Tom Craeghs

发表

Robust beam compensation for laser-based additive manufacturing

Maarten Moesen, Tom Craeghs, Jean-Pierre Kruth, 2011, Comput. Aided Des..

Online Quality Control of Selective Laser Melting

Jean-Pierre Kruth, Tom Craeghs, Stijn Clijsters, 2011 .

Rapid Manufacturing Research at the Catholic University of Leuven

Mohsen Badrossamay, Tom Craeghs, Evren Yasa, 2009 .

Design and prototyping of beam shapers to generate circular or square top-hat beams of different size for additive manufacturing applications

Hugo Thienpont, Tom Craeghs, Michael Vervaeke, 2020, Photonics Europe.

Topology optimization of support structure layout in metal-based additive manufacturing accounting for thermal deformations

Geert Lombaert, Mattias Schevenels, Tom Craeghs, 2020 .

Method and device for manufacturing a three dimensional construction

Tom Craeghs, Jean-Pierre Kruth, Frank Herzog, 2011 .

Detection of Process Failures in Layerwise Laser Melting with Optical Process Monitoring

Tom Craeghs, Jean-Pierre Kruth, Stijn Clijsters, 2012 .

In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system

Jean-Pierre Kruth, Tom Craeghs, Stijn Clijsters, 2014 .

Lattice structure design for additive manufacturing based on topology optimization

Stijn Donders, Laszlo Farkas, Tom Craeghs, 2017 .

Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring

Jean-Pierre Kruth, Tom Craeghs, Stijn Clijsters, 2011 .

Feedback control of Layerwise Laser Melting using optical sensors

Jean-Pierre Kruth, Tom Craeghs, Florian Bechmann, 2010 .

Enhanced dimensional measurement by fast determination and compensation of geometrical misalignments of X-ray computed tomography instruments

Wim Dewulf, Tom Craeghs, Simone Carmignato, 2018 .

The influence of a dynamically optimized galvano based laser scanner on the total scan time of SLM parts

Jan Swevers, Jean-Pierre Kruth, Tom Craeghs, 2013 .

Online monitoring and quality control of Selective Laser Melting using optical sensors

Jean-Pierre Kruth, Tom Craeghs, 2009 .

Consolidation of polymer powders by selective laser sintering

Gideon Levy, Jean-Pierre Kruth, Tom Craeghs, 2008 .

A pragmatic model for selective laser melting with evaporation

Tom Craeghs, Frederik Verhaeghe, Lieven Pandelaers, 2009 .

Quality control of laser- and powder bed-based Additive Manufacturing (AM) technologies

Jean-Pierre Kruth, Tom Craeghs, Stefan Lindner, 2010 .

A W‐band waveguide fabricated using selective laser melting

Tom Craeghs, Philip Bleys, M. Pelk, 2012 .

A priori process parameter adjustment for SLM process optimization

Jean-Pierre Kruth, Tom Craeghs, Stijn Clijsters, 2012 .

Using X-ray computed tomography to improve the porosity level of polyamide-12 laser sintered parts

Wim Dewulf, Jean-Pierre Kruth, Tom Craeghs, 2016 .

On-line monitoring and process control in selective laser melting and laser cutting

Joost Duflou, Jean-Pierre Kruth, Jonas Van Vaerenbergh, 2007 .