Libero Tapinassi

发表

Introduction of Circumferentially Nonuniform Variable Guide Vanes in the Inlet Plenum of a Centrifugal Compressor for Minimum Losses and Flow Distortion

Nan Chen, Alberto Scotti Del Greco, Christian Aalburg, 2016 .

Effects Due to the Temperature Measurement Section on the Performance Estimation of a Centrifugal Compressor Stage

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2012 .

Development of a Research Test Rig for Advanced Analyses in Centrifugal Compressors

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2015 .

Accuracy of Centrifugal Compressor Stages Performance Prediction by Means of High Fidelity CFD and Validation Using Advanced Aerodynamic Probe

Libero Tapinassi, Dante Tommaso Rubino, Emanuele Guidotti, 2013 .

Impact of Inlet Swirl on High-Speed High-Flow Centrifugal Stage Performance

Denis Guenard, Vittorio Michelassi, Andrea Bernocchi, 2007 .

Improving the Accuracy of Tests for Centrifugal Compressor Stage Performance Prediction

Daniele Fiaschi, Giampaolo Manfrida, Libero Tapinassi, 2006 .

On the Combined Effect on Operating Range of Adjustable Inlet Guide Vanes and Variable Speed in Process Multistage Centrifugal Compressors

Alberto Scotti Del Greco, Libero Tapinassi, 2014 .

Impact of Manufacturing Variability on the Aerodynamic Performance of a Centrifugal Compressor Stage With Curvilinear Blades

Andrea Panizza, Libero Tapinassi, Dante Tommaso Rubino, 2016 .

Analysis Of The Rotordynamic Response Of A Centrifugal Compressor Subject To Aerodynamic Loads Due To Rotating Stall

Giovanni Ferrara, Giuseppe Vannini, Lorenzo Ferrari, 2014 .

Influence of Cavity Flows Modeling on Centrifugal Compressor Stages Performance Prediction Across Different Flow Coefficient Impellers

G. Naldi, Libero Tapinassi, Dante Tommaso Rubino, 2014 .

Experimental and Numerical Analysis of the Flow Field in the Impeller of a Centrifugal Compressor Stage at Design Point

Giacomo Bruno Azzurro Persico, Paolo Gaetani, Libero Tapinassi, 2011 .

Introduction of Circumferentially Non-Uniform Variable Guide Vanes in the Inlet Plenum of a Centrifugal Compressor for Minimum Losses and Flow Distortion

Nan Chen, Alberto Scotti Del Greco, Christian Aalburg, 2015 .

Four Quadrant Centrifugal Compressor Performance

Elisabetta Belardini, Marco Pelella, Libero Tapinassi, 2016 .

A Systematic Approach to Estimate the Impact of the Aerodynamic Force Induced by Rotating Stall in a Vaneless Diffuser on the Rotordynamic Behavior of Centrifugal Compressors

Giovanni Ferrara, Giuseppe Vannini, Lorenzo Ferrari, 2013 .

The Recuperative-Auto Thermal Reforming and the Recuperative-Reforming Gas Turbine Power Cycles With CO2 Removal—Part I: The Recuperative-Auto Thermal Reforming Cycle

Daniele Fiaschi, Lidia Lombardi, Libero Tapinassi, 2003 .

Analysis of the Rotordynamic Response of a Centrifugal Compressor Subject to Aerodynamic Loads Due to Rotating Stall

Giovanni Ferrara, Giuseppe Vannini, Lorenzo Ferrari, 2015 .

Some guidelines for the experimental characterization of vaneless diffuser rotating stall in stages of industrial centrifugal compressors

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2014 .

Cavity Flow Modeling in an Industrial Centrifugal Compressor Stage at Design and Off-Design Conditions

Libero Tapinassi, G. Naldi, Emanuele Guidotti, 2012 .

The Recuperative Auto Thermal Reforming and Recuperative Reforming Gas Turbine Power Cycles With CO2 Removal—Part II: The Recuperative Reforming Cycle

Daniele Fiaschi, Lidia Lombardi, Libero Tapinassi, 2004 .

Exergy analysis of the recuperative auto thermal reforming (R-ATR) and recuperative reforming (R-REF) power cycles with CO2 removal

Daniele Fiaschi, Libero Tapinassi, 2004 .

Efficient Uncertainty Quantification of Centrifugal Compressor Performance Using Polynomial Chaos

Andrea Panizza, Libero Tapinassi, Dante Tommaso Rubino, 2014 .