Szymon Wojciechowski

发表

The study on dynamic properties of monolithic ball end mills with various slenderness

Grzegorz Krolczyk, Szymon Wojciechowski, Maciej Tabaszewski, 2017 .

The Evaluation of Surface Integrity during Machining of Inconel 718 with Various Laser Assistance Strategies

Szymon Wojciechowski, Damian Przestacki, Tadeusz Chwalczuk, 2018 .

The application of response surface method to optimization of precision ball end milling

Grzegorz Krolczyk, Szymon Wojciechowski, Radoslaw W. Maruda, 2017 .

Precision surface characterization for finish cylindrical milling with dynamic tool displacements model

Simon Barrans, Grzegorz Krolczyk, Szymon Wojciechowski, 2016 .

Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations

Simon Barrans, Grzegorz Krolczyk, Szymon Wojciechowski, 2017 .

Investigation on the edge forces in ball end milling of inclined surfaces

Grzegorz Krolczyk, Szymon Wojciechowski, Radoslaw W. Maruda, 2016 .

The estimation of cutting forces and specific force coefficients during finishing ball end milling of inclined surfaces

Szymon Wojciechowski, S. Wojciechowski, 2015 .

Turning process monitoring of internal combustion engine piston’s cylindrical surface

Szymon Wojciechowski, Maciej Tabaszewski, Paweł Twardowski, 2017 .

Mechanical and technological aspects of micro ball end milling with various tool inclinations

Szymon Wojciechowski, Krzysztof Mrozek, S. Wojciechowski, 2017 .

Modeling of cutter displacements during ball end milling of inclined surfaces

Grzegorz Krolczyk, Szymon Wojciechowski, Tadeusz Chwalczuk, 2015 .

Dry cutting effect in turning of a duplex stainless steel as a key factor in clean production

Grzegorz Krolczyk, Szymon Wojciechowski, Radoslaw W. Maruda, 2017 .

Effect of the Relative Position of the Face Milling Tool towards the Workpiece on Machined Surface Roughness and Milling Dynamics

Andres Bustillo, Danil Yu. Pimenov, Grzegorz Krolczyk, 2019, Applied Sciences.

Application of signal to noise ratio and grey relational analysis to minimize forces and vibrations during precise ball end milling

Grzegorz Krolczyk, Szymon Wojciechowski, Radoslaw W. Maruda, 2018 .

Machined Surface Roughness Including Cutter Displacements in Milling of Hardened Teel

Szymon Wojciechowski, S. Wojciechowski, 2011 .

Multi-objective Evolutionary Undersampling Algorithm for Imbalanced Data Classification

Szymon Wojciechowski, 2021, ICCS.

The influence of the cooling conditions on the cutting tool wear and the chip formation mechanism

Stanislaw Legutko, Grzegorz Krolczyk, Szymon Wojciechowski, 2016 .

Evaluation of Surface Topography after Face Turning of CoCr Alloys Fabricated by Casting and Selective Laser Melting

Szymon Wojciechowski, Bartosz Powałka, Daniel Grochała, 2020, Materials.

Cutting Forces and Vibrations During Ball End Milling of Inclined Surfaces

Szymon Wojciechowski, Marcin Pelic, Paweł Twardowski, 2014 .

Effects of extreme pressure and anti-wear additives on surface topography and tool wear during MQCL turning of AISI 1045 steel

Szymon Wojciechowski, Witold Habrat, Krzysztof Zak, 2018 .

Modeling flatness deviation in face milling considering angular movement of the machine tool system components and tool flank wear

V. I. Guzeev, Grzegorz Krolczyk, Mozammel Mia, 2018, Precision engineering.

Tool Life and Process Dynamics in High Speed Ball End Milling of Hardened Steel

Szymon Wojciechowski, Paweł Twardowski, S. Wojciechowski, 2012 .

Surface roughness analysis of hardened steel after high-speed milling.

Michał Wieczorowski, Szymon Wojciechowski, Paweł Twardowski, 2011, Scanning.

Ecological trends in machining as a key factor in sustainable production – A review

G. Budzik, Grzegorz Krolczyk, Jolanta B. Krolczyk, 2019, Journal of Cleaner Production.

Surface quality and topographic inspection of variable compliance part after precise turning

Grzegorz Krolczyk, Szymon Wojciechowski, Radoslaw W. Maruda, 2018 .

Evaluation of physical indicators and tool wear during grooving of spheroidal cast iron with a novel WCCo/cBN (BNDCC) inserts

Szymon Wojciechowski, Rafał Talar, M. Wieczorowski, 2020 .

Surface texture generation during cylindrical milling in the aspect of cutting force variations

Szymon Wojciechowski, Marcin Pelic, Paweł Twardowski, 2014 .

The study on minimum uncut chip thickness and cutting forces during laser-assisted turning of WC/NiCr clad layers

Szymon Wojciechowski, Damian Przestacki, Tadeusz Chwalczuk, 2017, The International Journal of Advanced Manufacturing Technology.

SURFACE TEXTURE ANALYSIS AFTER BALL END MILLING WITH VARIOUS SURFACE INCLINATION OF HARDENED STEEL

Michał Wieczorowski, Szymon Wojciechowski, Paweł Twardowski, 2014 .

Formation of surface layer in metal matrix composite A359/20SiCP during laser assisted turning

Szymon Wojciechowski, Damian Przestacki, P. Szymanski, 2016 .

Study on metrological relations between instant tool displacements and surface roughness during precise ball end milling

Grzegorz Krolczyk, Szymon Wojciechowski, G. Królczyk, 2018, Measurement.

Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions

Jolanta B. Krolczyk, Szymon Wojciechowski, Radoslaw W. Maruda, 2018, Measurement.

Structural and Microhardness Changes After Turning of the AISI 1045 Steel for Minimum Quantity Cooling Lubrication

Szymon Wojciechowski, Mariusz Michalski, G. Królczyk, 2016, Journal of Materials Engineering and Performance.