Sylvester Abanteriba

发表

Investigation of Flow Separation Inside a Conical Rocket Nozzle With the Aid of an Annular Cross Flow

Alexander Weiss, Sylvester Abanteriba, Thomas Esch, 2007 .

The Development of Exhaust Surface Temperature Models for 3D CFD Vehicle Thermal Management Simulations Part 2 - Exhaust Acoustic Silencer Configurations

Sylvester Abanteriba, Kristian Haehndel, Anthony Jefferies, 2014 .

Questioning how limits are set

Sylvester Abanteriba, Andrew Becker, Paul Marsden, 2013 .

On the impact of fine filtration on spectrometric oil analysis and inductive wear debris sensors

Sylvester Abanteriba, Andrew Becker, Scott Dutton, 2016 .

An Innovative Approach to Race Track Simulations for Vehicle Thermal Management

Sylvester Abanteriba, Kristian Haehndel, Torsten Frank, 2013 .

The Analysis of the Lubrication Condition and Friction Losses of a Single Acting Cross Head Guide Shoe of a Low Speed Cross Head Diesel Engine: Part I—An Alogrithm For The Prediction of Oil Film Thickness

Sylvester Abanteriba, S. Abanteriba, 2000 .

The Development of Exhaust Surface Temperature Models for 3D CFD Vehicle Thermal Management Simulations Part 1 - General Exhaust Configurations

Sylvester Abanteriba, Kristian Haehndel, Torsten Frank, 2013 .

Improvements in the Power Output of a Horizontal Axis Wind Turbine Due to the Introduction of a Curved Blade

Sylvester Abanteriba, Erin K. Clarke, 2002 .

Analysis of the Lubrication Condition of a Crosshead Pin Bearing of a Large Marine Diesel Engine

Sylvester Abanteriba, 2005 .

Determining inductive sensor wear debris limits for rolling contact fatigue of bearings

Sylvester Abanteriba, Andrew Becker, David Forrester, 2015 .

The Analysis of the Lubrication Condition and Friction Losses of a Single Acting Cross Head Guide Shoe of a Low Speed Cross Head Diesel Engine: PART III — Friction and Its Minimization

Sylvester Abanteriba, S. Abanteriba, 2000 .

A Numerical Investigation of Dampening Dynamic Profiles for the Application in Transient Vehicle Thermal Management Simulations

Sylvester Abanteriba, Kristian Haehndel, Torsten Frank, 2014 .

Electric discharge damage in aircraft propulsion bearings

Sylvester Abanteriba, Andrew Becker, S. Abanteriba, 2014 .

The Analysis of the Lubrication Condition and Friction Losses of a Single Acting Cross Head Guide Shoe of a Low Speed Cross Head Diesel Engine: Part II — A Practical Model for the Determination of the Oil Film Thickness

Sylvester Abanteriba, S. Abanteriba, 2000 .

The Development of Turbine Volute Surface Temperature Models for 3D CFD Vehicle Thermal Management Simulations: Part 3: Exhaust Radial Turbine Volute Systems

Sylvester Abanteriba, Kristian Haehndel, Torsten Frank, 2014 .

Performance Comparison of Commercial CFD Codes for Steady-State Internal Flow Simulation of Gasoline Direct Injection

Sylvester Abanteriba, Jarrod Sinclair, 2003 .

Status of surface modification techniques for artificial hip implants

Sylvester Abanteriba, Subir Ghosh, S. Ghosh, 2016, Science and technology of advanced materials.

Development of strategic international industry links to promote undergraduate vocational training and postgraduate research programmes

Sylvester Abanteriba, S. Abanteriba, 2006 .