng Li, 2016, IEEE Transactions on Reliability.

Optimal Selective Maintenance Strategy for Multi-State Systems Under Imperfect Maintenance

Hong-Zhong Huang, Yu Liu, Yu Liu, 2010, IEEE Transactions on Reliability.

Extensions of Bayesian Reliability Analysis by Using Imprecise Dirichlet Model

Zheng Liu, Hong-Zhong Huang, Jinhua Mi, 2015 .

Physics of failure-based reliability prediction of turbine blades using multi-source information fusion

Hong-Zhong Huang, He Li, Jie Zhou, 2018, Appl. Soft Comput..

Intelligent fault recognition strategy based on adaptive optimized multiple centers

Hong-Zhong Huang, Bo Zheng, Yan-Feng Li, 2018, Mechanical Systems and Signal Processing.

Fatigue life prediction under variable amplitude loading using a non-linear damage accumulation model

Hong-Zhong Huang, Shun-Peng Zhu, Zhiqiang Lv, 2015 .

JOINT OPTIMIZATION OF REDUNDANCY AND MAINTENANCE STAFF ALLOCATION FOR MULTI-STATE SERIES-PARALLEL SYSTEMS OPTYMALIZACJA ŁĄCZONA ALOKACJI NADMIAROWOŚCI ORAZ ALOKACJI PRACOWNIKÓW SŁUŻB UTRZYMANIA RUCHU W WIELOSTANOWYCH SYSTEMACH SZEREGOWO-RÓWNOLEGŁYCH

Yu Liu, Hong-Zhong Huang, Y. F. Li, 2012 .

RELIABILITY AND REDUNDANCY APPORTIONMENT OPTIMIZATION USING INTERACTIVE PHYSICAL PROGRAMMING

Hong-Zhong Huang, Zhigang Tian, Ying-Kui Gu, 2004 .

An approach to system reliability analysis with fuzzy random variables

Hong-Zhong Huang, Yu Pang, Yan-Feng Li, 2012 .

A bootstrap-based method for processing accelerated life test data

Yu Liu, Hong-Zhong Huang, Haiqing Li, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Contact Stress Analysis of Gear of Crane Gearbox

Qiang Miao, Hong-Zhong Huang, Zhonglai Wang, 2007 .

Reliability assessment for fuzzy multi-state systems

Hong-Zhong Huang, Yu Liu, Yu Liu, 2010, Int. J. Syst. Sci..

Reliability assessment of ring-standby structure based on monte carlo simulation

Qiang Miao, Hong-Zhong Huang, Xiaojie Zhang, 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.

Multiobjective optimization of three-stage spur gear reduction units using interactive physical programming

Hong-Zhong Huang, Ming J. Zuo, Zhigang Tian, 2005 .

Reliability analysis of multi-state systems with common cause failures based on Bayesian network and fuzzy probability

Weiwen Peng, Yan-Feng Li, Hong-Zhong Huang, 2019, Ann. Oper. Res..

Notice of RetractionResidual lifetime prediction of a vehicle engine using fuzzy similarity analysis

Hong-Zhong Huang, Yu Liu, Zhisheng Zhang, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Multidisciplinary collaborative optimization using fuzzy satisfaction degree and fuzzy sufficiency degree model

Hong-Zhong Huang, Ye Tao, Yu Liu, 2008, Soft Comput..

First-Order Second-Moment based multidisciplinary design optimization

Hong-Zhong Huang, Bin Zheng, Huanwei Xu, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Probabilistic Low Cycle Fatigue Life Prediction Using an Energy-Based Damage Parameter and Accounting for Model Uncertainty

Hong-Zhong Huang, Mohammad Modarres, Liping He, 2012 .

Using neural network to predict reliability of lithography machine

Hong-Zhong Huang, Yu Liu, Longlong Zhang, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Modeling the Product Development Process as a Dynamic System with Feedback

Hong-Zhong Huang, Ying-Kui Gu, Hong-Zhong Huang, 2006, Concurr. Eng. Res. Appl..

A Modified Model for Non-Linear Fatigue Damage Accumulation With Load Interaction Effects

Hong-Zhong Huang, Zhiqiang Lv, Huiying Gao, 2015 .

Reliability analysis of a repairable parallel system with repair time omission

Yu Liu, Qiang Miao, Hong-Zhong Huang, 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.

A new fatigue damage accumulation model based on nonlinear continuum damage mechanics

Hong-Zhong Huang, Yu Liu, Haiqing Li, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Reliability-Based Multidisciplinary Design Optimization Using Subset Simulation Analysis and Its Application in the Hydraulic Transmission Mechanism Design

Yu Liu, Hong-Zhong Huang, Zhonglai Wang, 2014 .

A Bayesian Bivariate Degradation Analysis Method for Reliability Analysis of Heavy Duty Machine Tools

Weiwen Peng, Hong-Zhong Huang, Le Yu, 2015 .

Fatigue Life Estimation of an Aircaft Engine Under Different Load Spectrums

Hong-Zhong Huang, Ming J. Zuo, Qiang Liao, 2012 .

A Multiphase Decision Model for System Reliability Growth With Latent Failures

Tongdan Jin, Hong-Zhong Huang, Ying Yu, 2013, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

A Novel Hybrid System with Neural Networks and Hidden Markov Models in Fault Diagnosis

Qiang Miao, Hong-Zhong Huang, Xianfeng Fan, 2006, MICAI.

Modular Design and Its Application to Overhead Traveling Crane

Hong-Zhong Huang, Zhonglai Wang, Yan-Feng Li, 2009 .

Sequential Particle Swarm Optimization and Reliability Assessment of Planar-Type Voice Coil Motor

Xiaoling Zhang, Hong-Zhong Huang, Huanwei Xu, 2013 .

Notice of RetractionA study on vibration fatigue of engineering structures

Hong-Zhong Huang, Longlong Zhang, Shun-Peng Zhu, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

A new approach to the investigation of load interaction effects and its application in residual fatigue life prediction

Hong-Zhong Huang, Shun-Peng Zhu, Zhiqiang Lv, 2016 .

Design of maintenance outsourcing contracts considering fleet expansion

Tongdan Jin, Hong-Zhong Huang, Peng Wang, 2016, 2016 Annual Reliability and Maintainability Symposium (RAMS).

Approximate method for reliability assessment of complex phased mission systems

Hong-Zhong Huang, Hang Zhou, Xiangyu Li, 2017 .

Reliability assessment of wind turbine generators by fuzzy universal generating function

Hong-Zhong Huang, Tangfan Xiahou, Yan-Feng Li, 2021 .

A Markov regenerative process model for phased mission systems under internal degradation and external shocks

Hong-Zhong Huang, Xiaoyan Xiong, Yan-Feng Li, 2021, Reliab. Eng. Syst. Saf..

An adaptive hybrid evolutionary algorithm and its application in aeroengine maintenance scheduling problem

Hong-Zhong Huang, Jie Zhou, Yan-Feng Li, 2021, Soft Comput..

Combined TCD and HSV approach for probabilistic assessment of notch fatigue considering size effect

Hong-Zhong Huang, Shun-Peng Zhu, Ding Liao, 2021 .

Reliability analysis of solar array drive assembly by dynamic fault tree

Hong-Zhong Huang, Yan-Feng Li, Tudi Huang, 2021, Safety and Reliability Modeling and its Applications.

A novel deep convolutional neural network-bootstrap integrated method for RUL prediction of rolling bearing

Weiwen Peng, Hong-Zhong Huang, Cheng-Geng Huang, 2021, Journal of Manufacturing Systems.

A Monte Carlo Expectation Maximization Algorithm for Statistical Inference of Weibull Process with Left Censored Data

Hong-Zhong Huang, Jun-Ming Hu, 2021, IOP Conference Series: Materials Science and Engineering.

Measuring Conflicts of Multisource Imprecise Information in Multistate System Reliability Assessment

Hong-Zhong Huang, Tangfan Xiahou, Zhiguo Zeng, 2021, IEEE Transactions on Reliability.

Integrated production planning and preventive maintenance scheduling for synchronized parallel machines

Hong-Zhong Huang, Yu Liu, Qin Zhang, 2021, Reliab. Eng. Syst. Saf..

Positioning accuracy reliability analysis of industrial robots based on differential kinematics and saddlepoint approximation

Hong-Zhong Huang, Yan-Feng Li, He Li, 2021 .

Reliability Analysis of C4ISR Systems Based on Goal-Oriented Methodology

Hong-Zhong Huang, Yifan Li, Tingyu Zhang, 2021, Applied Sciences.

Part reliability design of centrifugal nozzle under thermal stress-dependent strength using polynomial method

Hong-Zhong Huang, Chun Nam Wong, Yang Lu, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

An efficient method for reliability evaluation of multistate networks given all minimal path vectors

Hong-Zhong Huang, Ming J. Zuo, Zhigang Tian, 2007 .

Possibility and Evidence-Based Reliability Analysis and Design Optimization

Hong-Zhong Huang, Liping He, Ning-Cong Xiao, 2013 .

A generalized energy-based fatigue–creep damage parameter for life prediction of turbine disk alloys

Hong-Zhong Huang, Yu Liu, Liping He, 2012 .

System reliability modeling and analysis in the possibility context

Hong-Zhong Huang, Liping He, Zhiqiang Luo, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Bayesian inference of Weibull distribution based on probability encoding method

Weiwen Peng, Hong-Zhong Huang, Haiqing Li, 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

Singularity detection in machinery health monitoring using Lipschitz exponent function

Qiang Miao, Hong-Zhong Huang, Xianfeng Fan, 2007 .

The representations of fuzzy concepts based on the fuzzy matrix theory and the AFS theory

Hong-Zhong Huang, Liu Xiaodong, Hongzhong Huang, 2003, Proceedings of the 2003 IEEE International Symposium on Intelligent Control.

A Novel Reliability Analysis Method for Turbine Discs with the Mixture of Fuzzy and Probability-Box Variables

Hong-Zhong Huang, Huiying Gao, Yan-Feng Li, 2018, International Journal of Turbo & Jet-Engines.

Reliability analysis method in the presence of fuzziness attached to operating time

Hong-Zhong Huang, H.-Z. Huang, H. Huang, 1995 .

Fatigue Life Estimation Considering Damaging and Strengthening of Low amplitude Loads under Different Load Sequences Using Fuzzy Sets Approach

Hong-Zhong Huang, Shun-Peng Zhu, Zhonglai Wang, 2011 .

Fault Tree Analysis Based on Fuzzy Logic

Hong-Zhong Huang, Li-Ping He, M.J. Zuo, 2007, 2007 Annual Reliability and Maintainability Symposium.

Unified uncertainty analysis by the extension universal generating functions

Hong-Zhong Huang, Ning-Cong Xiao, Zhonglai Wang, 2012, 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

An Equivalent Method for Fuzzy Reliability Analysis

Hong-Zhong Huang, Huiying Gao, Xiaoqiang Zhang, 2018, 2018 Annual Reliability and Maintainability Symposium (RAMS).

A novel method for measuring the dissimilarity degree between two pieces of evidence in Dempster-Shafer evidence theory

Hong-Zhong Huang, Hongzhong Huang, Liping He, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

A method for parameter estimation of Mixed Weibull distribution

Hong-Zhong Huang, Dan Ling, Yu Liu, 2009, 2009 Annual Reliability and Maintainability Symposium.

The Use of High-Performance Fatigue Mechanics and theExtended Kalman / Particle Filters, for Diagnostics andPrognostics of Aircraft Structures

Hong-Zhong Huang, Satya N. Atluri, Leiting Dong, 2015 .

A NONPROBABILISTIC SET MODEL OF STRUCTURAL RELIABILITY BASED ON SATISFACTION DEGREE OF INTERVAL

Hong-Zhong Huang, Liping He, Ning-Cong Xiao, 2011 .

Bayesian reliability assessment of gear lifetime under fuzzy environments

Hong-Zhong Huang, Zhan-Quan Sun, M. Zuo, 2005, Annual Reliability and Maintainability Symposium, 2005. Proceedings..

Notice of RetractionA novel dynamic fault tree analysis method

Hong-Zhong Huang, Shun-Peng Zhu, Ning-Cong Xiao, 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Mean stress effect correction in strain energy-based fatigue life prediction of metals

Weiwen Peng, Hong-Zhong Huang, Shun-Peng Zhu, 2017 .

Reliability assessment for systems suffering common cause failure based on Bayesian networks and proportional hazards model

Hong-Zhong Huang, Hong-Zhong Huang, Jinhua Mi, 2020, Qual. Reliab. Eng. Int..

A New Ductility Exhaustion Model for High Temperature Low Cycle Fatigue Life Prediction of Turbine Disk Alloys

Hong-Zhong Huang, Ming J. Zuo, Haiqing Li, 2011 .

A unified criterion for fatigue–creep life prediction of high temperature components

Hong-Zhong Huang, Shun-Peng Zhu, Zhiqiang Lv, 2017 .

A Novel Energy-Critical Multiaxial Fatigue Life Prediction for Low Cycle Fatigue under Mixed-Mode Loading

Hong-Zhong Huang, He Li, Hongzhong Huang, 2018, Metals.

A Novel Viscosity-Based Model for Low Cycle Fatigue–Creep Life Prediction of High-Temperature Structures

Hong-Zhong Huang, Liping He, Shun-Peng Zhu, 2012 .