Martin Désilets

发表

Prédiction par transfert inverse d’un champ de conductance thermique de contact dans un mur de réacteur métallurgique

Clément Rousseau, Marcel Lacroix, Martin Désilets, 2014 .

Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries

Marcel Lacroix, Martin Désilets, Ali Jokar, 2016 .

Fast inverse prediction of phase change banks in high temperature furnaces with a Kalman filter coupled with a recursive least-square estimator

Marcel Lacroix, Martin Désilets, Marc LeBreux, 2010 .

Prediction of the ledge thickness inside a high-temperature metallurgical reactor using a virtual sensor

Marcel Lacroix, Martin Désilets, Marc LeBreux, 2012 .

START-Cuve: Thermo-electro-mechanical transient simulation applied to electrical preheating of a Hall-Héroult cell

Daniel Marceau, Martin Désilets, Mario Fafard, 2003 .

Electricity Generation from Low Temperature Sources

Martin Désilets, Nicolas Galanis, Philippe Roy, 2009 .

Techno-economic study of CO2 capture for aluminum primary production for different electrolytic cell ventilation rates

Martin Désilets, Olivier Lassagne, Louis Gosselin, 2013 .

Optimization of an industrial heat exchanger using an open-source CFD code

Martin Désilets, Pierre Proulx, Brahim Selma, 2014 .

Techno‐economic assessment of CO2 capture from aluminum smelter emissions using PZ activated AMP solutions

Martin Désilets, Louis Gosselin, Olivier Lassagne, 2016 .

Inverse Prediction and Control of the Bank Thickness in High Temperature Metallurgical Reactors

Marcel Lacroix, Martin Désilets, Marc LeBreux, 2011 .

Measurement of the Solidification Front inside a Metallurgical Reactor

Martin Désilets, Clément Bertrand, Marc‐André Marois, 2011 .

What is the most suitable fixed grid solidification method for handling time-varying inverse Stefan problems in high temperature industrial furnaces?

Marcel Lacroix, Martin Désilets, M. Lacroix, 2012 .

Prediction of the Bank Formation in High Temperature Furnaces by a Sequential Inverse Analysis with Overlaps

Marcel Lacroix, Martin Désilets, M. Lacroix, 2011 .

A combined 2D inverse predictions and experimental analysis for the bank formation inside a metallurgical reactor

Marcel Lacroix, Martin Désilets, M. Lacroix, 2013 .

An unscented Kalman filter inverse heat transfer method for the prediction of the ledge thickness inside high-temperature metallurgical reactors

Marcel Lacroix, Martin Désilets, Marc LeBreux, 2013 .

Control of the ledge thickness in high-temperature metallurgical reactors using a virtual sensor

Marcel Lacroix, Martin Désilets, Marc LeBreux, 2012 .

Modelling of the reactive synthesis of ultra-fine powders in a thermal plasma reactor

Martin Désilets, Pierre Proulx, M. Desilets, 1997 .

Optimization of the cathode block shape of an aluminum electrolysis cell

Marcel Lacroix, Martin Désilets, M. Lacroix, 2013 .

Improved heat transfer modeling of the top of aluminum electrolysis cells

Martin Désilets, Marc LeBreux, Alexandre Blais, 2019, International Journal of Heat and Mass Transfer.

A Modeling Approach for Time-Dependent Geometry Applied to Transient Heat Transfer of Aluminum Electrolysis Cells

Martin Désilets, Alexandre Blais, M. Desilets, 2019, Metallurgical and Materials Transactions B.

Thermodynamic analysis of a power cycle using a low-temperature source and a binary NH3–H2O mixture as working fluid

Martin Désilets, Nicolas Galanis, Hakim Nesreddine, 2010 .

Prediction of the Time-Varying Ledge Profile inside a High-Temperature Metallurgical Reactor with an Unscented Kalman Filter-Based Virtual Sensor

Marcel Lacroix, Martin Désilets, Marc LeBreux, 2013 .

Modeling of multicomponent diffusion in high temperature flows

Martin Désilets, Pierre Proulx, M. Desilets, 1997 .

Is the performance of a virtual sensor employed for the prediction of the ledge thickness inside a metallurgical reactor affected by the thermal contact resistance

Marcel Lacroix, Martin Désilets, Marc LeBreux, 2014 .