Rigoberto C. Advincula

发表

2,2′-(1,4-Phenylene)bis(propane-2,2-diyl) bis(benzodithioate)

Javier Ellena, Rodolfo Moreno-Fuquen, Carlos Grande, 2014, Acta crystallographica. Section E, Structure reports online.

Rigoberto C. Advincula, Richard F. D’Vries, Carlos D. Grande, 2014, Acta crystallographica. Section E, Structure reports online.

Smart cements and cement additives for oil and gas operations

Rigoberto C. Advincula, Joey Dacula Mangadlao, Peng-Fei Cao, 2015 .

Engineering molecularly imprinted polymer (MIP) materials: Developments and challenges for sensing and separation technologies

Rigoberto C. Advincula, R. Advíncula, 2011 .

3D-printing and advanced manufacturing for electronics

Rigoberto C. Advincula, Alejandro H. Espera, John Ryan C. Dizon, 2019, Progress in Additive Manufacturing.

Post-Processing of 3D-Printed Polymers

Rigoberto C. Advincula, John Ryan C. Dizon, Ciara Catherine L. Gache, 2021, Technologies.

Electrochemical surface plasmon resonance and waveguide-enhanced glucose biosensing with N-alkylaminated polypyrrole/glucose oxidase multilayers.

Akira Baba, Wolfgang Knoll, Rigoberto C. Advincula, 2010, ACS applied materials & interfaces.

Surface-Grafted Polymers from Electropolymerized Polythiophene RAFT Agent

Carlos Grande, Rigoberto C. Advincula, R. Advíncula, 2011 .

Decreased Aggregation Phenomena in Polyfluorenes by Introducing Carbazole Copolymer Units

Chuanjun Xia, Rigoberto C. Advincula, R. Advíncula, 2001 .

Kinetics of the Thermal and Thermo‐Oxidative Degradation of a Polystyrene–Clay Nanocomposite

Sergey Vyazovkin, Rigoberto C. Advincula, R. Advíncula, 2004 .

Polyelectrolyte adsorption processes characterized in situ using the quartz crystal microbalance technique: alternate adsorption properties in ultrathin polymer films

Futao Kaneko, Akira Baba, Rigoberto C. Advincula, 2000 .

QCM sensing of a chemical nerve agent analog via electropolymerized molecularly imprinted polythiophene films

Rigoberto C. Advincula, Christina A. Binag, R. Advíncula, 2012 .

QCM sensing of bisphenol A using molecularly imprinted hydrogel/conducting polymer matrix

Takashi Miyata, Rigoberto C. Advincula, R. Advíncula, 2016 .

Emission light and multiple surface plasmon excitations at prism/Ag/merocyanine Langmuir-Blodgett films

Futao Kaneko, Takashi Wakamatsu, Kazunari Shinbo, 2003 .

Langmuir−Schaefer (LS) Macroinitiator Film Control on the Grafting of a Thermosensitive Polymer Brush via Surface Initiated-ATRP

Rigoberto C. Advincula, R. Advíncula, J. Y. Park, 2010 .

Dendrimer Precursors for Nanomolar and Picomolar Real‐Time Surface Plasmon Resonance/Potentiometric Chemical Nerve Agent Sensing Using Electrochemically Crosslinked Ultrathin Films

Akira Baba, Rigoberto C. Advincula, R. Advíncula, 2006 .

Polymer brushes : synthesis, characterization, applications

William J. Brittain, Jürgen Rühe, Rigoberto C. Advincula, 2004 .

Grafting Hole-Transport Precursor Polymer Brushes on ITO Electrodes : Surface-Initiated Polymerization and Conjugated Polymer Network Formation of PVK

Rigoberto C. Advincula, R. Advíncula, P. Taranekar, 2008 .

Electropolymerized Molecularly Imprinted Polymer Film: EIS Sensing of Bisphenol A

Rigoberto C. Advincula, R. Advíncula, R. Pernites, 2011 .

Simultaneous in situ electrochemical, surface plasmon optical, and atomic force microscopy measurements: Investigation of conjugated polymer electropolymerization

Akira Baba, Wolfgang Knoll, Rigoberto C. Advincula, 2006 .

High-fidelity formation of a molecular-junction device using a thickness-controlled bilayer architecture.

Hojong Chang, Gyeong Sook Bang, Hyoyoung Lee, 2008, Small.

Surface Plasmon Resonance (SPR) Detection of Theophylline via Electropolymerized Molecularly Imprinted Polythiophenes

Rigoberto C. Advincula, R. Advíncula, R. Pernites, 2010 .

Photo-Induced Alignments of Liquid Crystal Molecules on Alternate Self-Assembly Films Evaluated by the Attenuated Total Reflection Measurement

Futao Kaneko, Kazunari Shinbo, Akira Baba, 2000 .

Plasmonics and templated systems for bioapplications

Rigoberto C. Advincula, R. Advíncula, B. D. Tiu, 2015, Rendiconti Lincei.

Mussel‐Inspired Hydrogel Composite with Multi‐Stimuli Responsive Behavior

Rigoberto C. Advincula, R. Advíncula, P. Cao, 2019, Macromolecular Materials and Engineering.

Plastic Metal-Free Electric Motor by 3D Printing of Graphene-Polyamide Powder

Rigoberto C. Advincula, Emily Pentzer, Alejandro H. Espera, 2018 .

Charge-Dependent Transport Switching of Single Molecular Ions in a Weak Polyelectrolyte Multilayer

Bo Shuang, Rigoberto C. Advincula, Lydia Kisley, 2014, Langmuir : the ACS journal of surfaces and colloids.

3D Printing of Polymer Nanocomposites via Stereolithography

Rigoberto C. Advincula, Jill Z. Manapat, R. Advíncula, 2017 .

3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam

Rigoberto C. Advincula, R. Advíncula, P. Cao, 2019, Advanced Functional Materials.

Electrochemically crosslinked surface-grafted PVK polymer brushes as a hole transport layer for organic photovoltaics

Rigoberto C. Advincula, Kang-Shyang Liao, Nigel J. Alley, 2011 .

Characterization and Applications

Wolfgang Knoll, Rigoberto C. Advincula, W. Knoll, 2011 .

Photo-induced fabrication of surface relief gratings in alternate self-assembled films containing azo dye and alignments of LC molecules

Futao Kaneko, Kazunari Shinbo, Takashi Kato, 2002 .

Simultaneous surface plasmon optical and electrochemical investigation of layer-by-layer self-assembled conducting ultrathin polymer films

Akira Baba, Wolfgang Knoll, Rigoberto C. Advincula, 2002 .