Manuel Cabaleiro

发表

Analytical T-stub model for the analysis of clamps in structural metal joints

Manuel Cabaleiro, Belén Riveiro, B. Conde, 2017 .

HBIM for storing life-cycle data regarding decay and damage in existing timber structures

Manuel Cabaleiro, Hélder S. Sousa, Jorge M. Branco, 2020 .

Analysis and storage of the decay degree level, cracks and lack of material in timber built heritage for HBIM

Manuel Cabaleiro, Hélder S. Sousa, Jorge M. Branco, 2019 .

Analysis of steel connections with girder clamps according to the bolts preload

Manuel Cabaleiro, Belén Riveiro, J. C. Caamaño, 2019 .

Automated Inspection of Railway Tunnels' Power Line Using LiDAR Point Clouds

Manuel Cabaleiro, Mario Soilán, Ana Sánchez-Rodríguez, 2019, Remote. Sens..

First results on the combination of laser scanner and drilling resistance tests for the assessment of the geometrical condition of irregular cross-sections of timber beams

Manuel Cabaleiro, B. Conde, Hélder S. Sousa, 2018, Materials and Structures.

AUTOMATED CALIBRATION OF FEM MODELS USING LIDAR POINT CLOUDS

Manuel Cabaleiro, Belén Riveiro, B. Conde, 2018, The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences.

Tridimensional parametric model for prediction of structural safety of existing timber roofs using laser scanner and drilling resistance tests

Manuel Cabaleiro, Hélder S. Sousa, Jorge M. Branco, 2019 .

Algorithm for the analysis of the geometric properties of cross-sections of timber beams with lack of material from LIDAR data

Pedro Arias, Manuel Cabaleiro, Belén Riveiro, 2016 .

Algorithm for the analysis of deformations and stresses due to torsion in a metal beam from LIDAR data

Pedro Arias, Manuel Cabaleiro, Belén Riveiro, 2016 .

Analyzing the effective length of I cross-section beams in connections with girder clamps for totally removable, reusable and reconfigurable structures

Manuel Cabaleiro, Borja Conde, Cristina Carretero González, 2019 .

Diego González-Aguilera, Manuel Cabaleiro, Alberto Villarino, 2015 .

Algorithm for beam deformation modeling from LiDAR data

Pedro Arias, Manuel Cabaleiro, Belén Riveiro, 2015 .

Automatic 3D modelling of metal frame connections from LiDAR data for structural engineering purposes

Pedro Arias, Manuel Cabaleiro, Belén Riveiro, 2014 .

Automated processing of dense points clouds to automatically determine deformations in highly irregular timber structures

Manuel Cabaleiro, Belén Riveiro, J. C. Caamaño, 2017 .

Parameterization of Structural Faults in Large Historical Constructions for Further Structural Modelling Thanks to Laser Scanning Technology and Computer Vision Algorithms

Paulo B. Lourenço, Ana M. Sánchez, I. Puente, 2019, RILEM Bookseries.

Analysis of Stiffness of Clamped Joints versus Bolted Joints in Steel Structures by Means of Accelerometers and Shaking Table Tests

Manuel Cabaleiro, Carlos Moutinho, Cristina González-Gaya, 2021, Sensors.

Reliability-based structural assessment of a historical steel railway bridge

Manuel Cabaleiro, Belén Riveiro, Borja Conde, 2021, IABSE Congress, Ghent 2021: Structural Engineering for Future Societal Needs.

Automatic Identification and Geometrical Modeling of Steel Rivets of Historical Structures from Lidar Data

Manuel Cabaleiro, Borja Conde-Carnero, Ana Sánchez-Rodríguez, 2021, Remote. Sens..