Christian Mittelstedt

发表

Minimum Stiffness Criteria for Edge Reinforcements of Elastically Clamped Plates.

Philipp Weißgraeber, Christian Mittelstedt, Wilfried Becker, 2010 .

Explicit analysis and design equations for buckling loads and minimum stiffener requirements of orthotropic and isotropic plates under compressive load braced by longitudinal stiffeners

Christian Mittelstedt, C. Mittelstedt, 2008 .

On the Determination of Edge Reinforcement Properties for Optimum Lightweight Design of Composite Stiffeners

Philipp Weißgraeber, Christian Mittelstedt, Wilfried Becker, 2011 .

Semi-analytical tools for the Single Perturbation Load Approach using the Ritz Method

Richard Degenhardt, Mariano Arbelo, Saullo Castro, 2014 .

A holistic approach for local buckling of composite laminated beams under compressive load

Christian Mittelstedt, Philip Schreiber, C. Mittelstedt, 2018, Archive of Applied Mechanics.

Explicit Buckling Analysis and Design Equations for Composite Plates under Compression with Free Reinforced Edges

Christian Mittelstedt, Martin Schager, 2008 .

Local buckling analysis of omega-stringer-stiffened composite panels using a new closed-form analytical approximate solution

Christian Mittelstedt, Jakob C. Schilling, C. Mittelstedt, 2020 .

Ritz method for the analysis of unstiffened laminated composite cylinders and cones under axial compression

Richard Degenhardt, Mariano Arbelo, Christian Mittelstedt, 2014 .

Buckling of composite panels: A criterion for optimum stiffener design

Philipp Weißgraeber, Christian Mittelstedt, Wilfried Becker, 2012 .

Local postbuckling of hat-stringer-stiffened composite laminated plates under transverse compression

Kai-Uwe Schröder, Christian Mittelstedt, C. Mittelstedt, 2010 .

Three-dimensional closed-form analysis of the stress field at rectangular corners of layered plates

Christian Mittelstedt, Wilfried Becker, 2003 .

Free-Edge Effects in Composite Laminates

Christian Mittelstedt, Wilfried Becker, W. Becker, 2007 .

Weight‐Reduction of Sandwich Structures by an Efficient Topology Optimization Technique

Christian Mittelstedt, Wilfried Becker, Christian Tapp, 2004 .

Explicit local buckling analysis of stiffened composite plates accounting for periodic boundary conditions and stiffener-plate interaction

Christian Mittelstedt, C. Mittelstedt, 2009 .

Theory of Elasticity

Christian Mittelstedt, 2021, Structural Mechanics in Lightweight Engineering.

Minimum weight design of curvilinearly grid-stiffened variable-stiffness composite fuselage panels considering buckling and manufacturing constraints

Christian Mittelstedt, Ahmad Alhajahmad, C. Mittelstedt, 2021 .

Principle of Virtual Forces

Christian Mittelstedt, 2021, Structural Mechanics in Lightweight Engineering.

Principle of Virtual Displacements

Christian Mittelstedt, 2021, Structural Mechanics in Lightweight Engineering.

Shear-buckling of omega-stringer-stiffened panels

Christian Mittelstedt, Jakob C. Schilling, C. Mittelstedt, 2021 .

Strength Criteria for Isotropic Materials

Christian Mittelstedt, 2021, Structural Mechanics in Lightweight Engineering.

Energy-Based Approximation Methods

Christian Mittelstedt, 2021, Structural Mechanics in Lightweight Engineering.

Towards Enhancing the Potential of Injection Molding Tools through Optimized Close-Contour Cooling and Additive Manufacturing

Christian Mittelstedt, Sebastian Gries, Guillaume Meyer, 2021 .

Work and Energy

Christian Mittelstedt, 2021, Structural Mechanics in Lightweight Engineering.

Linear buckling predictions of unstiffened laminated composite cylinders and cones under various loading and boundary conditions using semi-analytical models

Richard Degenhardt, Christian Mittelstedt, Saullo G.P. Castro, 2014 .

Interlaminar Stress Concentrations in Layered Structures: Part II - Closed-Form Analysis of Stresses at Laminated Rectangular Wedges with Arbitrary Non-Orthotropic Layup

Christian Mittelstedt, Wilfried Becker, W. Becker, 2004 .

Micromechanical analysis of the effective properties of lattice structures in additive manufacturing

Christian Mittelstedt, C. Mittelstedt, José Souza, 2018, Additive Manufacturing.

Closed-form buckling analysis of compressively loaded composite plates braced by omega-stringers

Christian Mittelstedt, Matthias Beerhorst, C. Mittelstedt, 2009 .

A semi-analytical approach for linear and non-linear analysis of unstiffened laminated composite cylinders and cones under axial, torsion and pressure loads

Richard Degenhardt, Christian Mittelstedt, Saullo G.P. Castro, 2015 .

Evaluation of non-linear buckling loads of geometrically imperfect composite cylinders and cones with the Ritz method

Richard Degenhardt, Christian Mittelstedt, Saullo G.P. Castro, 2015 .

Free-corner Effects in Cross-ply Laminates: An Approximate Higher-order Theory Solution

Christian Mittelstedt, Wilfried Becker, W. Becker, 2003 .

Interlaminar Stress Concentrations in Layered Structures: Part I - A Selective Literature Survey on the Free-Edge Effect since 1967

Christian Mittelstedt, Wilfried Becker, W. Becker, 2004 .

Efficient computation of order and mode of three-dimensional stress singularities in linear elasticity by the boundary finite element method

Christian Mittelstedt, Wilfried Becker, W. Becker, 2006 .

Thermoelastic Fields in Boundary Layers of Isotropic Laminates

Christian Mittelstedt, Wilfried Becker, W. Becker, 2005 .

Closed-form buckling analysis of stiffened composite plates and identification of minimum stiffener requirements

Christian Mittelstedt, C. Mittelstedt, 2008 .

Weight-Minimization of Sandwich Structures by a Heuristic Topology Optimization Algorithm

Christian Mittelstedt, Wilfried Becker, W. Becker, 2004 .

Closed-form analysis of the buckling loads of uniaxially loaded blade-stringer-stiffened composite plates considering periodic boundary conditions

Christian Mittelstedt, C. Mittelstedt, 2007 .

A VARIATIONAL FINITE LAYER TECHNIQUE FOR THE INVESTIGATION OF THERMALLY INDUCED STRESS CONCENTRATIONS IN COMPOSITE STRUCTURES

Christian Mittelstedt, Wilfried Becker, 2004 .

Asymptotic analysis of stress singularities in composite laminates by the boundary finite element method

Christian Mittelstedt, Wilfried Becker, W. Becker, 2005 .

Semi-analytical computation of 3D stress singularities in linear elasticity

Christian Mittelstedt, Wilfried Becker, 2005 .

Optimization and re-design of a metallic riveting tool for additive manufacturing—A case study

Christian Mittelstedt, C. Mittelstedt, Alexander Großmann, 2020 .