Tsunemoto Kuriyagawa

发表

Using Smoothed Particle Hydrodynamics to Examine Influence of Process Parameters on Ultrasonic Machining

Jingsi Wang, Keita Shimada, Masayoshi Mizutani, 2014, International Journal of Automation Technology.

Effect of Crystal Structure on Fabrication of Fine Periodic Surface Structures with Short Pulsed Laser

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2018, Int. J. Autom. Technol..

Fabrication and Control of Fine Periodic Surface Structures by Short Pulsed Laser

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2016, Int. J. Autom. Technol..

Statistical Analysis for Evaluating Surface Roughness of Plane Honing

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2014, Int. J. Autom. Technol..

310 Straightness error measurement of an ultra-precision aspheric grinding machine : Straightness and rolling error measurement of slide table

Yoshikazu Arai, Wei Gao, Tsunemoto Kuriyagawa, 2004 .

Nano-topography on axisymmetric aspherical ground surfaces

Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Katsuo Syoji, 2006, Int. J. Manuf. Technol. Manag..

Development of Meso-Micro Mechanical Manufacturing (M^4) Technology

Yuta Yaguchi, Tsunemoto Kuriyagawa, Jun Shimizu, 2002 .

Editorial: Biomedical Applications

Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2017, Int. J. Autom. Technol..

Measurement of the Straightness of a Leadscrew-Driven Precision Stage

Yoshikazu Arai, Tsunemoto Kuriyagawa, Wei Gao, 2005 .

Friction Reduction by Micro-Textured Surfaces in Lubrication

Yue Sun, Keita Shimada, Masayoshi Mizutani, 2018, Int. J. Autom. Technol..

Fabrication of Precision Micrograting on Resin Substrate Utilizing Ultrasonic-Assisted Molding

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2015, Int. J. Autom. Technol..

Recent Nano-Precision Ductile Machining Technology for Advanced Optical Applications

Tsunemoto Kuriyagawa, Jiwang Yan, 2006 .

Minimizing Burrs and Defects on Microstructures with Laser Assisted Micromachining Technology

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2016, Int. J. Autom. Technol..

Characteristics of Thick Film Deposition in Powder Jet Machining

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2013, International Journal of Automation Technology.

Material Removal During Ultrasonic Machining Using Smoothed Particle Hydrodynamics

Jingsi Wang, Keita Shimada, Masayoshi Mizutani, 2013, Int. J. Autom. Technol..

Wheel curve generation error of aspheric microgrinding in parallel grinding method

Tsunemoto Kuriyagawa, Sun-Kyu Lee, Yeon Hwang, 2006 .

Study of precision micro-Electro-Discharge Machining (1st Report)-Examination the effect of RC circuit components on minimization material removal per discharge-

Tsunemoto Kuriyagawa, Takeshi Masaki, 2009 .

Straightness Error Measurement of an Ultra-precision Aspheric Grinding Machine (2nd report) : On-machine Experiments

Yoshikazu Arai, Tsunemoto Kuriyagawa, Satoshi Kiyono, 2004 .

Development of an Ultrasonically-Assisted Electrolytic Grinding System

Satoshi Kobayashi, Keita Shimada, Tsunemoto Kuriyagawa, 2013, International Journal of Automation Technology.

Porosity and Tensile Properties of Rhizoid Porous Structure Fabricated Using Selective Laser Melting

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2020, Int. J. Autom. Technol..

Evaluating the viscoelastic properties of glass above transition temperature for numerical modeling of lens molding process

Tsunemoto Kuriyagawa, Tianfeng Zhou, Jiwang Yan, 2007, Applied Optics and Photonics China.

Effect of Nanoparticle Lubrication in Diamond Turning of Reaction-Bonded SiC

Zhiyu Zhang, Tsunemoto Kuriyagawa, Jiwang Yan, 2011, Int. J. Autom. Technol..

Analysis of machinable structures and their wettability of rotary ultrasonic texturing method

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2016 .

Profile error compensation approaches for parallel nanogrinding of aspherical mould inserts

Tsunemoto Kuriyagawa, Han Huang, W. K. Chen, 2007 .

Design of an Ultrasonic Elliptic-Vibration Shoe and Its Performance in Ultrasonic Elliptic-Vibration-Shoe Centerless Grinding

Masana Kato, Yongbo Wu, Tsunemoto Kuriyagawa, 2004 .

Manufacturing technologies toward extreme precision

Tsunemoto Kuriyagawa, Jiwang Yan, Zhiyu Zhang, 2019, International Journal of Extreme Manufacturing.

Investigation into electrorheological fluid-assisted polishing

Ji Zhao, Tsunemoto Kuriyagawa, Lei Zhang, 2005 .

REAL TIME MONITORING OF CENTERLESS GRINDING PROCESS USING WAVELET TRANSFORM

Tsunemoto Kuriyagawa, Yongbo Wu, Katsuo Syoji, 1999 .

Study of precision micro-Electro-Discharge Machining (2nd Report) : The development of the advanced micro-EDM device

Tsunemoto Kuriyagawa, Takeshi Masaki, 2009 .

A New Centerless Grinding Technique without Employing a Regulating Wheel

Jun Wang, Tsunemoto Kuriyagawa, Yongbo Wu, 2003 .

Improvement of Machined Surface Flatness in Ultra-Precision Plane Honing

Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Shinya Suzuki, 2003 .

Study on ultra precision plane honing

Tsunemoto Kuriyagawa, Katsuo Syoji, Shinya Suzuki, 2004 .

Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2013, Int. J. Autom. Technol..

A Study of Ultrsonic Elliptic Vibrating Shoe Type Centerless Grinding:Influence of the Ultrsonic Elliptic Vibration of Shoe on the Workpiece Motions

Masana Kato, Tsunemoto Kuriyagawa, Yongbo Wu, 2003 .

Effects of Pulse Duration and Heat on Laser-Induced Periodic Surface Structures

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2020, Int. J. Autom. Technol..

Development of an Ultra-High Speed Cutting Wheel

Tsunemoto Kuriyagawa, Katsuo Syoji, Shigekazu Yamazaki, 2003 .

Committee for Nano—Precision Mechanical Machining & Manufacturing

Tsunemoto Kuriyagawa, Hirofumi Hidai, 2010 .

Investigation of centerless grinding (1st report) : Grinding force measurement

Yongbo Wu, Tsunemoto Kuriyagawa, Katsuo Syoji, 1999 .

Investigation into micro abrasive intermittent jet machining

Ji Zhao, Tsunemoto Kuriyagawa, Lei Zhang, 2005 .

Development of an ultrasonic elliptic-vibration shoe centerless grinding technique

Tsunemoto Kuriyagawa, Yongbo Wu, M. Kato, 2004 .

Ultrasonic-Assisted Face Milling for Fabricating Hierarchical Microstructures

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2020, Int. J. Autom. Technol..

Ultra-Precision Arc Truing and Dressing of Diamond Wheels for Aspheric Mirror Grinding

Tsunemoto Kuriyagawa, Toru Tachibana, Katsuo Syoji, 1997 .

Influence of Workpiece Materials on the Characteristics of the Layers by Electrical Discharge Coating

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2016, International Journal of Automation Technology.

Development of an AFM-Based System for In-Process Measurement of Micro-Defects on Machined Surfaces

Gao Wei, Tsunemoto Kuriyagawa, Satoshi Kiyono, 1999 .

Unidirectional Wetting Surfaces Fabricated by Ultrasonic-Assisted Cutting

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2019, Int. J. Autom. Technol..

Editorial: Laser-Based/Assisted Manufacturing

Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2020, Int. J. Autom. Technol..

Ultra-precision plane honing of AIN

Shinya Suzuki, Tsunemoto Kuriyagawa, Nobuhito Yoshihara, 2004 .

Ultraprecision Glass Molding Press for Microgrooves with Different Pitch Sizes

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2013, Int. J. Autom. Technol..

Development of Non-Destructive Technology for Detecting Grinding Burns

Tsunemoto Kuriyagawa, Ryo Ito, Shinji Murakami, 2013, Int. J. Autom. Technol..

Development of Desktop 4-axes Machine Tools

Weimin Lin, Tsunemoto Kuriyagawa, Hitoshi Ohmori, 2005 .

Effect of Tool Segmentation in Ultrasonic Machining - Studies of Ultrasonic Die Sinking -

Osamu Saito, Tsunemoto Kuriyagawa, 2005 .

Electrorheological fluid-assisted polishing of WC micro aspherical glass moulding dies

Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Tsuyoshi Kaku, 2006, Int. J. Manuf. Technol. Manag..

Ultrasonic-Assisted Grinding of Ultra-High Purity SUS 316L

Keita Shimada, Tsunemoto Kuriyagawa, Hideshi Tezuka, 2011, Int. J. Autom. Technol..

CFD Analysis of Friction-Reduction Effect of Micro-Textured Surfaces in Lubricant

Yue Sun, Keita Shimada, Masayoshi Mizutani, 2018, Int. J. Autom. Technol..

Study on the Creation of Fine Periodic Structure on V-Shaped Groove with Short-Pulsed Laser

Kristian Arntz, Kai Winands, Keita Shimada, 2020, Int. J. Autom. Technol..

Effect of Ultrafine Bubbles on Pseudomonas Aeruginosa and Staphylococcus Aureus During Sterilization of Machining Fluid

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2021, Int. J. Autom. Technol..

Mechanism study on microgroove forming by ultrasonic vibration assisted hot pressing

Tsunemoto Kuriyagawa, Tianfeng Zhou, Xibin Wang, 2016 .

C24 Cutting Performance of a Single-crystalline Diamond Ball Endmill in Fabricating Micro Lens Arrays and Grooves(Ultra-precision machining)

Tsunemoto Kuriyagawa, Jiwang Yan, Zhiyu Zhang, 2009 .

Statistical Approach Optimizing Slant Feed Grinding

Keita Shimada, Tsunemoto Kuriyagawa, Tianfeng Zhou, 2012 .

Effects of Ultrasonic Vibration in Truing and Dressing of CBN Grinding Wheel Used for Internal Grinding of Small Holes

Tsunemoto Kuriyagawa, Yongbo Wu, T. Kuriyagawa, 2005 .

Tool wear control in diamond turning of high-strength mold materials by means of tool swinging

Tsunemoto Kuriyagawa, Jiwang Yan, Jiwang Yan, 2010 .

Nano precision on-machine profiling of curved diamond cutting tools using a white-light interferometer

Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Hiroyasu Baba, 2007 .

Development of Electrorheological Fluid Assisted Machining for 3-Dimensional Small Parts.

Tsunemoto Kuriyagawa, Katsuo Syoji, T. Kuriyagawa, 1999 .

Dose-dependent osteogenic effect of octacalcium phosphate on mouse bone marrow stromal cells.

Taisuke Masuda, Tsunemoto Kuriyagawa, Nobuhito Yoshihara, 2008, Tissue engineering. Part A.

Response of machining-damaged single-crystalline silicon wafers to nanosecond pulsed laser irradiation

Tsunemoto Kuriyagawa, Jiwang Yan, Jiwang Yan, 2007 .

A new grinding method for aspheric ceramic mirrors

Tsunemoto Kuriyagawa, Katsuo Syoji, T. Kuriyagawa, 1996 .

Nano-Topography Characterization of Axisymmetrical Aspherical Ground Surfaces

Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Katsuo Syoji, 2003 .

A New Diamond Turning Method for Fabrication of Convex Aspheric Surface on Hard Brittle Material

Tsunemoto Kuriyagawa, Katsuo Syoji, Jiwang Yan, 2002 .

Ultraprecision Machining Characteristics of Poly-Crystalline Germanium

Tsunemoto Kuriyagawa, Jun'ichi Tamaki, Akihiko Kubo, 2005 .

Investigation on the viscoelasticity of optical glass in ultraprecision lens molding process

Tsunemoto Kuriyagawa, Tianfeng Zhou, Jiwang Yan, 2009 .

Ductile-brittle transition at large negative tool rake angles

Tsunemoto Kuriyagawa, Katsuo Syoji, Jiwang Yan, 2000 .

Development of Micro Ultrasonic Abrasive Machining System

Tsunemoto Kuriyagawa, Katsuo Syoji, Osamu Saitoh, 2002 .

Advances in Abrasive Technology IX

Han Huang, Jun Wang, Zhengyi Jiang, 2007, Key Engineering Materials.

Modeling high-temperature glass molding process by coupling heat transfer and viscous deformation analysis

Tsunemoto Kuriyagawa, Tianfeng Zhou, Jiwang Yan, 2009 .

Precision machining of microstructures on electroless-plated NiP surface for molding glass components

Tsunemoto Kuriyagawa, Tianfeng Zhou, Jiwang Yan, 2009 .

Electrorheological fluid-assisted ultra-precision polishing for small three-dimensional parts

Tsunemoto Kuriyagawa, Katsuo Syoji, T. Kuriyagawa, 2002 .

Studies on Centerless Grinding (3rd Report). Evaluation Function of Grinding Conditions.

Tsunemoto Kuriyagawa, Toru Tachibana, Katsuo Syoji, 1999 .

Coolant Effects on Tool Wear in Machining Single-Crystal Silicon with Diamond Tools

Tsunemoto Kuriyagawa, Jiwang Yan, Tsutomu Ohta, 2008 .

Study on shaping spherical Poly Crystalline Diamond tool by Micro-electro-Discharge Machining and micro-grinding with the tool

Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Jiwang Yan, 2007 .

Determination of an Optimum Geometrical Arrangement of Workpiece in the Ultrasonic Elliptic-Vibration Shoe Centerless Grinding

Tsunemoto Kuriyagawa, Toru Tachibana, Katsuo Syoji, 2004 .

Fabrication of micro end mills by wire EDM and some micro cutting tests

Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Kazuyoshi Uchida, 2009 .

High-Efficiency and Ultra-precision Glass Molding of Aspherical Lens and Microstructures

Tsunemoto Kuriyagawa, Tianfeng Zhou, Jiwang Yan, 2012 .

Machining of Aspherical Molding Dies Utilizing Parallel Grinding Method.

Tsunemoto Kuriyagawa, Katsuo Syoji, Masaru Saeki, 2002 .

Study on electrorheological fluid assisted micro-aspherical polishing

Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Tsuyoshi Kaku, 2004 .

A New Device of Abrasive Jet Machining and Application to Abrasive Jet Printer

Tsunemoto Kuriyagawa, Katsuo Syoji, T. Kuriyagawa, 2001 .

Grinding Characteristic of Segmental Wheel —Studies on Creep Feed Grinding (4th Report) —

Tsunemoto Kuriyagawa, Seiki Matsui, Katsuo Syoji, 1986 .

Machining of micro aspherical mould inserts

Han Huang, Tsunemoto Kuriyagawa, T. Kuriyagawa, 2005 .

Defining the effects of cutting parameters on burr formation and minimization in ultra-precision grooving of amorphous alloy

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2017 .

Fabricating microgrooves with varied cross-sections by electrodischarge machining

Kazunori Uchida, Tsunemoto Kuriyagawa, Nobuhito Yoshihara, 2010 .

Crystallographic effect on subsurface damage formation in silicon microcutting

Tsunemoto Kuriyagawa, Jiwang Yan, Jiwang Yan, 2012 .

Nonaxisymmetric Aspheric Ceramic Mirror Machining Using Arc Envelope Grinding Method.

Tsunemoto Kuriyagawa, Toru Tachibana, Katsuo Syoji, 1997 .

Ductile regime turning at large tool feed

Tsunemoto Kuriyagawa, Katsuo Syoji, Jiwang Yan, 2002 .

Effects of tool edge radius on ductile machining of silicon: an investigation by FEM

Tsunemoto Kuriyagawa, Hongwei Zhao, Jiwang Yan, 2009 .

Control of short-pulsed laser induced periodic surface structures with machining - Picosecond laser micro/nanotexturing with ultraprecision cutting

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2019, Precision Engineering.

Effects of Grain Size and Concentration of Grinding Wheel in Ultrasonically Assisted Grinding

Tsunemoto Kuriyagawa, Takayuki Shibata, Takahiro Kawashima, 2008 .

Study on Precision Grinding of Micro Aspherical Surface. Feasibility Study of Micro Aspherical Surface by Inclined Rotational Grinding.

Tsunemoto Kuriyagawa, Katsuo Syoji, Hirofumi Suzuki, 1998 .

Microstructural and topographical changes of Ni-P plated moulds in glass lens pressing

Tsunemoto Kuriyagawa, Tianfeng Zhou, Jiwang Yan, 2009 .

Development of Wheel Spindle for Ultra-High Speed Surface Grinding Machine. Studies on Ultra-High Speed Grinding. (1st Report).

Tsunemoto Kuriyagawa, Katsuo Syoji, Yutaka Inada, 1996 .

Investigation on shape transferability in ultraprecision glass molding press for microgrooves

Tsunemoto Kuriyagawa, Tianfeng Zhou, Jiwang Yan, 2011 .

Form Mirror Grinding of Inner Race of Ceramic Bearing

Tsunemoto Kuriyagawa, Kunihiko Unno, Toru Tachibana, 1997 .

Micro grooving on single-crystal germanium for infrared Fresnel lenses

Tsunemoto Kuriyagawa, Jun'ichi Tamaki, Jiwang Yan, 2005 .

Development of polycrystalline Ni–P mold by heat treatment for glass microgroove forming

Tsunemoto Kuriyagawa, Ryuichi Kobayashi, Tianfeng Zhou, 2015 .

Investigation of wheel wear mechanisms during grinding optical glasses through statistical analysis of wheel topography

Yadong Gong, Tsunemoto Kuriyagawa, Tianfeng Zhou, 2012 .

Single-point diamond turning of CaF2 for nanometric surface

Tsunemoto Kuriyagawa, Jun'ichi Tamaki, Katsuo Syoji, 2004 .

Influence of land ratio and number of lands on grinding characteristic of segmental wheel - Studies on creep feed grinding. (5th report).

Tsunemoto Kuriyagawa, Seiki Matsui, Katsuo Shoji, 1987 .

Studies on Ultra-High Speed Grinding. (2nd Report). Development of Ultra-High Speed Surface Grinding Machine.

Tsunemoto Kuriyagawa, Akinori Yui, Kunihiko Unno, 1997 .

Theoretical Analysis of Blade Behavior in Outer-Blade Slicing. Effect of Side Relief Angle of Blade.

Toshirou Iyama, Tsunemoto Kuriyagawa, Masahiro Mizuno, 1994 .

Study on tool wear characteristics in diamond turning of reaction-bonded silicon carbide

Tsunemoto Kuriyagawa, Jiwang Yan, Zhiyu Zhang, 2011 .

High-efficiency machining of single-crystal germanium using large-radius diamond tools

Tsunemoto Kuriyagawa, Jiwang Yan, Tsutomu Ohta, 2007 .

Optimizing the fabrication process of a high-efficiency blazed grating through diamond scribing and molding

Tsunemoto Kuriyagawa, Sun-Kyu Lee, ChaBum Lee, 2010 .

A Novel Form Error Compensation Technique for Tungsten Carbide Mould Insert Machining Utilizing Parallel Grinding Technology

Tsunemoto Kuriyagawa, Katsuo Syoji, T. Kuriyagawa, 2004 .

B013 Surface Texturing and Wettability Evaluation of Zirconia Ceramics

Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, 2013 .

Advances in Abrasive Technology V

Han Huang, Zhengyi Jiang, Tsunemoto Kuriyagawa, 2003 .

Grinding Marks Generated on Axi-symmetric Aspherical Surface

Tsunemoto Kuriyagawa, Nobuhito Yoshihara, Katsuo Syoji, 2004 .

Effects of minimizing hydrodynamic pressure in ultra-precision mirror grinding

Tsunemoto Kuriyagawa, Yuji Miyamoto, Sun-Kyu Lee, 2004 .

Cutting performance of a single-crystalline diamond ball endmill in fabricating micro lens arrays and grooves

Tsunemoto Kuriyagawa, Jiwang Yan, Zhiyu Zhang, 2009 .