J. Franke

发表

Manufacturing cell for winding and assembling a segmented stator of PM-synchronous machines for hybrid vehicles

B. Bickel, J. Franke, T. Albrecht, 2012, 2012 2nd International Electric Drives Production Conference (EDPC).

Energy-efficient production strategies and technologies for electric drives

J. Franke, S. Kreitlein, F. Risch, 2013, 2013 IEEE International Conference on Industrial Technology (ICIT).

Worker information system to support during complex and exhausting assembly of high-voltage harness

J. Franke, C. Fischer, J. Bonig, 2015, 2015 5th International Electric Drives Production Conference (EDPC).

Methodical integration of assembly specific influences concerning high-voltage components into the virtual validation process

J. Franke, C. Fischer, J. Bonig, 2012, 2012 2nd International Electric Drives Production Conference (EDPC).

Influence of cutting edge on core loss induced through various manufacturing parameters

J. Franke, M. Schneider, M. Hubert, 2016, 2016 6th International Electric Drives Production Conference (EDPC).

Fully automated rotor inspection apparatus with high flexibility for permanent magnet synchronous motors using an improved hall sensor line array

J. Franke, A. Meyer, A. Heyder, 2015, 2015 5th International Electric Drives Production Conference (EDPC).

Geometry-based 6D-pose visual servoing system enabling accuracy improvements of industrial robots

J. Franke, A. Buschhaus, H. Griinsteudel, 2016, 2016 International Conference on Advanced Mechatronic Systems (ICAMechS).

Implementation of the needle winding technique for diamond coils

B. Bickel, J. Franke, A. Riedel, 2015, 2015 5th International Electric Drives Production Conference (EDPC).

Magnetic stray field measurement of magnetic specimen

J. Franke, A. Meyer, A. Heyder, 2016, 2016 6th International Electric Drives Production Conference (EDPC).

Comparison analysis of the magnetic field and the magnetic force inside of an electromagnetic actuator with the use of an armature measuring sensor

J. Franke, A. Meyer, A. Heyder, 2016, 2016 6th International Electric Drives Production Conference (EDPC).

Application and comparison of analytic accelerated test-models for lifetime prediction of a novel contacting method

J. Franke, S. Kreitlein, M. Spahr, 2016, 2016 IEEE 62nd Holm Conference on Electrical Contacts (Holm).

The Least Energy Demand Method as unique tool to evaluate and rate the energy efficiency of the electric drives production

J. Franke, S. Kreitlein, M. Spahr, 2016, 2016 6th International Electric Drives Production Conference (EDPC).

In-line strategies and methods to reduce balancing efforts within rotor production for electric drives

J. Franke, B. Hofmann, M. Masuch, 2016, 2016 6th International Electric Drives Production Conference (EDPC).

Experimental investigations of the needle winding technology regarding the influence of the wire guide geometry on the tensile wire force

J. Franke, C. Endisch, P. Stenzel, 2015, 2015 IEEE International Conference on Industrial Technology (ICIT).

Innovative processes and systems for the automated manufacture, assembly and test of magnetic components for electric motors

J. Franke, A. Kuhl, A. Dobroschke, 2011, 2011 1st International Electric Drives Production Conference.

Innovative developments for automated assembly and fixation of integrated permanent magnets in rotors of synchronous machines

J. Franke, A. Meyer, A. Mahr, 2015, 2015 5th International Electric Drives Production Conference (EDPC).

Simulation of orthocyclic windings using the linear winding technique

B. Bickel, J. Franke, M. Spahr, 2015, 2015 5th International Electric Drives Production Conference (EDPC).

Rotational cutting of lamination sheets for electrical machines

J. Franke, J. Tremel, J. Hackert, 2012, 2012 2nd International Electric Drives Production Conference (EDPC).

Production planning scenarios for manufacturing of electric drives

J. Franke, S. Kreitlein, J. Tremel, 2012, 2012 2nd International Electric Drives Production Conference (EDPC).

Development of a control system for a universal winding machine based on virtual path planning

J. Franke, B. Bickel, A. Mahr, 2017, 2017 7th International Electric Drives Production Conference (EDPC).

Failure dependent progression of contact resistance in thermal-shock testing of spring-clip contacts

J. Franke, M. Spahr, M. Friedlein, 2017, 2017 IEEE Holm Conference on Electrical Contacts.

Structural mechanic finite element analysis of the bend and torsion behavior of high-voltage cables

J. Franke, M. Spahr, C. Fischer, 2013, 2013 3rd International Electric Drives Production Conference (EDPC).

Method for vectorial robot movement determination enabling accuracy improvements

J. Franke, A. Buschhaus, N. Apel, 2015, 2015 International Conference on Control, Automation and Robotics.

Resonant method for the measurement of quality of laminated cores

J. Franke, M. Schneider, M. Schneider, 2015, 2015 5th International Electric Drives Production Conference (EDPC).

Full dynamic resolution low lower DA-Converters for flat panel displays

Josef A. Nossek, J. Franke, C. Saas, 2006 .

E|Benchmark — A pioneering method for process planning and sustainable manufacturing strategies for processes in the electric drives production

J. Franke, S. Kreitlein, A. Meyer, 2014, 2014 4th International Electric Drives Production Conference (EDPC).

Automated optimization of complex three-dimensional robot trajectories

J. Franke, A. Buschhaus, P. Reitinger, 2016, 2016 2nd International Conference on Control, Automation and Robotics (ICCAR).

Explicit FEM analysis of a new contacting method for electronic devices with novel wiring harnesses

J. Franke, M. Spahr, J. Bonig, 2015, 2015 IEEE 61st Holm Conference on Electrical Contacts (Holm).

Innovative needle winding method using curved wire guide in order to significantly increase the copper fill factor

J. Franke, P. Stenzel, P. Dollinger, 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

Needle winding for distributed round-wire-windings without the use of insulation disks

J. Franke, C. Endisch, P. Stenzel, 2014, 2014 4th International Electric Drives Production Conference (EDPC).

Capability of biopolymers in electronics manufacturing

J. Franke, R. Schramm, A. Reinhardt, 2012, 2012 35th International Spring Seminar on Electronics Technology.

Modified assembly systems and processes for the mounting of electro-optical components

J. Franke, D. Craiovan, 2009, 2009 IEEE International Symposium on Assembly and Manufacturing.

Explicit dynamics process simulation of linear coil winding for electric drives production

B. Bickel, J. Franke, M. Spahr, 2014, 2014 4th International Electric Drives Production Conference (EDPC).

Impact of the needle winding technology on the operational behavior of an asynchronous machine

J. Franke, C. Endisch, P. Stenzel, 2015, 2015 5th International Electric Drives Production Conference (EDPC).

Hall sensor line array for magnetic field inline measurements of PM-exited rotors

J. Franke, J. Tremel, J. Franke, 2012, 2012 2nd International Electric Drives Production Conference (EDPC).

Production concepts for inductive power transfer systems for electric vehicles

J. Franke, F. Risch, S. Guenther, 2012, 2012 2nd International Electric Drives Production Conference (EDPC).