Ali Hassanpour

发表

Effective Mechanical Specific Energy: A New Approach for Evaluating PDC Bit Performance and Cutters Wear

Ahmed Z. Mazen, Nejat Rahmanian, Iqbal M. Mujtaba, 2021 .

Instantaneous Monitoring of Drill Bit Wear and Specific Energy as a Criteria for the Appropriate Time for Pulling Out Worn Bits

Ali Hassanpour, Rafid K. Abbas, Colin Hare, 2014 .

The induced shock and impact force as affected by the obstacle geometric factors during tire-obstacle collision dynamics

Ali Hassanpour, Chongfeng Wei, Hamid Taghavifar, 2016 .

Fully coupled LES-DEM of particle interaction and agglomeration in a turbulent channel flow

Michael Fairweather, Ali Hassanpour, M. Afkhami, 2015, Comput. Chem. Eng..

Simulations of Aerodynamic Behaviour of a Super Utility Vehicle Using Computational Fluid Dynamics

Ali Hassanpour, Ahmed Al-Saadi, Tariq Mahmud, 2016 .

Discrete Element Method Applications in Process Engineering

Ali Hassanpour, Massih Pasha, A. Hassanpour, 2014, Introduction to Software for Chemical Engineers.

Impact of shape representation schemes used in discrete element modelling of particle packing

Ali Hassanpour, Xiaodong Jia, Richard Caulkin, 2015, Comput. Chem. Eng..

Improvement of the Aerodynamic Behaviour of a Land Rover Discovery 4 in Turbulent Flow Using Computational Fluid Dynamics (CFD)

Ali Hassanpour, Tariq Mahmud, Ahmed H. Al-Saadi, 2017 .

A GPU-based coupled SPH-DEM method for particle-fluid flow with free surfaces

Ke Wu, Ali Hassanpour, Dongmin Yang, 2018, Powder Technology.

Discrete Element Method (DEM) Simulation of Powder Mixing Process

Ali Hassanpour, Mojtaba Ghadiri, A. Hassanpour, 2015 .

Analysis of Partial Electrocoalescence by Level-Set and Finite Element Methods

Barry J. Azzopardi, Ali Hassanpour, Mojtaba Ghadiri, 2016 .

Appraisal of Takagi–Sugeno type neuro-fuzzy network system with a modified differential evolution method to predict nonlinear wheel dynamics caused by road irregularities

Ali Hassanpour, Hamid Taghavifar, Aref Mardani, 2016 .

The influence of blending process on the quality of rapeseed oil-used cooking oil biodiesels

Ali Hassanpour, Jabbar Gardy, Xiaojun Lai, 2014 .

A CPU-GPU cross-platform coupled CFD-DEM approach for complex particle-fluid flows

Ali Hassanpour, Frans L. Muller, Frans Muller, 2020, Chemical Engineering Science.

The potential of Saudi Arabian natural zeolites in energy recovery technologies

Ali Hassanpour, Sandeep Kumar, Mohammad Rehan, 2016 .

Mealiness Detection in Agricultural Crops: Destructive and Nondestructive Tests: A Review

Ali Hassanpour, Kaveh Mollazade, Aoife A. Gowen, 2015 .

Mathematical modeling of sustainable energy production using nanotechnology

Ali Hassanpour, Mohamed Pourkashanian, Waqar Ahmed, 2021 .

Characterisation of Flowability of Loosely Compacted Cohesive Powders by Indentation

Ali Hassanpour, Mojtaba Ghadiri, A. Hassanpour, 2007 .

Analysis of seeded granulation in high shear granulators by discrete element method

Andrea C. Santomaso, Nejat Rahmanian, Ali Hassanpour, 2013 .

Influence of interface energy of primary particles on the deformation and breakage behaviour of agglomerates sheared in a powder bed

Ali Hassanpour, Mojtaba Ghadiri, S. Joseph Antony, 2008 .

Characterisation of flowability of cohesive powders by testing small quantities of weak compacts

Ali Hassanpour, Mojtaba Ghadiri, Chuan Wang, 2008 .

The effect of particle shape on predicted segregation in binary powder mixtures

Ali Hassanpour, Mojtaba Ghadiri, Mehrdad Pasha, 2017 .

Single and bulk compressions of soft granules: Experimental study and DEM evaluation

Ali Hassanpour, Mojtaba Ghadiri, Abdolreza Samimi, 2005 .

Effect of granulation scale-up on the strength of granules

B. H. Ng, Nejat Rahmanian, Ali Hassanpour, 2009 .

Effect of zeolite catalysts on pyrolysis liquid oil

Talal Almeelbi, Ayhan Demirbas, Ali Hassanpour, 2017 .

Distinct element analysis and experimental evaluation of the Heckel analysis of bulk powder compression

Ali Hassanpour, Mojtaba Ghadiri, A. Hassanpour, 2004 .

Mechanistic analysis and computer simulation of the aerodynamic dispersion of loose aggregates

G. Calvert, Ali Hassanpour, Mojtaba Ghadiri, 2011 .

Non-destructive identification of mealy apples using biospeckle imaging

Ali Hassanpour, Kaveh Mollazade, Arman Arefi, 2016 .

Ball Indentation on Powder Beds for Assessing Powder Flowability: Analysis of Operation Window

Ali Hassanpour, Colin Hare, Mojtaba Ghadiri, 2017 .

The potential of natural zeolites in energy recovery technology from waste plastic.pdf

Ali Hassanpour, Tariq Iqbal, Abdul-Sattar Nizam, 2014 .

Effect of size ratio on the behaviour of agglomerates embedded in a bed of particles subjected to shearing: DEM analysis

Ali Hassanpour, Mojtaba Ghadiri, S. J. Antony, 2007 .

Analysis of particle motion in a paddle mixer using Discrete Element Method (DEM)

B. H. Ng, Ali Hassanpour, Mojtaba Ghadiri, 2011 .

Coupling CFD-DEM with dynamic meshing: A new approach for fluid-structure interaction in particle-fluid flows

Ali Hassanpour, Andrew E. Bayly, Yi. He, 2018 .

Influence of contact stiffnesses on the micromechanical characteristics of dense particulate systems subjected to shearing

Ali Hassanpour, S. J. Antony, Roberto Moreno-Atanasio, 2006 .

Tribo-Electrification and Associated Segregation of Pharmaceutical Bulk Powders

Ali Hassanpour, Mojtaba Ghadiri, Tatsushi Matsuyama, 2011 .

University of Huddersfield Repository Finishing Process:

Nejat Rahmanian, Ali Hassanpour, Rafid K. Abbas, 2022 .

A linear model of elasto-plastic and adhesive contact deformation

Ali Hassanpour, Colin Hare, Mojtaba Ghadiri, 2014 .

Analysis of granule breakage in a rotary mixing drum: Experimental study and distinct element analysis

Ali Hassanpour, Mojtaba Ghadiri, Hossein Ahmadian, 2011 .

Analysis of aerodynamic dispersion of cohesive clusters

G. Calvert, Ali Hassanpour, Mojtaba Ghadiri, 2013 .

Analysis of Tribo-Electric Charging of Spherical Beads Using Distinct Element Method

Ali Hassanpour, Mojtaba Ghadiri, Tatsushi Matsuyama, 2009 .

Shear deformation of binary mixtures of dry particulate solids

Ali Hassanpour, Mojtaba Ghadiri, Yulong Ding, 2004 .

Modeling of agglomerate behavior under shear deformation: effect of velocity field of a high shear mixer granulator on the structure of agglomerates

Ali Hassanpour, Mojtaba Ghadiri, S. Joseph Antony, 2007 .

Scale-up of high shear mixer granulators

B. H. Ng, Ali Hassanpour, Mojtaba Ghadiri, 2008 .

A comparative analysis of particle tracking in a mixer by discrete element method and positron emission particle tracking

Ali Hassanpour, Mojtaba Ghadiri, Hossein Ahmadian, 2015 .